Blue Sea Systems 7650 Add-A-Battery Kit

Blue Sea Systems 7650-BSS - Shares the charge between two batteries more efficiently than a battery isolator. The e-series dual circuit plus battery Switch simplifies the switching while the SI-ACR automates charging between two batteries. When installed, the add-a-Battery isolates the start battery from the house loads which prevents the discharge of the start battery.

Combines batteries for emergency starting. Blue sea systems popular add-A-Battery kit was primarily designed for boats with alternator output of 120A or less. Adding a second battery to the electrical system prevents the unintended discharge of the engine start battery. Isolates engine and house circuits. Simplifies switching.

Blue Sea Systems 7650 Add-A-Battery Kit - Includes e-series dual circuit plus battery switch PN 5511E. 12/24 volt dc 120 amp automatic charging relay PN 7610 automatically combines batteries during charging. Isolates batteries during engine cranking and when not charging. The add-a-battery offers a simple way to control the charging and battery switching of two battery banks.

Tin-plated copper studs for maximum conductivity and corrosion resistance.

More information about Blue Sea Systems 7650-BSS

Blue Sea Systems Common 150A 10-Gang BusBar with Cover

Blue Sea Systems 53614311 - Blue Sea Systems Common 150A 10-Gang BusBar with Cover - Max voltage: 300v aC/ 48V DC. Continuous rating: 130A AC/ 150A DC. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. 150a common busbar with 10 screws and a cover. The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

2 mounting holes accept #10 M5 screws.

More information about Blue Sea Systems 53614311


Similar products



Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

Blue Sea Systems 5026 - Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Accepts ato and ATC fast acting blade fuses. 3. 32"w x 6. 5"h x 1. 52"d. St blade fuse block - 12 circuits with negative bus and cover. 2 mounting holes accept #10 M5 screws. 150a common busbar with 10 screws and a cover. Positive distribution bus with #10-32 stud.

Continuous rating: 130A AC/ 150A DC. Can be used for 24-hour circuits. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Fuses sold separately. Max voltage: 300v aC/ 48V DC. Fuse block, atc/ato, mfg# 5026, 12 circuit, w/negative bus and cover, 32VDC max W/30Amp max per circuit & 100Amp per block.

More information about Blue Sea Systems 5026


Similar products



Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP

Acr Electronics 5191 - Insulating cap prevents accidental shorts. Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, amps max operating: 300a per block, terminal stud size: 5/16"-18 8mm, Mounting Hole Size: #10 5mm3/8". Compact, inverter, windlass, high-amp fuse-appropriate for DC Main, and bow thruster circuit protection.

Weatherproof - suitable for small open-cockpit boats and other harsh environments. Fuses sold separately. St blade fuse block - 12 circuits with negative bus and cover. Can be used for 24-hour circuits. Positive distribution bus with #10-32 stud. Continuous rating: 130A AC/ 150A DC. 2 mounting holes accept #10 M5 screws.

Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Accepts ato and ATC fast acting blade fuses. Max voltage: 300v aC/ 48V DC.

Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP - Terminal fuse blacknew isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse-Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space constraints Weatherproof-suitable for small open-cockpit boats and other harsh environments Insulating cap prevents accidental shorts Use 5/16" or 3/8" ring terminal 150a common busbar with 10 screws and a cover.

More information about Acr Electronics 5191


Similar products



SELTERM 10 Pack 4 Gauge 4 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

SELTERM - Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, terminal stud size: 5/16"-18 8mm, amps max operating: 300A per block, Mounting Hole Size: #10 5mm3/8". Compact, windlass, high-amp fuse-appropriate for DC Main, inverter, and bow thruster circuit protection. Weatherproof - suitable for small open-cockpit boats and other harsh environments.

Max voltage: 300v aC/ 48V DC. Ignition protected when used with MRBF fuses. Accepts ato and ATC fast acting blade fuses. Close end pad seals Out Moisture Keeping Cables Dry. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product. Positive distribution bus with #10-32 stud.

SELTERM 10 Pack 4 Gauge 4 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets - Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Ul tested & Approved. To ensure corrosion resistance the tin-plated lugs are salt spray tested to ASTM B 117. Can be Crimped or Soldered. Made from 100% annealed Tinned Copper for Max Current Flow. Fuses sold separately.

More information about SELTERM


Similar products



Blue Sea Systems 5183 100A Fuse Terminal

Acr Electronics 5183 - Positive distribution bus with #10-32 stud. Can be Crimped or Soldered. Can be used for 24-hour circuits. Close end pad seals Out Moisture Keeping Cables Dry. Made from 100% annealed Tinned Copper for Max Current Flow. Max voltage: 300v aC/ 48V DC. Continuous rating: 130A AC/ 150A DC. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks.

Fuses sold separately. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses. Ip66 - protected against powerful water jets. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity.

Blue Sea Systems 5183 100A Fuse Terminal - Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, amps max operating: 300a per block, terminal stud size: 5/16"-18 8mm, Mounting Hole Size: #10 5mm3/8". Compact, inverter, high-amp fuse-appropriate for DC Main, windlass, and bow thruster circuit protection. Weatherproof - suitable for small open-cockpit boats and other harsh environments.

Insulating cap prevents accidental shorts. Accepts ato and ATC fast acting blade fuses.

More information about Acr Electronics 5183


Similar products



Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG

Ancor 104010 - Exclusive insulation is rated at 600 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion. Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, amps max operating: 300a per block, terminal stud size: 5/16"-18 8mm, Mounting Hole Size: #10 5mm3/8". Compact, inverter, windlass, high-amp fuse-appropriate for DC Main, and bow thruster circuit protection.

Weatherproof - suitable for small open-cockpit boats and other harsh environments. Ignition protected-safe for installation aboard gasoline powered boats. 150a common busbar with 10 screws and a cover. Continuous rating: 130A AC/ 150A DC. Max voltage: 300v aC/ 48V DC. Positive distribution bus with #10-32 stud.

Ancor Marine Grade Primary Wire and Battery Cable Black, 100 Feet, 14 AWG - Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Accepts ato and ATC fast acting blade fuses. They are constructed with premium vinyl insulation that is rated at 600 volts, heat, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, 105 deg C dry and 75 deg C wet, oil, abrasion and ultra-violet radiation.

Insulating cap prevents accidental shorts. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. 2 mounting holes accept #10 M5 screws.

More information about Ancor 104010


Similar products



Blue Sea Systems WeatherDeck 12V DC Waterproof Circuit Breaker Panel - Gray, 6 Positions

Blue Sea Systems SS-1002 - Rated ip67 - temporary immersion for 30 minutes Independent label backlighting circuit for remote switching and dimming Available in 2, 4, 6 and 8 circuit models. Continuous rating: 130A AC/ 150A DC. 150a common busbar with 10 screws and a cover. Rated ip67-temporary immersion for 30 minutes. Corrosion free Ideal for Marine Automotive or Outdoor Use.

Blue Sea Systems WeatherDeck 12V DC Waterproof Circuit Breaker Panel - Gray, 6 Positions - Compatible with all Blue Sea Systems Digital Dimmers. 2 mounting holes accept #10 M5 screws. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks.

Ignition protected-safe for installation aboard gasoline powered boats. Max voltage: 300v aC/ 48V DC. St blade fuse block - 12 circuits with negative bus and cover. Insulating cap prevents accidental shorts. Positive distribution bus with #10-32 stud. Ul tested & Approved. Can be Crimped or Soldered.

More information about Blue Sea Systems SS-1002


Similar products



Blue Sea Systems 187 Series, 285 Series & Klixon Circuit Breakers, 285 Series, Surface Mount, 100A DC

Blue Sea Systems 7187-BSS - They are constructed with premium vinyl insulation that is rated at 600 volts, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, oil, 105 deg C dry and 75 deg C wet, battery acid, gasoline, abrasion and ultra-violet radiation.12/24v, 6 position grey Waterproof Circuit Breaker Panel.

Drop in replacement for 185-series circuit Breakers Visible reset lever shows open condition "Trip Free" design cannot be held "ON" during fault current condition. Made from 100% annealed Tinned Copper for Max Current Flow. Visible reset lever shows open condition. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks.

Blue Sea Systems 187 Series, 285 Series & Klixon Circuit Breakers, 285 Series, Surface Mount, 100A DC - Positive distribution bus with #10-32 stud. Pack of 1, 100a terminal fuse, Max voltage: 58V DC. Can be used for 24-hour circuits. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Compatible with all Blue Sea Systems Digital Dimmers. Fuses sold separately. Max voltage: 300v aC/ 48V DC.

More information about Blue Sea Systems 7187-BSS


Similar products



Blue Sea Systems Dual USB Charger Socket

Blue Sea Systems 1016-BSS - Can be Crimped or Soldered. Visible reset lever shows open condition. St blade fuse block - 12 circuits with negative bus and cover. Terminal size: 1/4" Ring Terminal. Ul tested & Approved. Rated ip67-temporary immersion for 30 minutes. Designed for flybridge and open cockpit applications. Max output charge 2. 1a dc total, input voltage range: 9V-32V DC, output voltage: 5V DC+/- 5%.

Can be used for 24-hour circuits. Close end pad seals Out Moisture Keeping Cables Dry. Accepts ato and ATC fast acting blade fuses. Ignition protected-safe for installation aboard gasoline powered boats. Insulating cap prevents accidental shorts. They are constructed with premium vinyl insulation that is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, heat, oil, gasoline, battery acid, 105 deg C dry and 75 deg C wet, abrasion and ultra-violet radiation.

Blue Sea Systems Dual USB Charger Socket - 12/24v, 6 position grey Waterproof Circuit Breaker Panel. Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, terminal stud size: 5/16"-18 8mm, amps max operating: 300A per block, Mounting Hole Size: #10 5mm3/8". Compact, windlass, inverter, high-amp fuse-appropriate for DC Main, and bow thruster circuit protection.

Weatherproof - suitable for small open-cockpit boats and other harsh environments.

More information about Blue Sea Systems 1016-BSS


Similar products



NOCO BT31S Group 24-31 HD Battery Tray for Automotive, Marine and RV Batteries

NOCO BT31S - Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal. Can be used for 24-hour circuits. Max voltage: 300v aC/ 48V DC. Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure.

Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Trip free design cannot be held "ON" during fault current condition. Ignition protected when used with MRBF fuses.

NOCO BT31S Group 24-31 HD Battery Tray for Automotive, Marine and RV Batteries - Designed for flybridge and open cockpit applications. Visible reset lever shows open condition. Black 12/24v dual usb 2. 1a socket mount charger allows you to charge two mobile devices on the go. Protective dust cap keeps debris and moisture out. Internal fusing. All noco extreme-duty battery trays meet United States Coast Guard USCG Code of Federal Regulations 183.

420 and american boat and Yacht Council ABYC E-10

More information about NOCO BT31S


Similar products