Giandel 4000W Heavy Duty Pure Sine Wave Power Inverter DC12V to AC120V with 4 AC Outlets with Remote Control 2.4A USB and LED Display

GIANDEL PS-4000QAR - About giandel a top inverter brand in Australia, professional devoted to providing quality products with a better price for consumers. Specifications: power 4 ac outlets: 4000w rated, 8000W peak USB output: 1xDC 5V/2. 4amax output wave: pure sine wave THD. A must-have for your road trips, vacations, outdoors, emergency kits and more.

More information about GIANDEL PS-4000QAR

On-Off - BEP 701 Battery Switches

Marinco 701 - Ignition protected. This ensures that the switch meets ABYC requirements. Operation: on/off, 455a dc intermittent 5 min, 1250a dc cranking 10 sec, Rating: 275A DC Continuous 1hr, voltage: 48v dc, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

This ensures the switch meets ABYC requirements. The control knob can be removed by switching to an counterclockwise 45 degree position. Three removable side plates provide access of up to 1/0 cables. This control knob also features an interchangeable labeling system allowing a full range of applications Item # 713 or 715.

This switch offers a number of unique features, allowing it to be a stand alone unit, the highlight being the patented Contour Locking System, or locked together with other switches. The rear cover insulating the rear terminals against any short circuits. Bep marine battery switch test procedures UL 1107 Continuous 1 hour, intermittent 5 minutes and Cranking engine starting - 10 seconds.

On-Off - BEP 701 Battery Switches - Tin-plated copper studs and nuts. Control knob can be removed by switching to counter-clockwise 45° position. The continuous and intermittent ratings are tested at 110% of specified ratings. The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C 212 deg F above the ambient temperature.

More information about Marinco 701


Similar products



Go Power! TS-30 30 Amp Automatic Transfer Switch

Go Power! TS-30 - This ensures the switch meets ABYC requirements. Go power! 30 amp transfer switch is used to hardwire inverters into a system where there is an alternative source of AC. Delay switch for use with generators. Control knob can be removed by switching to counter-clockwise 45° position. Ignition protected. Tin-plated copper studs and nuts.

Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This transfer switch is made to only allow one source of AC power to pass through it to the loads and can handle 30 Amps of service. Can handle 2 sources of 30 amps at one time.

Go Power! TS-30 30 Amp Automatic Transfer Switch - Made for use with inverter, shore power or generators. Single relay. Operation: on/off, voltage: 48v dc, 455a dc intermittent 5 min, rating: 275A DC Continuous 1hr, 1250a dc cranking 10 sec, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

Comes with knockouts for easy and professional installation. This ensures that the inverter will not be damaged if the generator or utility power is hooked up while the inverter is running as well as well as contains all instructions.

More information about Go Power! TS-30


Similar products



Hilitchi MC3 MC4 Solar Crimper for 2.5/4.0/6.0mm² Solar Panel PV Cable, 10pcs MC4 Male Female Solar Panel Cable Connectors, 1 Pair of Solar MC4 Connector Spanner

Hilitchi - Free replacement or refund within 90days. 12 hours quick response. Comes with knockouts for easy and professional installation. We would work out satisfactory solution to all your problems. Hilitchi mc3 mc4 Solar Crimper for 2. 5/4. 0/6. 0mm² solar panel pv cable, 1 pair of solar mc4 connector spanner operation: on/off, 455a dc intermittent 5 min, voltage: 48v dc, 10pcs MC4 Male Female Solar Panel Cable Connectors, 1250a dc cranking 10 sec, Rating: 275A DC Continuous 1hr, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Delay switch for use with generators. Tin-plated copper studs and nuts. This ensures the switch meets ABYC requirements. The internal rubber belt can secure the tools and reduce collision. X1f534;【good craftsmanship】crimper is ratchet mechanism, power saving.

Hilitchi MC3 MC4 Solar Crimper for 2.5/4.0/6.0mm² Solar Panel PV Cable, 10pcs MC4 Male Female Solar Panel Cable Connectors, 1 Pair of Solar MC4 Connector Spanner - Double color pP+TPR plastic handle with ergonomic design. Mc4 multi-purpose wrench with frosted plastic surface, easy to open and close, with a waterproof and weather proof ring and with stable self-locking mechanism, no slippage occurred. X1f534;【quality after-sale service】if you do not satisfy with our products or if you have any questions, please come to us.

More information about Hilitchi


Similar products



SELTERM 5 Pack 4/0 Gauge 4/0 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

SELTERM - The internal rubber belt can secure the tools and reduce collision. X1f534;【good craftsmanship】crimper is ratchet mechanism, power saving. Double color pP+TPR plastic handle with ergonomic design. X1f534;【high strength and hardness】for the mc4 crimper, it is of high carbon steel and high strength alloy steel die for long service life.

Handle is made of pp+tPR material, it offers comfortable hand feel and is anti-skid. X1f534;【package contents】you will get one mc3 mc4 solar crimper, 10 pcs mc4 male female solar panel cable connectors, 1 Pair of Solar MC4 Connector Spanner. Zipper storage bag is a plus. Can be Crimped or Soldered. Free replacement or refund within 90days.

SELTERM 5 Pack 4/0 Gauge 4/0 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard. Delay switch for use with generators. Mc4 multi-purpose wrench with frosted plastic surface, easy to open and close, with a waterproof and weather proof ring and with stable self-locking mechanism, no slippage occurred.

X1f534;【quality after-sale service】if you do not satisfy with our products or if you have any questions, please come to us. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product.

More information about SELTERM


Similar products



Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft

Young4us 43237-2 - Main color: black & red. Rated voltage: 600V. External hanging belt is convenient to carry. The internal rubber belt can secure the tools and reduce collision. X1f534;【good craftsmanship】crimper is ratchet mechanism, power saving. Double color pP+TPR plastic handle with ergonomic design. Control knob can be removed by switching to counter-clockwise 45° position.

Package content: 1 x heat shrink tubingblack 1. 22m4ft 1 x heat shrink tubingred1. 22m4ft operation: on/off, 1250a dc cranking 10 sec, 455a dc intermittent 5 min, voltage: 48v dc, Rating: 275A DC Continuous 1hr, Stud Size: 2x3/8" 10mm. Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft - These tubes are suitable for bundling, electrical insulation, mechanical protection and wire joints etc. Product advantages: durable structure with fast heat-shrinkage, high heat-shrinkable ratio, strong heat-shrinkable stress. Material: polyolefin. Close end pad seals Out Moisture Keeping Cables Dry. Heavy duty construction for Enhanced High Temperature Durability.

We would work out satisfactory solution to all your problems. Can handle 2 sources of 30 amps at one time.

More information about Young4us 43237-2


Similar products



Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors

TOOL-MC4 TOOL-MC4 - We would work out satisfactory solution to all your problems. Free replacement or refund within 90days. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Can be Crimped or Soldered. Hard plastic. Comes with knockouts for easy and professional installation. For breaking connections after they have already been locked together.

Made for use with inverter, shore power or generators. Heavy duty construction for Enhanced High Temperature Durability. Tin-plated copper studs and nuts. Mc4 multi-purpose wrench with frosted plastic surface, easy to open and close, with a waterproof and weather proof ring and with stable self-locking mechanism, no slippage occurred.

Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors - X1f534;【quality after-sale service】if you do not satisfy with our products or if you have any questions, please come to us. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. Rated voltage: 600V. Secure compressing, to ensure that successful compression in one time, no wasting of the MC4 core. X1f534;【connectors & spanner】for the male and female solar panel cable connectors, all are made for good application, saving time and trouble.

X1f534;【high strength and hardness】for the mc4 crimper, it is of high carbon steel and high strength alloy steel die for long service life.

More information about TOOL-MC4 TOOL-MC4


Similar products



Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat

Link Solar #201809213LS - Rated voltage: 600V. Delay switch for use with generators. Very handy for the assembly of custom Mc4 wires. This ensures the switch meets ABYC requirements. Link solar abs solar cable entry gland is used for the passing of cables into the Motorhome, from the Solar panel, or for use on yachts /boats for cable entry from the mast.

Comes with knockouts for easy and professional installation. Free replacement or refund within 90days. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Hard plastic. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. Secure compressing, to ensure that successful compression in one time, no wasting of the MC4 core.

Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat - X1f534;【connectors & spanner】for the male and female solar panel cable connectors, all are made for good application, saving time and trouble. Close end pad seals Out Moisture Keeping Cables Dry. For breaking connections after they have already been locked together. Main color: black & red. Ul tested & Approved.

More information about Link Solar #201809213LS


Similar products



ANJOSHI Circuit Breaker 50amp 50A-300A with Manual Reset Home Solar System Fuse Holder for Car Audio and Amps Protection 12V-24V DC Reset Fuse Inverter Replace Fuses

ANJOSHI - Mount on panel or firewall Unique Push Button Reset can also be used as a Kill Switch. Hard plastic. Please order and use the Circuit Breaker with right work temperature, to avoid it is too heat and stop work. Any quality issue, simple contact us by eMAIL To Get Full Money Back, only order from ANJOSHI store.

Stops power surges from damaging Your Amps, Protects Your Trolling Motor From Electrical Damage. Specification: 1. 100% compatible with Renogy MC4 connectors. Main color: black & red. Package include: 1x 50a circuit Breaker Car Audio Inline Fuse Please Note: 1. Ul tested & Approved. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C.

ANJOSHI Circuit Breaker 50amp 50A-300A with Manual Reset Home Solar System Fuse Holder for Car Audio and Amps Protection 12V-24V DC Reset Fuse Inverter Replace Fuses - 2. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Work temperature: -10c to 50C -14F to 122F. Secure compressing, to ensure that successful compression in one time, no wasting of the MC4 core. X1f534;【connectors & spanner】for the male and female solar panel cable connectors, all are made for good application, saving time and trouble.

This ensures the switch meets ABYC requirements.

More information about ANJOSHI


Similar products



Renogy 20Ft 10 AWG Solar Panel and Controller Connector Adaptor Wire MC4 Extension Cables

Renogy AK-20FT-10 - Two cables with hard plastic MC4 connecters at one end and bare on the other end male and female. Black wire sunlight resistant cable, extends and locks built-in cables. Uv resistant and waterproof, TUV tested cable. Tuv logo print per feet indicates that the cable meets TUV standards for PV solar application.

Make more space between your solar panels and between your solar panel and charge controller. X1f534;【high strength and hardness】for the mc4 crimper, it is of high carbon steel and high strength alloy steel die for long service life. Handle is made of pp+tPR material, it offers comfortable hand feel and is anti-skid.

Renogy 20Ft 10 AWG Solar Panel and Controller Connector Adaptor Wire MC4 Extension Cables - X1f534;【package contents】you will get one mc3 mc4 solar crimper, 10 pcs mc4 male female solar panel cable connectors, 1 Pair of Solar MC4 Connector Spanner. Zipper storage bag is a plus. 100% compatible with Renogy MC4 connectors. This ensures the switch meets ABYC requirements. Close end pad seals Out Moisture Keeping Cables Dry.

Ul tested & Approved. External hanging belt is convenient to carry.

More information about Renogy AK-20FT-10


Similar products



Mighty Max Battery 12V 100AH Battery for Solar Wind DEEP Cycle VRLA 12V 24V 48V Brand Product

Mighty Max Battery - Very handy for the assembly of custom Mc4 wires. Material: polyolefin. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Main color: black & red. Can be Crimped or Soldered. Delay switch for use with generators. Advanced design works right out of the box and requires zero maintenance, zero adding of fluids compared to a flooded wet cell battery.

Delivering power when you need it, heavy-duty, the mighty max ML100-12 12 Volt 100 AH uses a state of the art, calcium-alloy grid that provides exceptional performance and service life in both float and cyclic applications. The ml100-12 is an absorbent glass mat agm technology with a valve regulated design, that can be used in enclosed and indoor environments without leaking or maintenance, providing a superior performance for thousands of models.

Mighty Max Battery 12V 100AH Battery for Solar Wind DEEP Cycle VRLA 12V 24V 48V Brand Product - Mighty max sla batteries are utilized in a wide variety of applications including; consumer Electronics, Toys and Hobby, Power sports, Access Control Devices, Electric Vehicles, Emergency Lighting, Engine Starters, Medical Mobility, Lawn and Garden Tools, Solar, Portable Tools, Golf Carts, Hunting, Motorcycles, Security and more.

Specifications:voltage: 12 voltamperage: 100 AHChemistry: SLA, AGMBattery Dimensions:12. 17 in x 6. 61 in x 8. 30 inweight: 63. 93 lbswarranty1 yeargenuine mighty max battery product operation: on/off, 1250a dc cranking 10 sec, Rating: 275A DC Continuous 1hr, voltage: 48v dc, 455a dc intermittent 5 min, Stud Size: 2x3/8" 10mm.

More information about Mighty Max Battery


Similar products