Go Power! GP-IC2000-12-PKG Pure Sine Wave Inverter 2000 Watt with 100 amp Charger Includes ICR-50 Remote

Go Power! GP-IC2000-12-PKG - Using the gp-ic2000-12 there is only one component to install and an easy to use remote. 3 year warranty. The gp-ic2000 has a 3-year warranty. This package also includes a battery temperature sensor and the ICR-50 digital Inverter remote. The pure sine wave output is great for running computers, portable electronics, microwaves, fridges, TV's medical equipment etc.

. A typical rv, marine or off grid system usually requires a separate inverter, a separate charger, and a transfer switch to operate. The go power! ic2000-12-pkg is a 12 vdc 2000 watt pure sine wave inverter with built in charger 100 amp and built in transfer switch Dual 50 amp. 2000 watt pure sine wave inverter with built in 100 amp charger and dual 50 amp transfer switch, plus digital display remote and temperature sensor.

Go Power! GP-IC2000-12-PKG Pure Sine Wave Inverter 2000 Watt with 100 amp Charger Includes ICR-50 Remote - Ul458 and ul1741 certified. The gp-ic-2000 has a power share feature. This remote controls the many features built into this inverter charger. The easiest installation on the market, and our first inverter charger with dual 50 amp pass through. This would be enough power to start the AC. Once the ac is running, the draw is much lower and the generator can run the AC by itself.

This feature allows you to combine 2000 watts from the inverter to the power from your generator to start large loads.

More information about Go Power! GP-IC2000-12-PKG

Blue Sea Systems m-Series Mini On-Off Battery Switch with Knob- Red

Acr Electronics 6006 - Positions: single-circuit On-Off. Ignition protected-safe for installation aboard gasoline powered boats. Single circuit on-off. 2. 83"w x 2. 83"h x 3. 1"d. Continuous rating: 300A, Maximum Voltage: 48V DC. Make before break contact design allows switching between battery banks without power interruption. With removable knob.

Mini battery switch, red, Mfg# 6006, 300A control.500a int. 48vdc. Ip66 waterproof, iso 8846 and meets ABYC requirements. Switches a single battery to a single load group.

More information about Acr Electronics 6006


Similar products



Blue Sea Systems e-Series On/Off Battery Switch

Acr Electronics 915 - Continuous rating: 300A, Maximum Voltage: 48V DC. E series battery switch, red, Mfg# 9003E, 350A control.600a int. 48vdc. Positions: single-circuit On-Off. 3. 85"h x 3. 85"w x 3. 1"d. Ip66 waterproof, iso 8846 and meets ABYC requirements. Ignition protected-safe for installation aboard gasoline powered boats. Ip66 waterproof, iso 8846 and meets ABYC requirements.

Switches a single battery to a single load group. Single circuit on-off. Make before break contact design allows switching between battery banks without power interruption. Switches a single battery to a single load group. Terminal stud size: 3/8" - 16. Ignition protected-safe for installation aboard gasoline powered boats.

Blue Sea Systems e-Series On/Off Battery Switch - Continuous rating: 350A, Maximum voltage: 48V DC. Single circuit on-off.

More information about Acr Electronics 915


Similar products



Victron BMV-712 Battery Monitor

Victron Energy MONITOR-VTBMV-S - Single circuit on-off. Continuous rating: 350A, Maximum voltage: 48V DC. Terminal stud size: 3/8" - 16. Ip66 waterproof, iso 8846 and meets ABYC requirements. Complex software algorithms are needed to take all these variables into account. Battery "fuel-gauge", and much more - the remaining battery capacity depends on the ampere-hours consumed, discharge current, time-to-go indicator, temperature and the age of the battery.

Switches a single battery to a single load group. Single circuit on-off. The bmv-712 features an additional input which can be programmed to measure the voltage of a second battery, battery temperature or midpoint voltage. Ignition protected-safe for installation aboard gasoline powered boats. Built-in bluetooth communication - Monitor your batteries on Apple or Android smartphones, tablets, macbooks, and other devices.

Victron BMV-712 Battery Monitor - Easy to install - the shunt interrupts the negative coming off the battery bank connects to the monitor with a standard RJ12 telephone cable. Easy to program - a quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.

Next to the basic display options, and ampere-hours consumed, time to go, the BMV-700 series also displays state of charge, current, such as voltage, and power consumption in Watts. Ignition protected-safe for installation aboard gasoline powered boats.

More information about Victron Energy MONITOR-VTBMV-S


Similar products



Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft

Young4us 43237-2 - Terminal stud size: 3/8" - 16. The young4us durable heat shrink tubes are made from polyolefin, which resist to harsh environment and have a high heat-shrinkable ratio of 3:1, the internal layer is coated by hot-melt adhesive, which has satisfied bonding performance. Ignition protected-safe for installation aboard gasoline powered boats.

Switches a single battery to a single load group. Package content: 1 x heat shrink tubingblack 1. 22m4ft 1 x heat shrink tubingred1. 22m4ft single circuit on-off. Our tubes are with standard of RoHS and you can use heat gun, alcohol lamp, lighter or air drier to heat them. Continuous rating: 350A, Maximum voltage: 48V DC.

Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft - Product advantages: durable structure with fast heat-shrinkage, high heat-shrinkable ratio, strong heat-shrinkable stress. The tubes have the advantages of good insulativity, metal pipeline and electrical wire and cable, water proofing, which can be widely used in wiring, corrosion prevention and insulation protection for electronic component, excellent corrosion resistance and abrasion performance, seal, etc.

Make before break contact design allows switching between battery banks without power interruption. Main color: black & red. Ip66 waterproof, iso 8846 and meets ABYC requirements. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C.

More information about Young4us 43237-2


Similar products



SELTERM 15 Pack 2/0 Gauge 2/0 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

SELTERM - Ignition protected-safe for installation aboard gasoline powered boats. Single circuit on-off. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. Main color: black & red. Ip66 waterproof, iso 8846 and meets ABYC requirements.

Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Ip66 waterproof, iso 8846 and meets ABYC requirements. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard.

SELTERM 15 Pack 2/0 Gauge 2/0 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug - Heavy duty construction for Enhanced High Temperature Durability. Terminal stud size: 3/8" - 16. Can be Crimped or Soldered. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed. Ul tested & Approved.

More information about SELTERM


Similar products



SELTERM 15 Pack 2/0 Gauge 2/0 AWG 5/16" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

SELTERM - Single circuit on-off. Selterm marine grade copper Lugs are manufactured using industry leading processes to guarantee a high-quality product. Ul tested & Approved. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Built-in bluetooth communication - Monitor your batteries on Apple or Android smartphones, macbooks, tablets, and other devices.

Easy to install - the shunt interrupts the negative coming off the battery bank connects to the monitor with a standard RJ12 telephone cable. Easy to program - a quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.

SELTERM 15 Pack 2/0 Gauge 2/0 AWG 5/16" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets - Next to the basic display options, time to go, the BMV-700 series also displays state of charge, such as voltage, and ampere-hours consumed, current, and power consumption in Watts. Material: polyolefin. Rated voltage: 600V. Heavy duty construction for Enhanced High Temperature Durability. Main color: black & red.

Ul tested & Approved. Switches a single battery to a single load group.

More information about SELTERM


Similar products



2/0 Gauge 2/0 AWG 10 Feet Red + 10 Feet Black Welding Battery Pure Copper Flexible Cable + 10pcs of 3/8" Tinned Copper Cable Lug Terminal Connectors + 3 Feet Black Heat Shrink Tubing

WindyNation - Heavy duty construction for Enhanced High Temperature Durability. Corrosion free Ideal for Marine Automotive or Outdoor Use. Can be Crimped or Soldered. This product listing is ideal for customers that are using the cable on installations that require cable lugs and heat shrink tubing. Cable lug specifications: pure copper, excellent conductivity characteristics, wire can be crimped or soldered, tinned for corrosion protection excellent for outdoor and marine applications, closed end design to protect cable from outdoor environment, flared barrel end for easy entry of cable.

Heat shrink tubing: 600 volts maximum, resistant to most solvents and fire resistant polyolefin material, temperature range -55 Celsius to +125 Celsius, black in color with no printing. Make before break contact design allows switching between battery banks without power interruption. Switches a single battery to a single load group.

2/0 Gauge 2/0 AWG 10 Feet Red + 10 Feet Black Welding Battery Pure Copper Flexible Cable + 10pcs of 3/8" Tinned Copper Cable Lug Terminal Connectors + 3 Feet Black Heat Shrink Tubing - Save time and money by purchasing all components in one product listing. Windynation power flex cable is fully annealed pure copper, with a tough, highly flexible high copper strand count, stranding, insulation and copper thickness, voltage, solvent resistant EPDM insulation jacket. Main color: black & red.

Made from 100% annealed Tinned Copper for Max Current Flow. See photo gallery for technical specifications.

More information about WindyNation


Similar products



Victron BMV-712 Battery Monitor with Battery Temperature Sensor

Victron - Displays the cumulative amp-hours used from the battery. Cable lug specifications: pure copper, tinned for corrosion protection excellent for outdoor and marine applications, closed end design to protect cable from outdoor environment, excellent conductivity characteristics, wire can be crimped or soldered, flared barrel end for easy entry of cable.

Heat shrink tubing: 600 volts maximum, temperature range -55 Celsius to +125 Celsius, resistant to most solvents and fire resistant polyolefin material, black in color with no printing. Ul tested & Approved. Switches a single battery to a single load group. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

Victron BMV-712 Battery Monitor with Battery Temperature Sensor - Single circuit on-off. Continuous rating: 350A, Maximum voltage: 48V DC. Can be Crimped or Soldered. Use a smartphone or other bluetooth enabled device to: customize settings monitor all important data on single screen view historical data update the software when new features become available Easy to installBi-stable alarm relay prevents increased current draw in case of an alarm Other features Battery voltage, power, ampere-hours consumed and state of charge Remaining time at the current rate of discharge Programmable visual and audible alarm Programmable relay, current, to turn off non critical loads or to run a generator when needed 500 Amp quick connect shunt and connection kit Shunt selection capability up to 10.

000 amps VE. Direct communication port - stores a wide range of historical events, which can be used to evaluate usage patterns and battery health Wide input voltage range: 9. 5 - 95v high current measurement resolution: 10 mA 0

More information about Victron


Similar products



TEMCo Hammer Lug Crimper Tool 5 Year Warranty

Temco TH0007 - Also works well in a shop vise. Crimping type: Indent. Manual hammer crimper recommend 2 to 4 lb sledgehammer. How to use crimper: STEP 1 Place terminal in jaw of crimper. Built-in bluetooth to track the state of your battery via smart phone. Refer to the photo gallery for a detailed specification chart amperage, etc.

Copper cable is fully annealed per ASTM standards. Includes 2/0 awg pure copper cable + 10pcs 2/0 awg copper cable Lugs + 3 Feet Black Heat Shrink Tubing. Switches a single battery to a single load group. Can be Crimped or Soldered. Continuous rating: 300A, Maximum Voltage: 48V DC. Ip66 waterproof, iso 8846 and meets ABYC requirements.

Built-in bluetooth communication - Monitor your batteries on Apple or Android smartphones, tablets, macbooks, and other devices. Easy to install - the shunt interrupts the negative coming off the battery bank connects to the monitor with a standard RJ12 telephone cable. Easy to program - a quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings.

TEMCo Hammer Lug Crimper Tool 5 Year Warranty - Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting. Next to the basic display options, and ampere-hours consumed, current, the BMV-700 series also displays state of charge, such as voltage, time to go, and power consumption in Watts.

Material: polyolefin.

More information about Temco TH0007


Similar products



Valterra Twist-On Waste Valve, Mess-Free Waste Valve for RV's, Campers, Trailers

Valterra T58 - Make before break contact design allows switching between battery banks without power interruption. Easy to use: simply attach the twist-on valve to the broken valve and open the handle of the broken valve for a quick fix. Fix your rv the easy way with the Valterra Twist-On Waste Valve! Eliminate the mess with your old RV plumbing valve.

Heavy duty construction for Enhanced High Temperature Durability. So easy to use, camper, the valterra Twist-On Waste Valve is perfect for any RV, or trailer owner. Ignition protected-safe for installation aboard gasoline powered boats. 5 year Limited Warranty. Versatile: fits most standard RV's and campers for a universal match.

Valterra Twist-On Waste Valve, Mess-Free Waste Valve for RV's, Campers, Trailers - Refer to photo gallery for a detailed specification chart. This bundle includes a brand new in box bmv-712 Battery Monitor & Victron Temperature Sensor ASS000100000 Includes 2/0 awg pure copper cable + 10pcs 2/0 awg copper cable Lugs + 3 Feet Black Heat Shrink Tubing. Close end pad seals Out Moisture Keeping Cables Dry.

Ul tested & Approved. Ip66 waterproof, iso 8846 and meets ABYC requirements. Simply attach to the front of the broken valve, open the handle or paddle of the broken valve, and you're good to go! With a bayonet attachment system, you can be sure that the valve stays on tight.

More information about Valterra T58


Similar products