Kinverch 2000W Pure Sine Wave Power Inverter Converts 12V DC to 110V AC with USB Port

#ad
Kinverch PA2000 #ad - Specifications: Nominal input voltage:12. 8~13. 2 vdc nominal output voltage:110-125v ac Continuous output power:Up to 2000W Surge output power 01 second:4000w input overvoltage shutdown:16±05vdc input under voltage alarm: 105±05vdc input low voltage shutdown: 10±05vdc output wave: Pure sine wave. To reduce risk of electric shock, unplug unit from outlet before attempting any maintenance or cleaning.

Outlets: 3 AC outlets. What you get: 1x kinverch 2000w pure sine wave Power Inverter, 4xCar Battery Cables, 1xUser Manual and our friendly customer service. The inverter draws low amperage from the battery with the main ON/OFF switch turned on and no load connected. Usb port:dc 5v/2a Size:109*9. 6*3. 6 inches tips: connect the inverter to a battery, and plug your AC devices into the inverter.

Kinverch 2000W Pure Sine Wave Power Inverter Converts 12V DC to 110V AC with USB Port #ad - Microwave, you can power most of appliances including sensitive loads like fridge, oven and medical machine with no issues. Equipped with 8 internal fuses and 2 cooling fans to provide fully safety protections inclduing overheating, under and over voltage charging, short circuiting, overloads, and overcharging.

With intelligent cooling fans only start running when the heatsink temperature reaches 104° F and easier to dissipate heat, which not only ensures you a ultra silent using experience but also keeps the inverter running safely and effectively at a low temperature.

More information about Kinverch PA2000 #ad

Camco Heavy Duty Double Battery Box with Straps and Hardware - 55374 - Group GC2 | Safely Stores RV, Automotive, and Marine Batteries |Durable Anti-Corrosion Material | Measures 21.5" x 7.4" x 11.2"

#ad
Camco 55374 #ad - Includes: 2 straps and 4 strap clamps with screws. Meets u. Includes 2 straps and 4 strap clamps with screws. Coast guard specifications: meets u. Box holds: 2 6v group gc2 batteries or 2 12V Group 24/24M batteries. 5-inches L x 7. Safe and durable construction: Made of heavy-duty, corrosion-resistant polypropylene to keep batteries safe.

5-inches l x 7. 2-inches H. Made of heavy-duty, corrosion-resistant polypropylene, it holds 2 6V Group GC2 batteries or 2 12V Group 24/24M batteries. Camco's double battery Box safely stores automotive, RV and marine batteries. 420 and abyc e-10 S. The box's inner dimensions measure 21. 420 and abyc e-102-inches H.

Camco Heavy Duty Double Battery Box with Straps and Hardware - 55374 - Group GC2 | Safely Stores RV, Automotive, and Marine Batteries |Durable Anti-Corrosion Material | Measures 21.5" x 7.4" x 11.2" #ad - Coast guard cfr 183. The double Battery Box meets U. S. 7 specifications when used with 2 6V Group GC2 batteries. 4-inches W x 11.

More information about Camco 55374 #ad


Similar products



Battery Switch, 6V 12V 24V 48V Battery Disconnect Master Cutoff Switch for Marine Boat RV ATV UTV Vehicles, Waterproof Heavy Duty Battery Isolator Switch On/Off

#ad
LotFancy #ad - Specification: operation: on/off rating: 275a dc continuous 1hr, camper, 1250a dc cranking 10 sec, 455a dc intermittent 5 min, rv, voltage: 6V-48V DC Stud Size: 2x3/8" 10mm Widely Applcations: Widely used for Car, ATV, Boat, UTV, Marine, Truck, Travel Trailer, Battery banks and other 0-60V Devices. Tin-plated copper studs and nuts; Ignition-protected.

The patented contour Locking System, can stand alone or be locked together with other switch. Coast guard cfr 183. Easy to install well built heavy duty Cut Off Switch: ABS plastic housing, the rear cover insulating the rear terminals against any short circuits. The rear cover insulating the rear terminals against any short circuits, ensuring that the switch meets ABYC requirements.

Battery Switch, 6V 12V 24V 48V Battery Disconnect Master Cutoff Switch for Marine Boat RV ATV UTV Vehicles, Waterproof Heavy Duty Battery Isolator Switch On/Off #ad - 5-inches l x 7. Super safety: battery disconnect switch can disconnect the battery safely to eliminate any power draw from the battery when vehicle or boat is not in use Package Includes: 1 * Battery Switch 4 * Side Pads 4 * Mounting Bolts 1 * Rear Cover Box holds: 2 6v group gc2 batteries or 2 12V Group 24/24M batteries.

Operation: on/off 2 position; voltage: 6v-48v dc; rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, 1250A DC Cranking 10 sec; Stud Size: 2x3/8" 10mm; Switch on = Power; Switch off = No power. 2-inches H. S. Coast guard specifications: meets u.

More information about LotFancy #ad


Similar products



Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat

#ad
Link Solar #201809213LS #ad - This battery cut off kill switch has four removable side plates provide access of up to 1/0 cables. Suitable for most round cables for Solar Panel, DC power, Aerial, satellite, Air conditioning, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, dicor sealant, 291, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc.

The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. 2-inches H. Safe and durable construction: Made of heavy-duty, corrosion-resistant polypropylene to keep batteries safe. 420 and abyc e-10 Coast guard cfr 183. It can also be used for other installations and structures such as buildings, garages, sheds and other roofs Manufactured by Link Solar Box holds: 2 6v group gc2 batteries or 2 12V Group 24/24M batteries.

Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat #ad - The patented contour Locking System, can stand alone or be locked together with other switch. The rear cover insulating the rear terminals against any short circuits, ensuring that the switch meets ABYC requirements. 4-inches W x 11. Link solar abs solar cable entry gland is used for the passing of cables into the Motorhome, from the Solar panel, or for use on yachts /boats for cable entry from the mast.

Tin-plated copper studs and nuts; Ignition-protected.

More information about Link Solar #201809213LS #ad


Similar products



Universal Power Group 12V 100Ah Solar Wind AGM SLA DEEP Cycle VRLA Battery 12V 24V 48V

#ad
UPG #ad - Inner dimensions: 21. Coast guard cfr 183. The rear cover insulating the rear terminals against any short circuits, ensuring that the switch meets ABYC requirements. 2-inches H. This contour battery master switch is widely used for car, travel Trailer, UTV, Truck, marine, atv, Boat, RV, Camper, Battery banks and other 0-48V Devices; 1 Year Warranty--a replacement or refund is guaranteed.

Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. Rechargeable battery that can be mounted in any position, resists shocks and vibration. This battery cut off kill switch has four removable side plates provide access of up to 1/0 cables.

Universal Power Group 12V 100Ah Solar Wind AGM SLA DEEP Cycle VRLA Battery 12V 24V 48V #ad - 4-inches W x 11. Coast guard specifications: meets u. Operation: on/off 2 position; voltage: 6v-48v dc; rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, 1250A DC Cranking 10 sec; Stud Size: 2x3/8" 10mm; Switch on = Power; Switch off = No power. The patented contour Locking System, can stand alone or be locked together with other switch.

1 year Warranty. Weight: 63. 93 lbs. S.

More information about UPG #ad


Similar products



Baomain ANL-200A Electrical Protection ANL Fuse 200 Amp with Fuse Holder 1 Pack

#ad
Baomain HD-ANL-200A #ad - Coast guard specifications: meets u. Coast guard cfr 183. 420 and abyc e-10 Meets u. Dimensions: 12. 17 inches x 6. 61 inches x 9. 16 inches. Gold tone plated metal sheet construction, durable finish and conductivityWorking for inverters and car audio and other high current applicationsEasy Installation for Multiuse Combinations in the Fuse Holder Box holds: 2 6v group gc2 batteries or 2 12V Group 24/24M batteries.

This contour battery master switch is widely used for car, boat, uTV, atv, Truck, RV, Travel Trailer, Camper, marine, Battery banks and other 0-48V Devices; 1 Year Warranty--a replacement or refund is guaranteed. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables.

Baomain ANL-200A Electrical Protection ANL Fuse 200 Amp with Fuse Holder 1 Pack #ad - Includes: 2 straps and 4 strap clamps with screws. Sla/agm maintenance free, spill proof battery. 7 specifications when used with 2 6V Group GC2 batteries. 2-inches H. S. Inline anl holder is suitable for 0 2 4 Gauge Square. S. Rechargeable battery that can be mounted in any position, resists shocks and vibration.

More information about Baomain HD-ANL-200A #ad


Similar products



ANJOSHI Circuit Breaker 50amp 50A-300A with Manual Reset Home Solar System Fuse Holder for Car Audio and Amps Protection 12V-24V DC Reset Fuse Inverter Replace Fuses

#ad
ANJOSHI #ad - Suitable for most round cables for Solar Panel, DC power, satellite, Aerial, Air conditioning, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, 291, dicor sealant, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc. The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals.

Mount on panel or firewall Unique Push Button Reset can also be used as a Kill Switch. Includes: 2 straps and 4 strap clamps with screws. Dimensions: 12. 17 inches x 6. 61 inches x 9. 16 inches. Coast guard cfr 183. S. Work temperature: -10c to 50C -14F to 122F. Inner dimensions: 21. Unique push button Reset and Save Your Money to Replacing Fuses.

ANJOSHI Circuit Breaker 50amp 50A-300A with Manual Reset Home Solar System Fuse Holder for Car Audio and Amps Protection 12V-24V DC Reset Fuse Inverter Replace Fuses #ad - This contour battery master switch is widely used for car, atv, utV, Truck, Travel Trailer, RV, marine, Boat, Camper, Battery banks and other 0-48V Devices; 1 Year Warranty--a replacement or refund is guaranteed. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables.

2-inches H.

More information about ANJOSHI #ad


Similar products



12-Way Fuse Box Blade Fuse Block Holder Screw Nut Terminal W/Negative Bus 5A 10A 15A 20A Free Fuses LED Indicator Waterpoof Cover for Automotive Car Marine Boat

#ad
soyond #ad - Mount on panel or firewall Unique Push Button Reset can also be used as a Kill Switch. It is mechanically strong, combustion or short circuit phenomenon. Appliance name labels】 - bonus electric device name Labels are provided. Holder size: 123 x 38 x 38mm / 4. 8" x 1. 5" x 1. 5" l*w*h. This battery cut off kill switch has four removable side plates provide access of up to 1/0 cables.

Coast guard specifications: meets u. Unique push button Reset and Save Your Money to Replacing Fuses. Suitable for most round cables for Solar Panel, satellite, DC power, Aerial, Air conditioning, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, dicor sealant, 291, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc.

12-Way Fuse Box Blade Fuse Block Holder Screw Nut Terminal W/Negative Bus 5A 10A 15A 20A Free Fuses LED Indicator Waterpoof Cover for Automotive Car Marine Boat #ad - The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. Mounting in Pluggable in PCB Board. It is both safe and easy for you to check and replace the blown fuse. An ideal way for routing the cables while mounting solar panels on vehicles and boats, garages, as well as other installations on buildings, sheds etc.

Upg #45978 ub121000 12v 100ah. S.

More information about soyond #ad


Similar products



SELTERM 10 Pack 6 Gauge 6 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
SELTERM #ad - 7 specifications when used with 2 6V Group GC2 batteries. Safe material】 - made of environment friendly pbt material, deformation, insulated, heat resistant and flame resistant. Screw terminal blade fuse block】 - 12 circuits with negative bus and cover. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed.

The patented contour Locking System, can stand alone or be locked together with other switch. Coast guard cfr 183. An ideal way for routing the cables while mounting solar panels on vehicles and boats, garages, as well as other installations on buildings, sheds etc. Upg #45978 ub121000 12v 100ah. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard.

SELTERM 10 Pack 6 Gauge 6 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - Can be Crimped or Soldered. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Close end pad seals Out Moisture Keeping Cables Dry. This contour battery master switch is widely used for car, camper, Travel Trailer, atv, Truck, marine, UTV, RV, Boat, Battery banks and other 0-48V Devices; 1 Year Warranty--a replacement or refund is guaranteed.

Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables.

More information about SELTERM #ad


Similar products



BEP 701 Battery Switches - On-Off

#ad
Marinco 701 #ad - Coast guard specifications: meets u. 5-inches l x 7. This contour battery master switch is widely used for car, boat, atv, Truck, RV, marine, Travel Trailer, Camper, UTV, Battery banks and other 0-48V Devices; 1 Year Warranty--a replacement or refund is guaranteed. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables.

This ensures that the switch meets ABYC requirements. Manual reset circuit breaker 50A-300A for choose and Compatible with all 12-24 Volt Systems. Three removable side plates provide access of up to 1/0 cables. Operation: on/off, rating: 275a dc continuous 1hr, 1250a dc cranking 10 sec, voltage: 48v dc, 455A DC Intermittent 5 min, Stud Size: 2x3/8" 10mm.

BEP 701 Battery Switches - On-Off #ad - Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches. Control knob can be removed by switching to counter-clockwise 45° position. An ideal way for routing the cables while mounting solar panels on vehicles and boats, garages, as well as other installations on buildings, sheds etc.

Upg #45978 ub121000 12v 100ah. Easy to open insulating cover that provides access to fuses and satisfies ABYC/ USCG requirements,. Coast guard cfr 183. Tin-plated copper studs and nuts.

More information about Marinco 701 #ad


Similar products



TEMCo Hammer Lug Crimper Tool 5 Year Warranty

#ad
TEMCo TH0007 #ad - Also works well in a shop vise. Crimping type: Indent. Control knob can be removed by switching to counter-clockwise 45° position. Includes: 2 straps and 4 strap clamps with screws. Inline anl holder is suitable for 0 2 4 Gauge Square. Ul tested & Approved. This battery cut off kill switch has four removable side plates provide access of up to 1/0 cables.

TEMCo Hammer Lug Crimper Tool 5 Year Warranty #ad - Can be Crimped or Soldered. Terminal Type: Uninsulated. Wire gauge: 8 awg, 6 awg, 2 awg, 2/0, 4 awg, 1/0, 1 awg, 3/0 and 4/0. Ideal for Battery and Welding Cables. Temco industrial's 1 year free Return and 5 Year Void-Free Warranty. Operation: on/off 2 position; voltage: 6v-48v dc; rating: 275a dc continuous 1hr, 455a dc intermittent 5 min, 1250A DC Cranking 10 sec; Stud Size: 2x3/8" 10mm; Switch on = Power; Switch off = No power.

Tin-plated copper studs and nuts; Ignition-protected. 7 specifications when used with 2 6V Group GC2 batteries. Holder size: 123 x 38 x 38mm / 4. 8" x 1. 5" x 1. 5" l*w*h.

More information about TEMCo TH0007 #ad


Similar products