KISAE Technology SW1220 2000W True Sine Wave Power Inverter

KISAE Technology SW1220 - Automatic shutdown protects overload, over temperature and low/high battery conditions. Digital display to indicate battery condition, total output power and warning/error codes. Includes 5 Volt USB port. Gfci ac receptacle for connecting multiple loads. One-year warranty. High efficiency converts a battery's available power to AC.

True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life. True sine wave output is ideal for operating motor loads; and to reduce stress on surge protection circuitry; meaning potentially longer equipment life.

KISAE Technology SW1220 2000W True Sine Wave Power Inverter - True sinewave output 2000w power inverter 2000w of output from any 12vdc source; voltage nominal 12. 5vdc; operation Range 105 - 15. 5vdc. A compact 2000 watts inverter that easily converts 12 Volt vehicle power to 120 Volt household power.

More information about KISAE Technology SW1220

KISAE Technology RM1201-00 Inverter Remote On/Off Switch

KISAE Technology RM1201-00 - Monitors Battery status. Perform unit settings remotely. No assembly required. It allows the users to control on/off function from remote locations. Kisae's inverter remote on/off switch is for use with kisae modified sinewave & sinewave power inverters. Battery-run Remote.

More information about KISAE Technology RM1201-00


Similar products



SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

SELTERM - Ul tested & Approved. Can be Crimped or Soldered. Heavy duty construction for Enhanced High Temperature Durability. No assembly required. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. The copper lugs also meet S.

A. E conductivity standards and are RoHS compliant. Lugs are suitable for use with Welding Cables and Battery Cables. Close end pad seals Out Moisture Keeping Cables Dry. Monitors Battery status. Battery-run Remote. Perform unit settings remotely. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed.

SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug - Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product.

More information about SELTERM


Similar products



NOCO GCP1 13 Amp 125V AC Port Plug with 16-Inch Integrated Extension Cord

NOCO Genius GCP1 - Ac port plug with an integrated 16-inch extension cord. Rated at 13-amps, 125-volts 16AWG for peak performance. Requires no cable modification or hand wiring. Full-sized AC prongs for maximum conductivity. Easy installation into a 2-inch hole size. Battery-run Remote. The gcp1 is an ac port plug with a 16-inch integrated extension cord that offers optimal flexibility and ease of installation.

Rated at 13-amps, designed for use with all types of extension cords with Type-B plugs, 125-volts 16AWG, and UL approved. Can be Crimped or Soldered. And it makes a charging port, engine block, or garage outlet more accessible than ever before - giving you endless possibilities. Ul tested & Approved. Heavy duty construction for Enhanced High Temperature Durability.

NOCO GCP1 13 Amp 125V AC Port Plug with 16-Inch Integrated Extension Cord - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Monitors Battery status. Close end pad seals Out Moisture Keeping Cables Dry. It works with any extension cord and requires no cable modifications or hand wiring. Perform unit settings remotely.

More information about NOCO Genius GCP1


Similar products



Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors

TOOL-MC4 TOOL-MC4 - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Monitors Battery status. Ac port plug with an integrated 16-inch extension cord. Rated at 13-amps, 125-volts 16AWG for peak performance. Requires no cable modification or hand wiring. Full-sized AC prongs for maximum conductivity. Easy installation into a 2-inch hole size.

Very handy for the assembly of custom Mc4 wires. Perform unit settings remotely. The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors. Heavy duty construction for Enhanced High Temperature Durability.

Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors - For breaking connections after they have already been locked together. 100% compatible with Renogy MC4 connectors. Close end pad seals Out Moisture Keeping Cables Dry. Can be Crimped or Soldered. No assembly required. Ul tested & Approved.

More information about TOOL-MC4 TOOL-MC4


Similar products



Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat

Link Solar #201809213LS - Perform unit settings remotely. It can also be used for other installations and structures such as buildings, garages, sheds and other roofs Manufactured by Link Solar Battery-run Remote. Hard plastic. Monitors Battery status. 100% compatible with Renogy MC4 connectors. Can be Crimped or Soldered. For breaking connections after they have already been locked together.

Link solar abs solar cable entry gland is used for the passing of cables into the Motorhome, from the Solar panel, or for use on yachts /boats for cable entry from the mast. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. No assembly required. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc.

Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat - Ul tested & Approved. Close end pad seals Out Moisture Keeping Cables Dry. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. Heavy duty construction for Enhanced High Temperature Durability. Ac port plug with an integrated 16-inch extension cord.

More information about Link Solar #201809213LS


Similar products



On-Off - BEP 701 Battery Switches

Marinco 701 - Bep marine battery switch test procedures UL 1107 Continuous 1 hour, intermittent 5 minutes and Cranking engine starting - 10 seconds. Can be Crimped or Soldered. Suitable for most round cables for Solar Panel, DC power, Air conditioning, Aerial, satellite, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, dicor sealant, 291, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc.

The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. Tin-plated copper studs and nuts. Battery-run Remote. All bep switches are tested Independently to this specification by a 3rd party laboratory.

On-Off - BEP 701 Battery Switches - The continuous and intermittent ratings are tested at 110% of specified ratings. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc. Operation: on/off, voltage: 48v dc, rating: 275a dc continuous 1hr, 1250a dc cranking 10 sec, 455a dc intermittent 5 min, Stud Size: 2x3/8" 10mm.

Patented contour locking System allows switch to be a stand alone unit, or locked together with other switches.

More information about Marinco 701


Similar products



Blue Sea Systems Common 150A 10-Gang BusBar with Cover

Blue Sea Systems 53614311 - Ignition protected. Can be Crimped or Soldered. Perform unit settings remotely. Max voltage: 300v aC/ 48V DC. Ul tested & Approved. Close end pad seals Out Moisture Keeping Cables Dry. 150a common busbar with 10 screws and a cover. Continuous rating: 130A AC/ 150A DC. This ensures the switch meets ABYC requirements. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity.

No assembly required. Hard plastic. For breaking connections after they have already been locked together. 100% compatible with Renogy MC4 connectors. Three removable side plates for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. Suitable for most round cables for Solar Panel, DC power, satellite, Air conditioning, Aerial, Lighting etc.

Blue Sea Systems Common 150A 10-Gang BusBar with Cover - Can be fixed with glue not included sikaflex 221 Sikaflex 252, 291, dicor sealant, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc. The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

Control knob can be removed by switching to counter-clockwise 45° position.

More information about Blue Sea Systems 53614311


Similar products