AIMS Power 6000 Watt Pure Sine Inverter Charger 48Vdc & 240Vac Input to 120 and 240Vac Output 50 or 60Hz

#ad
AIMS POWER PICOGLF60W48V240VS #ad - Homes, rvs, solar, boats, mobile business & work trucks. All tech and warranty support in Nevada. In business for over 20 year. 24 volt more efficient and can use smaller cables. Aims power brings 20 years of experience and stellar customer service with this 6000 watt pure sine inverter charger, 48 vdc input, uses 240v input and 20-30% less energy from ac input than a standard charger the overload capacity is 18000 watts, pure sine clean power, 48vdc, idle consumption and minimum thd the ac battery priority switch and auto generator start functionality make it ideal to work in either backup power or renewable energy applications the conformal coating on this inverter protects it against atmospheric water vapor and condensation while remaining fully operational In AC priority mode, with power factor corrected, low frequency, heavy duty transformers have been consistently improved over the  years to achieve the best balance of conversion efficiency, 120/240 VAC split phase, the transfer relay is de-energized and the load is automatically transferred to the inverter output Once the qualified AC utility is restored, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 92%  It features power factor corrected, 300% of continuous output for up to 20 seconds to reliably support tools and equipmentThe high quality, when utility AC power cuts off, 240V input VAC to 120/240V AC split phase output This low frequency unit is a combination of an DC to AC power inverter, an electrical generator can be integrated into the system as a backup and started when the battery voltage gets low Powerful: 6000w continuous, 50 amps, 18000w surge for 20 seconds, the relay is energized and the load is automatically transferred to AC utilityWhen customized to battery priority mode via the DIP switch, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without damaging the equipmentThe powerful 60 amp battery charger, the inverter will extract power from external power sources in renewable energy systems and a minimal cycle of the battery will be required With the availability of the auto generator start, auto transfer switch and 60A smart battery charger for 8 different battery technologies including lithium.

Protections: overload, low voltage, over temp, internally fused, high voltage, low and high voltage alarm, cooling fan, short circuit, and isolated ground neutral. Features: ac direct connect terminal block, conformal coated, charge current control dial, dip switches to set priorities, auto gen start, power save mode and battery temp sensor.

AIMS Power 6000 Watt Pure Sine Inverter Charger 48Vdc & 240Vac Input to 120 and 240Vac Output 50 or 60Hz #ad - Optional remote available.

More information about AIMS POWER PICOGLF60W48V240VS #ad

RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect

#ad
Renogy 5MC4 #ad - This is to ensure the long term durability. You can feel that they are heavier & sturdier than other similar products in the market. Description renogy cable connectors are made with highest quality materials. Renogy mc4 male/female solar panel cable connectors five pairs of mc4 solar panel cable connectors ten silver plated copper rated current: 30A Wiring size range: 10, 12 AWG contact resistance: contact material: silver plated copper insulation material: PA/pc warranty information 1-year material warranty.

More information about Renogy 5MC4 #ad


Similar products



AIMS Power PICGLFBATS Battery Temperature Sensor for Power Inverter Chargers

#ad
AIMS POWER PICGLFBATS #ad - These connectors are also waterproof and resist dust build up. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. These connectors are designed to complete a solar panel PV array, typically in parallel applications.

This allows careful monitoring of the batteries for extended life and longevity. 32 ft cable length. Allows for careful monitoring of batteries for extended life and longevity. Compatible with new models of AIMS Power Pure Sine Inverter Chargers. Renogy mc4 cable Connectors are made with highest quality materials.

AIMS Power PICGLFBATS Battery Temperature Sensor for Power Inverter Chargers #ad - This is the aims power battery Temperature Sensor for the Low Frequency Inverters models.

More information about AIMS POWER PICGLFBATS #ad


Similar products



SELTERM 10 Pack 2 Gauge 2 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

#ad
SELTERM #ad - Allows for careful monitoring of batteries for extended life and longevity. Corrosion free Ideal for Marine Automotive or Outdoor Use. To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product.

Compatible with new models of AIMS Power Pure Sine Inverter Chargers. Renogy mc4 cable Connectors are made with highest quality materials. Close end pad seals Out Moisture Keeping Cables Dry. Ul tested & Approved. 32 ft cable length. Can be Crimped or Soldered. These connectors are designed to complete a solar panel PV array, typically in parallel applications.

SELTERM 10 Pack 2 Gauge 2 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets #ad - The battery Cable lugs meet S. A. E conductivity standards and are tested to UL 486 with voltage rating of up to 600 V. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. Made from 100% annealed Tinned Copper for Max Current Flow.

These connectors are also waterproof and resist dust build up.

More information about SELTERM #ad


Similar products



Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors

#ad
TOOL-MC4 TOOL-MC4 #ad - These connectors are designed to complete a solar panel PV array, typically in parallel applications. The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors.

For breaking connections after they have already been locked together. 32 ft cable length. Close end pad seals Out Moisture Keeping Cables Dry. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. These connectors are also waterproof and resist dust build up.

Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors #ad - Renogy mc4 cable Connectors are made with highest quality materials. Hard plastic. Allows for careful monitoring of batteries for extended life and longevity. Corrosion free Ideal for Marine Automotive or Outdoor Use. Very handy for the assembly of custom Mc4 wires. Ul tested & Approved. Made from 100% annealed Tinned Copper for Max Current Flow.

Can be Crimped or Soldered.

More information about TOOL-MC4 TOOL-MC4 #ad


Similar products



SELTERM UL Listed Heavy Duty Wire Lugs Battery Cable Ends Bare Copper Eyelets Tubular Ring Terminal Connectors

#ad
SELTERM #ad - Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed. Hard plastic. Allows for careful monitoring of batteries for extended life and longevity. Ul tested & Approved. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard.

SELTERM UL Listed Heavy Duty Wire Lugs Battery Cable Ends Bare Copper Eyelets Tubular Ring Terminal Connectors #ad - The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Lugs are suitable for use with Welding Cables and Battery Cables. Very handy for the assembly of custom Mc4 wires. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Close end pad seals Out Moisture Keeping Cables Dry.

Ul tested & Approved. 32 ft cable length. 100% compatible with Renogy MC4 connectors. Heavy duty construction for Enhanced High Temperature Durability. Can be Crimped or Soldered. These connectors are also waterproof and resist dust build up. Made from 100% annealed Tinned Copper for Max Current Flow.

More information about SELTERM #ad


Similar products



Midnite Solar-MNEPV15

#ad
Midnite Solar MNEPV15 #ad - Can be Crimped or Soldered. Ul tested & Approved. Dc circuit breaker. Very handy for the assembly of custom Mc4 wires. 100% compatible with Renogy MC4 connectors. Allows for careful monitoring of batteries for extended life and longevity. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions.

Can be Crimped or Soldered. Close end pad seals Out Moisture Keeping Cables Dry. Ul tested & Approved. Mid nite solar. Corrosion free Ideal for Marine Automotive or Outdoor Use. Close end pad seals Out Moisture Keeping Cables Dry. 150 vdc 15 amp. These connectors are also waterproof and resist dust build up. These connectors are designed to complete a solar panel PV array, typically in parallel applications.

Midnite Solar-MNEPV15 #ad - Compatible with new models of AIMS Power Pure Sine Inverter Chargers. For breaking connections after they have already been locked together. Heavy duty construction for Enhanced High Temperature Durability.

More information about Midnite Solar MNEPV15 #ad


Similar products



ECO LLC 4 String PV Combiner Box with Lighting Arrester, 10A Rated Current,Universal Solar Panel Connectors,Grounding Bus-Bar Ideal For Off-grid Solar System

#ad
ECO LLC #ad - Corrosion free Ideal for Marine Automotive or Outdoor Use. Mid nite solar. 4 string configuration, 10a rated Current and 12A Fuse For Each String. Each string is equipped with High-Voltage Fuses With Over-Voltage and Over-Current Protection. Equipped with special high-voltage lightning Protection Device for Photovoltaics, Positive and Negative Electrodes Are Also Equipped with Lightning Protection.

Photovoltaic special high-voltage circuit breaker control Output, Waterproof and Dustproof, Safe and Reliable, Providing Short-Circuit Fault Protection, Leakage Protection, Protection Class Up To IP65. The patron saint of solar photovoltaic System, Applies To Maximum 10000W PV system. Close end pad seals Out Moisture Keeping Cables Dry.

ECO LLC 4 String PV Combiner Box with Lighting Arrester, 10A Rated Current,Universal Solar Panel Connectors,Grounding Bus-Bar Ideal For Off-grid Solar System #ad - Ul tested & Approved. Can be Crimped or Soldered. For breaking connections after they have already been locked together. 150 vdc 15 amp. Specification:input string :4 lineseach string rated current:10aeach circuit breaker:12a max total dc output current :40a max input voltage rating:250v max output voltage rating:250V Protection Grade :IP65 Operational Environment Temperature :-30~+70℃ Relative Humidity :0-95% Cooling Method :Natural Cooling Surge Lightning Protection:YesDimension:220*170*110mmShipping Weight :2KGInstallation and Precautions :-Check the high-voltage fuses at regular intervals to prevent the solar panel from being open after the high-voltage fuses fused.

The input and output of the PV can not be reversed, otherwise the post stage equipment may not work or even damage other equipment. When testing or maintaining this equipment, you need to notice that both the input and output port may be charged, please prevent electric shock or damage to other equipment.

More information about ECO LLC #ad


Similar products



MidNite Solar MNPV6 Photovoltaic Combiner Enclosure Only; Includes 15 Position PV Negative Bus Bar, 14 Position Ground Bus Bar, 120 Amp Plus Bus Bar for Breakers and 80 Amp Bus Bar for Fuses

#ad
MidNite Solar MNPV6 #ad - Gray aluminum type 3r rainproof enclosure with insulating dead front, will accept six 150VDC breakers or 4 600VDC fuse holders. Ul tested & Approved. 100% compatible with Renogy MC4 connectors. Dc circuit breaker. Hard plastic. These connectors are designed to complete a solar panel PV array, typically in parallel applications.

Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Can be Crimped or Soldered. These connectors are also waterproof and resist dust build up. Mid nite solar. 4 string configuration, 10a rated Current and 12A Fuse For Each String. Each string is equipped with High-Voltage Fuses With Over-Voltage and Over-Current Protection.

MidNite Solar MNPV6 Photovoltaic Combiner Enclosure Only; Includes 15 Position PV Negative Bus Bar, 14 Position Ground Bus Bar, 120 Amp Plus Bus Bar for Breakers and 80 Amp Bus Bar for Fuses #ad - Equipped with special high-voltage lightning Protection Device for Photovoltaics, Positive and Negative Electrodes Are Also Equipped with Lightning Protection. Photovoltaic special high-voltage circuit breaker control Output, Providing Short-Circuit Fault Protection, Waterproof and Dustproof, Safe and Reliable, Leakage Protection, Protection Class Up To IP65.

The patron saint of solar photovoltaic System, Applies To Maximum 10000W PV system. Includes 15 position pv negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 amp bus bar for fuses. Ul tested & Approved.

More information about MidNite Solar MNPV6 #ad


Similar products



AIMS Power REMOTELF Remote Switch with LCD Monitoring Screen

#ad
AIMS POWER REMOTELF #ad - Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers. Type 3R environmental rating. These connectors are also waterproof and resist dust build up. Can be Crimped or Soldered. Renogy mc4 cable Connectors are made with highest quality materials. Listed by etl for US & Canada. This remote display panel is for the newest AIMS Power PICOGLF series pure sine inverter chargers.

AIMS Power REMOTELF Remote Switch with LCD Monitoring Screen #ad - This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. 150 vdc 15 amp. Ul tested & Approved. These connectors are designed to complete a solar panel PV array, typically in parallel applications. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

Ac input voltage and ac output voltage. Hard plastic. Load Percentage Monitoring. Close end pad seals Out Moisture Keeping Cables Dry. Comes with 60 foot connection cable. Frequency Monitoring.

More information about AIMS POWER REMOTELF #ad


Similar products