AIMS Power PICOGLF40W24V120V 4000 Watt Pure Sine Inverter Charger, 24Vdc To 120Vac Output, Remote Panel Available, Auto Frequency, Terminal Block, Multi Stage Smart Charger, 7 Battery Type Settings

AIMS Power PICOGLF40W24V120V - Key features 4000w low frequency inverter 12000w surge for 20 seconds 300% surge capability 24 volt dc battery priority selector terminal block marine coated and protected multi stage smart charger 50A Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode 7 battery type settings for charger Selectable Charge setting based on battery type Adjustable charge current off-20%-100% Four Stage Smart Charger 40A automatic transfer switch Specifications Output Voltage 100-110-120Vac Nominal Efficiency: >88% Peak Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0

3hz / 60hz +/- 03hz typical transfer Time: 10ms THD:. Aims power picoglf40w24v120v 24 volt low frequency pure sine inverter charger, 4000w low frequency inverter, battery priority Selector, 12000W surge for 20 seconds 300% surge capability, Terminal Block The AIMS Power 4000W 24 volt pure sine low frequency inverter charger is one of the best in its class.

AIMS Power PICOGLF40W24V120V 4000 Watt Pure Sine Inverter Charger, 24Vdc To 120Vac Output, Remote Panel Available, Auto Frequency, Terminal Block, Multi Stage Smart Charger, 7 Battery Type Settings - Its high-wattage capacity allows for use in almost any application, and this inverter chargers 24V capacity allows for maximum efficiency.

More information about AIMS Power PICOGLF40W24V120V

AIMS Power REMOTELF Remote Switch with LCD Monitoring Screen

AIMS Power REMOTELF - This remote display panel is for the newest AIMS Power PICOGLF series pure sine inverter chargers. Frequency Monitoring. Only works on picoglf models purchased afTER 12/01/14. Load Percentage Monitoring. Battery voltage. Comes with 60 foot connection cable. Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers.

Ac input voltage and ac output voltage. Comes with 60 foot connection cable.

More information about AIMS Power REMOTELF


Similar products



AIMS Power PICGLFBATS Battery Temperature Sensor for Power Inverter Chargers

AIMS Power PICGLFBATS - Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers. Load Percentage Monitoring. Ac input voltage and ac output voltage. 32 ft cable length. Allows for careful monitoring of batteries for extended life and longevity. Comes with 60 foot connection cable. This is the aims power battery Temperature Sensor for the Low Frequency Inverters models.

Battery voltage. Compatible with new models of AIMS Power Pure Sine Inverter Chargers. This allows careful monitoring of the batteries for extended life and longevity. Frequency Monitoring. Only works on picoglf models purchased afTER 12/01/14.

More information about AIMS Power PICGLFBATS


Similar products



Outback Flexmax 80 FM80 MPPT 80 AMP Solar Charge Controller

Outback FM80 - Flexmax80 fm80-150vdc charge controller flexmax mppt charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system. With the technology of active cooling and intelligent thermal management cooling, the FLEXmax charge controllers can operate at their full maximum current rating in ambient temperatures as high as 104F 40C Optional Remote Temp Sensor Recommended for optimal operation- Sold separately.

Specifications: nominal battery Voltages: 12, 24, 36, 48 Battery voltage. Programmable battery Voltages from 12 VDC to 60 VDC. Load Percentage Monitoring. 32 ft cable length. Developed by outback power, its features include support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank.

Outback Flexmax 80 FM80 MPPT 80 AMP Solar Charge Controller - The flexmax family of charge controllers is the latest advanced improvement in Maximum Power Point Tracking MPPT charge controllers from OutBack Power Systems. Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers. Fully outback network integration Capable with use of the OutBack HUB - Sold separately.

Programmable to charge battery Voltages from 12 VDC to 60 VDC. Advanced continuous maximum Power Point Tracking Increases PV Array Output by up to 30%.

More information about Outback FM80


Similar products



On-Off - BEP 701 Battery Switches

Marinco 701 - Frequency Monitoring. 32 ft cable length. Load Percentage Monitoring. All bep switches are tested Independently to this specification by a 3rd party laboratory. The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C 212 deg F above the ambient temperature.

Only works on picoglf models purchased afTER 12/01/14. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Allows for careful monitoring of batteries for extended life and longevity. This control knob also features an interchangeable labeling system allowing a full range of applications Item # 713 or 715.

On-Off - BEP 701 Battery Switches - Programmable to charge battery Voltages from 12 VDC to 60 VDC. Advanced continuous maximum Power Point Tracking Increases PV Array Output by up to 30%. Backlit 80 character-display shows the current operational status. Input pv voltages up to 150vdc open circuit for charging battery banks from 12-60VDC. Gets more amp hours from your solar panels into your batteries everyday.

Operation: on/off, voltage: 48v dc, rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, 1250a dc cranking 10 sec, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

More information about Marinco 701


Similar products



Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors

TOOL-MC4 TOOL-MC4 - Only works on picoglf models purchased afTER 12/01/14. The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors. Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers.

Battery voltage. Ignition protected. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Frequency Monitoring. Hard plastic. This ensures the switch meets ABYC requirements. Load Percentage Monitoring. Control knob can be removed by switching to counter-clockwise 45° position.

Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors - 100% compatible with Renogy MC4 connectors. For breaking connections after they have already been locked together. 32 ft cable length. Ac input voltage and ac output voltage. Comes with 60 foot connection cable.

More information about TOOL-MC4 TOOL-MC4


Similar products



SELTERM 15 Pack 2/0 Gauge 2/0 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

SELTERM - Load Percentage Monitoring. Very handy for the assembly of custom Mc4 wires. Ul tested & Approved. 100% compatible with Renogy MC4 connectors. Heavy duty construction for Enhanced High Temperature Durability. Ignition protected. Programmable to charge battery Voltages from 12 VDC to 60 VDC. Advanced continuous maximum Power Point Tracking Increases PV Array Output by up to 30%.

Backlit 80 character-display shows the current operational status. Input pv voltages up to 150vdc open circuit for charging battery banks from 12-60VDC. Gets more amp hours from your solar panels into your batteries everyday. Operation: on/off, 455a dc intermittent 5 min, voltage: 48v dc, rating: 275A DC Continuous 1hr, 1250a dc cranking 10 sec, Stud Size: 2x3/8" 10mm.

SELTERM 15 Pack 2/0 Gauge 2/0 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug - Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. 32 ft cable length. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Battery voltage. Tin-plated copper studs and nuts.

Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product.

More information about SELTERM


Similar products



Signstek MC3 MC4 Solar Crimping Tools for 2.5-6.0mm² Solar Panel PV Cable

Signstek - Comes with 60 foot connection cable. Lcd remote panel for use with aIMS Power PICOGLF series Pure Sine Inverter Chargers. Ignition protected. Specification: awg:26-10AWG Crimping Range: 2. 5-6mm² model: ly-2546b mc4 solar crimping tools application: for non-insulated open plug-type connector Material:High carbon steel Weight: 550(g) Warranty: We only provide best quality products and best services for our customers.

We provide our customer guarantee and urgent response. Please feel free to contact us if you have any questions. Close end pad seals Out Moisture Keeping Cables Dry. For breaking connections after they have already been locked together. Only works on picoglf models purchased afTER 12/01/14. Ac input voltage and ac output voltage.

Signstek MC3 MC4 Solar Crimping Tools for 2.5-6.0mm² Solar Panel PV Cable - . Ul tested & Approved. Load Percentage Monitoring. This ensures the switch meets ABYC requirements. Package: 1xWire Crimper Battery voltage. Portable style with perfect handle gripping position, light weight, logical structure and perfect handle shape design.

More information about Signstek


Similar products



RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect

Renogy 5MC4 - You can feel that they are heavier & sturdier than other similar products in the market. This is to ensure the long term durability. Description renogy cable connectors are made with highest quality materials. Renogy mc4 male/female solar panel cable connectors five pairs of mc4 solar panel cable connectors ten silver plated copper rated current: 30A Wiring size range: 10, 12 AWG contact resistance: contact material: silver plated copper insulation material: PA/pc warranty information 1-year material warranty.

More information about Renogy 5MC4


Similar products



SELTERM 15 Pack 1/0 Gauge 1/0 AWG 5/16" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

SELTERM - 100% compatible with Renogy MC4 connectors. To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117. Load Percentage Monitoring. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. Made from 100% annealed Tinned Copper for Max Current Flow.

Control knob can be removed by switching to counter-clockwise 45° position. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. For breaking connections after they have already been locked together. Hard plastic. Compatible with new models of AIMS Power Pure Sine Inverter Chargers. Hardened and durable steel construction for years of reliable services.

SELTERM 15 Pack 1/0 Gauge 1/0 AWG 5/16" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets - The design of accurate crimping moulds and complete locking ensure high of crimping quality when crimping repeatedly. High transmission of force to reduce the working fatigue according to lever control. Portable style with perfect handle gripping position, logical sructure and perfect handle shape design matching human being engineering principle, light weight, it guarantees perfect crimping effect.

Easy to operate while using pliers, just insert the top into its position and press it. Renogy mc4 cable Connectors are made with highest quality materials.

More information about SELTERM


Similar products



Blue Sea Systems 2315 Minibus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with Cover

BLW6A 2315 - Ul tested & Approved. Frequency Monitoring. Busbar, mfg# 2315, common bus with four #10-24 studs. Programmable to charge battery Voltages from 12 VDC to 60 VDC. Advanced continuous maximum Power Point Tracking Increases PV Array Output by up to 30%. Backlit 80 character-display shows the current operational status.

Input pv voltages up to 150vdc open circuit for charging battery banks from 12-60VDC. Gets more amp hours from your solar panels into your batteries everyday. Operation: on/off, rating: 275a dc continuous 1hr, voltage: 48v dc, 1250a dc cranking 10 sec, 455a dc intermittent 5 min, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

Blue Sea Systems 2315 Minibus 100 Ampere Common BusBar 4 x 10-32 Stud Terminal with Cover - Load Percentage Monitoring. For breaking connections after they have already been locked together. Battery voltage. 32 ft cable length. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. Comes with 60 foot connection cable.

Continuous rating: 100A AC/DC. These connectors are designed to complete a solar panel PV array, typically in parallel applications.

More information about BLW6A 2315


Similar products