5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board 5 Pack

eBoot EXPSFD005850 - The higher the voltage, the lower the efficiency switching frequency: 400 KHZ Output ripple: 50 mV the higher the voltage, the greater the no-load current Conversion efficiency: < 94 % the greater the pressure difference, current, the ripple is larger Load regulation: plus or minus 0.5% voltage regulation: plus or minus 0

5% working temperature: - 40 ℃ to + 85 ℃ overall dimensions: 43 mm x 21 mm to 14 mm length x width x height Attention: do not plug this booster to your project before adjusting the potentiometer. With mounting holes There are two mounting holes on the diagonal side, the holes are 0139 inches/ 3. 53 mm, it is a good efficiency non-isolated boost module.

Please check if the negative and positive terminals are accessed correctly before operating. Input: dc 3 v to 30 v, optimum operating voltage range: 5v to 30V; Output: DC 5 V to 35 V voltage is continuously adjustable, maximum output current is 4 A. Step-up boost converter module: they can fix on the emergency lamp or other electronic devices between the corresponding voltage range, DIY an output adjustable mobile power, boost charger, etc.

5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board 5 Pack - Dsn6009 is a good-performance 400khz 4a switch currency step-up boost module; This module XL6009E1 is coming with the 3rd generation high-frequency switch technology as the core chip, the performance is much higher than LM2577. Xl6009 dc-dc adjustable step-up power converter module, the step-up circuit board is a good efficiency non-isolated boost module.

Specifications dsn6009 booster module nature of the module: unfenced step-up boost rectifying way: synchronous rectifier Input range: 3 V to 32 V Output range: 5 V to 35 V Input current 4 A maximum, no-load 18 mA 5 V input, 8 V output, no-load less than 18 mA.

More information about eBoot EXPSFD005850

6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack

eBoot EXPSFD005794 - Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. Eboot 6 pack lm2596 dc to DC Buck Converter 3. 0-40v to 1. 5-35v power supply step down module features: Input: DC 3 V to 40 V input voltage must be 1. 5 v higher than the output voltage, no boost Output: DC 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A Notes: The input and output interface can not be reversed.

Keep it under 2. 5 a and use the heat sink when working for long hours. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output.

6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack - Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

More information about eBoot EXPSFD005794


Similar products



bayite 3 Wire 0.36" DC 0~30V Digital Voltmeter Gauge Tester Blue LED Display Panel Mount Car Motorcycle Battery Monitor Volt Voltage Meter with Reverse Polarity Protection Pack of 5

bayite CECOMINOD000239 - Reverse polarity protection: The meter won't burn out if reverse polarity is applied, but the screen will display nothing. Features: cutting size: 23mm x 14mm/09" x 055", thickness: 10mm/039" mounting hole center distance: 28mm measure voltage: dc 0~30v working Voltage: DC 3V-30V Measurement Accuracy: 1% + / - 2 digit Display: Three 0

36" digital led tube display color: blue refresh rate: about 500ms / times operating temperature: 14 ~ 149 °F-10 ~ 65 °C Reverse protection: Yes When measured voltage is below 10V: the voltmeter displays two decimal digits, for example, 5. 32v when measured voltage is larger than 10V, the voltmeter displays one decimal digit, for example, 10.

5v wiring: red wire: power supply + black wire:power supply -, measured voltage - White wire: Measured Voltage + Package Includes: 5x DC 0-30V Voltmeter Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. 3 wires. Operating temperature: 14 ~ 149 °F-10 ~ 65 °C.

bayite 3 Wire 0.36" DC 0~30V Digital Voltmeter Gauge Tester Blue LED Display Panel Mount Car Motorcycle Battery Monitor Volt Voltage Meter with Reverse Polarity Protection Pack of 5 - Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down. Working voltage: DC 3V-30V.

Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer.

More information about bayite CECOMINOD000239


Similar products



Makerfocus 10pcs TP4056 Charging Module 5V Micro USB 1A 18650 Lithium Battery Charging Board with Protection Charger Module

Makerfocus . - Display color: blue. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Working voltage: DC 3V-30V. Features:input voltage: 5VCharging cut-off voltage: 4. 2v ± 1%maximum charge current: 1000mABattery over-discharge protection voltage: 2. 5vbattery overcurrent protection current: 3ABoard size: 2.

6 * 1. 7cmpackage including10 * tp4056 charging Module Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. 3 wires. Note that the charger must be able to output 1A or more to do when using a mobile phone charger input, or may not charge. Micro usb female and next - pads for the power input, access 5V.

Makerfocus 10pcs TP4056 Charging Module 5V Micro USB 1A 18650 Lithium Battery Charging Board with Protection Charger Module - Tutorial video: https://www. Youtube. Com/watch?v=Qw4psECqpwI. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

Measurement Accuracy: 1%. Display: three 036" digital led tube.

More information about Makerfocus .


Similar products



CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board With Protection Charger Module

CHENBO 4333092022 - Connect the battery to the b + b-, the red light is being charged, inserted into the USB female mobile phone charger, the green light to full. Inputs with micro usb female, can be directly input to do with the phone charger rechargeable lithium battery. The screw on the back is used to calibrate the reading.

B + positive then the lithium battery, B- then negative lithium batteries. Measurement Accuracy: 1%. Out + and out- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load. Input voltage: 5V Charging cut-off voltage: 4. 2v ± 1% maximum charge current: 1000mA Battery over-discharge protection voltage: 2.

CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board With Protection Charger Module - 5v battery overcurrent protection current: 3A Board size: 2. 6 * 1. 7cm note: the first time you access the battery, and the battery from the b + b-, it may no voltage between the output OUT + and OUT-, then access 5V voltage charge your energy can activate the protection circuit, then draw a line on the short open also need recharged to activate the protection circuit.

Charging cut-off voltage: 4. 2v ± 1%; maximum charge current: 1000mA. Input voltage: 5v; battery over-discharge protection voltage:2. 5v; batteryovercurrent protection current: 3a; connect the battery to the B + B-, inserted into the USB female mobilephone charger, the red light is being charged, the green light to full.

More information about CHENBO 4333092022


Similar products



yueton Pack of 10 Wire Lead Battery Storage Box Case Holder for 18650 Button Top Single Battery

yueton - Connect the battery to the b + b-, the red light is being charged, inserted into the USB female mobile phone charger, the green light to full. Inputs with micro usb female, can be directly input to do with the phone charger rechargeable lithium battery. Input voltage: 5V. Wire lead battery case for 18650 Color: black Material: plastic and metal Size: 7.

5*2*2cm wire length: approx 13cm This battery box holder with wire connector, fit for 18650 batteries. Measure voltage: DC 0~30V. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Able to measure the voltage that is below 3V. Reverse polarity protection: The meter won't burn out if reverse polarity is applied, but the screen will display nothing.

yueton Pack of 10 Wire Lead Battery Storage Box Case Holder for 18650 Button Top Single Battery - Package includes 10 battery case holders. Charging cut-off voltage: 4. 2v ± 1%. Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output. Maximum charge current: 1000mA. Operating temperature: 14 ~ 149 °F-10 ~ 65 °C. Inputs with micro usb female, can be directly input to do with the phone charger rechargeable lithium battery, And still retains the input voltage wiring pads, can be very convenient DIY.

More information about yueton


Similar products



8-PACK LM2596 DC-DC Adjustable Buck Converter 3-40 V to 1.5-35v Step Down Power Supply High Efficiency Voltage Regulator Module ...

D-PLANET 5864305192 - Charging cut-off voltage: 4. 2v ± 1%; maximum charge current: 1000mA. Input voltage: 5v; battery over-discharge protection voltage:2. 5v; batteryovercurrent protection current: 3a; connect the battery to the B + B-, the red light is being charged, inserted into the USB female mobilephone charger, the green light to full.

The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly. We have a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking for your consultation!

8-PACK LM2596 DC-DC Adjustable Buck Converter 3-40 V to 1.5-35v Step Down Power Supply High Efficiency Voltage Regulator Module ... - Measurement Accuracy: 1%. 2. Adjust the blue potentiometer knob usually clockwise rotation boost, counterclockwise rotation Step-down and monitor the output voltage with a multimeter to reach the required voltage. 3. A customer reflects the module output voltage can not be adjusted, always equal to the input voltage.

Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output. Maximum charge current: 1000mA.

More information about D-PLANET 5864305192


Similar products



Gowoops 5PCS 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Module Adjustable Power Voltage

Gowoops LYSB01GRIQBRY-ELECTRNCS - Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output. Working voltage: DC 3V-30V. Display: three 036" digital led tube. Color: black;inner size: 2-3/4L x 5/8w inch. The screw on the back is used to calibrate the reading. Able to measure the voltage that is below 3V.

Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Conversion efficiency: 94% for reference: when Input 19V 2. 5a output 16V. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. With over-temperature and short-circuit protection, hence it is safe to use. Easy to make it work and convenient to accurately adjust the output voltage with a mini screwdriver.

Gowoops 5PCS 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Module Adjustable Power Voltage - 100% satisfication service: if there are any problem with our products, please feel free to contact us. Output voltage range:output: dc 1. 5 - 35 v voltage is continuously adjustable, maximum output current is 3 A. Charging cut-off voltage: 4. 2v ± 1%.

More information about Gowoops LYSB01GRIQBRY-ELECTRNCS


Similar products



6 Pack Mini MP1584EN DC-DC Buck Converter Adjustable Power Step Down Module 24V to 12V 9V 5V 3V 6 Pack

eBoot SE153 - Eboot mini mp1584en dc to dc buck converter adjustable power step down module 24V to 12V 9V 5V 3V, 6 Pack Specifications: Input voltage: 4. 5 v to 28 v output voltage: 08 v to 20 v output current: 3 a maximum conversion efficiency: 92% maximum Output ripple: less than 30 mV Switching frequency: 1. 5 mhz highest, power buggies, communications equipment supply, typically 1 mhz Operating temperature: -45 ℃ to 85 ℃ Size: 22 mm by 17 mm by 4 mm Application: DIY mobile power, monitor power supply, camera power supply, car power, etc.

Color: black;inner size: 2-3/4L x 5/8w inch. Operating temperature: -45 ℃ to 85 ℃; size: 22 mm by 17 mm by 4 mm; warning: do not reverse the positive and negative terminals to avoid any possible damage; Do not use light load less than 10% of output power or without load. Working voltage: DC 3V-30V.

6 Pack Mini MP1584EN DC-DC Buck Converter Adjustable Power Step Down Module 24V to 12V 9V 5V 3V 6 Pack - Convenient for diy -- you can use this module to DIY an output-adjustable car power supply. Conversion efficiency: 94% for reference: when Input 19V 2. 5a output 16V. Input voltage: 4. 5 v to 28 v; output voltage: 08 v to 20 V. Display: three 0

More information about eBoot SE153


Similar products



Icstation MT3608 Mico USB DC 2V-24V to 5V-28V 2A Boost Converter, Voltage Regulator, Booster, Step Up Power Supply Module 3.3V 5V 6V 9V 12V to 5V 6V 9V 12V 24V Pack of 4

Icstation MT3608 DC-DC Step Up Voltage Regulator - Input voltage: dc 10v-32v, output voltage: DC12V-35Vadjustable. When receive the voltage booster module, rotate the potentiometer with 15 laps in clockwise direction, before power on it. Fulfilled by amazon usually spend 2-4 days to delivery, and fulfilled by seller usually delivery in around 17 days, with tracking information.

This is a boost converter module, for example, please turn the potentiometer clockwise by more than 10 turns before test, so the output voltage should be at least 2V higher than the input voltage. Input current: 16a max, Output current: 10A MAX. You can request a refund for any single module and no need to return it.

Icstation MT3608 Mico USB DC 2V-24V to 5V-28V 2A Boost Converter, Voltage Regulator, Booster, Step Up Power Supply Module 3.3V 5V 6V 9V 12V to 5V 6V 9V 12V 24V Pack of 4 - Any problems you can contact us and we will try our best to resolve it till you satisfied. Note:the factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down. This is a boost converter module, so the output voltage should be at least 2V higher than the input voltage.

2. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down. Measurement Accuracy: 1%.

Material: plastic and metal.

More information about Icstation MT3608 DC-DC Step Up Voltage Regulator


Similar products



Erayco 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module

Erayco . - 3 wires. Tutorial video: https://www. Youtube. Com/watch?v=Qw4psECqpwI. Convenient for diy -- you can use this module to DIY an output-adjustable car power supply. Input voltage: 5V. Connect the battery to the b + b-, the red light is being charged, inserted into the USB female mobile phone charger, the green light to full.

Inputs with micro usb female, can be directly input to do with the phone charger rechargeable lithium battery. Charging cut-off voltage: 4. 2v ± 1%. Battery type: 18650 3. 7v. When receive the voltage booster module, rotate the potentiometer with 15 laps in clockwise direction, before power on it. Fulfilled by amazon usually spend 2-4 days to delivery, and fulfilled by seller usually delivery in around 17 days, with tracking information.

Erayco 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module - High precision】the buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Operating temperature: -45 ℃ to 85 ℃; size: 22 mm by 17 mm by 4 mm; warning: do not reverse the positive and negative terminals to avoid any possible damage; Do not use light load less than 10% of output power or without load.

Erayco 10 pack lm2596 dc to DC Buck Converter 3. 0-40v to 1. 5-35v power supply step down module features: - dc to dc step down module - Thickened circuit boards - Advanced solid-state capacitor - Short circuit and over-temperature protection - 100% tested, sealed in anti-static packaging Kindly Note: 1.

More information about Erayco .


Similar products