OxGord Jumper Cable 4 Gauge x 25 Feet Commercial Grade 500 AMP Non Tangle Battery Booster Starter with Carry Case

OxGord CABC-04-25 - Simply clamp onto your car battery, and you'll be back on the road in no time Size: 4 gauge 25 feet, connecting to another vehicle, 500 Amp. These heavy duty jumper cables are color coded and easy to use. These heavy duty jumper cables are constructed of TPR material Thermoplastic Rubber, providing low temperature resistance -40 degree Fahrenheit/ -40 degree Celsius.

Ergonomic design: intuitive design making the cables easy to use on the top-post and side- terminal batteries. Color coded: the red and black cords will keep you from accidentally crossing wires. So your car won't start? Don't fret, we've all been there. Durable: built with dual construction and extra strong-grip copper teeth.

OxGord Jumper Cable 4 Gauge x 25 Feet Commercial Grade 500 AMP Non Tangle Battery Booster Starter with Carry Case - No need to call for help, which take up virtually no space in your trunk, because you bought OxGord's jumper cables, thanks to the nifty travel bag. Whether you accidentally left your headlights on all night, or you haven't started your car in a long time, you're going to need a boost. Carry case: includes a cca copper Coated Aluminum Travel Bag to Prevent Tangling in your trunk.

More information about OxGord CABC-04-25

HYCLAT 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer

HYCLAT CECOMINOD038518 - 5. Final adjustment push contacts and cable into housing until the notched tongue snaps over end of spring; tug slightly to make sure contact is locked into place. The mark of positive and negative are printed in the conncetor to avoid the misplug. In the kit, a couple of boot caps are included to protect this quick connect and disconnect kist from the dust.

Crimp the terminal pins. Very easy to install:. Insert the wires into the terminal pins, then solder or crimp them. 2. Insert the cable into the ternimal pins. 1. Strip the insulation to fit the terminal pins. Diameter of the terminal pins: 1/4" / 6. 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1".

HYCLAT 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer - Package include: 2x polycarbonate cover; 2x hard rubber boot caps; 4x terminal pins. 4. Insert terminal pins in housing with notched side of tongue next to spring. Connector ends are identical, so either end is suitable for connection to the power or load side. Warranty: 100% money back guarantee.

More information about HYCLAT CECOMINOD038518


Similar products



4-Pack 2 Positive, 2 Negative - InstallGear 4 Gauge AWG Crimp Ring Terminals Connectors

InstallGear IGCRT4-4 - From design, engineering and construction, InstallGear crimp ring terminals are built not only to look good but to maximize the performance of any audio system. Diameter of the terminal pins: 1/4" / 6. 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1". Ring size: 7/16". Wire input size: 5/16".

Product features: • 4 pack of 4 gauge crimp ring terminals 2 positive, 2 negative • colored rubber boots for wire end protection and polarity identification • Gold plated finish for maximum conductivity • Wire input size: 5/16" • Ring size: 7/16" Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices.

4-Pack 2 Positive, 2 Negative - InstallGear 4 Gauge AWG Crimp Ring Terminals Connectors - Package include: 2x polycarbonate cover; 2x hard rubber boot caps; 4x terminal pins. Connector ends are identical, so either end is suitable for connection to the power or load side. Warranty: 100% money back guarantee. Insert the wires into the terminal pins, then solder or crimp them. If there is any question, please feel free to contact with us.

4 pack of 4 gauge crimp ring terminals 2 positive, 2 negative. Easy to install. Colored rubber boots for wire end protection and polarity identification.

More information about InstallGear IGCRT4-4


Similar products



OrionMotorTech 4 Pcs 2-4 Gauge 175A Battery Cable Quick Connect Disconnect Plug Kit Recovery Winch Trailer, 12-36V DC 4 Pcs

Orion Motor Tech 13 - The bottom of the device features a fitted rubber boot to protect against dust, moisture and corrosion. Insert the wires into the terminal pins, then solder or crimp them. This connector kit allows for quick and convenient connect/disconnect of power from a winch or from another electrical device such as a remote battery charger, trailer, etc.

Package include: 2x polycarbonate cover; 2x hard rubber boot caps; 4x terminal pins. Gold plated finish for maximum conductivity. 1-year warranty; 100% replacement or 100% refund. Description: 1. 3. Ring size: 7/16". Colored rubber boots for wire end protection and polarity identification. Direct-current use high-voltage connectors usually have a socket and plug arrangement, or power end, so the socket, can be fully enclosed.

OrionMotorTech 4 Pcs 2-4 Gauge 175A Battery Cable Quick Connect Disconnect Plug Kit Recovery Winch Trailer, 12-36V DC 4 Pcs - The terminal pins accept wire from 2 to 4 gauge. Package includes: 2 pair of connectors: 4 connector ends, 8 terminal pins and 4 rubber boot caps specifications: model: sc175 connector size: 3-1/8 x 2-1/8 x 1 inches connected set size: 5-1/4 x 2-1/8 x 1 inches Operating Temperature Range:-4°F-221°F / -20°C-105°C Medium Withstanding Voltage: 2200 DC Vibration Resistance: Excellent Impact Resistance: High Connect/Disconnect Cycles: 10, 000 Times Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices.

Easy to install. 4.

More information about Orion Motor Tech 13


Similar products



HYCLAT Red 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer 4 Pack

HYCLAT 13 - Package:4 connector ends, and 4 rubber boot caps fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, 8 terminal pins, trailers or other electrical devices. Easy to install. Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers or other electrical devices.

Crimp the terminal pins. Very easy to install:. Colored rubber boots for wire end protection and polarity identification. Wire input size: 5/16". 3. 2. Insert the cable into the ternimal pins. If there is any question, please feel free to contact with us. Insert the wires into the terminal pins, then solder or crimp them.

HYCLAT Red 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer 4 Pack - The mark of positive and negative are printed in the conncetor to avoid the misplug. Insert the wires into the terminal pins, then solder or crimp them. Ring size: 7/16". 1-year warranty; 100% replacement or 100% refund. Connector ends are identical, so either end is suitable for connection to the power or load side.

More information about HYCLAT 13


Similar products



10pcs Purple Copper Terminal Lugs 4 AWG Battery Cable Tubular Lug Ring Terminal Connectors 4AWG - 3/8'' Ring

Super Cloud - If there is any question, please feel free to contact with us. 4 pack of 4 gauge crimp ring terminals 2 positive, 2 negative. Simple installation. Package include: 2x polycarbonate cover; 2x hard rubber boot caps; 4x terminal pins. Wire input size: 5/16". Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices.

Easy to install. Connector ends are identical, so either ends is suitable for connection to the power or load side. Connector dimension: 3 1/8" l x 2 1/8" w x 1" h; connected set dimension: 5 1/4" l x 2 1/8" W x 1" H; package include: 4 X polycarbonate cover, 4 X hard rubber boot caps; 8 X terminal pins. Colored rubber boots for wire end protection and polarity identification.

10pcs Purple Copper Terminal Lugs 4 AWG Battery Cable Tubular Lug Ring Terminal Connectors 4AWG - 3/8'' Ring - Connector ends are identical, so either end is suitable for connection to the power or load side. Warranty: 100% money back guarantee. Diameter of the terminal pins: 1/4" / 6. 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1". 2-4 gauge wire; terminal pins diameter: 035"; voltage: 12-36 volts DC; capacity: 175 Amps.

More information about Super Cloud


Similar products



HYCLAT Gray 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer 2 Pack

HYCLAT 8542122271 - Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers or other electrical devices. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side.

Warranty: 100% money back guarantee. Wire input size: 5/16". Package include: 2x polycarbonate cover; 2x hard rubber boot caps; 4x terminal pins. 1. Strip the insulation to fit the terminal pins. Package include: 4x polycarbonate cover; 4x hard rubber boot caps; 8x terminal pins. Diameter of the terminal pins: 1/4" / 6.

HYCLAT Gray 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer 2 Pack - 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1". Easy to install. Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices. Package:2 connector ends, and 2 rubber boot caps fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, 4 terminal pins, trailers or other electrical devices.

The terminal pins are made of red copper coated by silver, which has a strong electrical conductivity and can reduce the resitance to make the current and voltage stable.

More information about HYCLAT 8542122271


Similar products



Schumacher SC1281 6/12V Fully Automatic Battery Charger and 30/100A Engine Starter with Advanced Diagnostic Testing

Schumacher SC1281 6/12V Fully Automatic - Doe compliant. Simple installation. 2-4 gauge wire; terminal pins diameter: 035"; voltage: 12-36 volts DC; capacity: 175 Amps. Contains battery and alternator tester which provides charge level and helps diagnose electrical problems. Package include: 2x polycarbonate cover; 2x hard rubber boot caps; 4x terminal pins.

Wire input size: 5/16". Compatible with standard, AGM, gel, and deep-cycle batteries. Insert the wires into the terminal pins, then solder or crimp them. Easy to install. Reverse hook-up protection ensures charger will not operate if clamps are reversed. Connector ends are identical, so either end is suitable for connection to the power or load side.

Warranty: 100% money back guarantee. Package include: 4x polycarbonate cover; 4x hard rubber boot caps; 8x terminal pins. Connector dimension: 3 1/8" l x 2 1/8" w x 1" h; connected set dimension: 5 1/4" l x 2 1/8" W x 1" H; package include: 4 X polycarbonate cover, 4 X hard rubber boot caps; 8 X terminal pins.

Schumacher SC1281 6/12V Fully Automatic Battery Charger and 30/100A Engine Starter with Advanced Diagnostic Testing - Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers or other electrical devices. Led indicators and Start/Stop push button interface improves accuracy and ease of use. Features 30a for quick energy boost and 100A to jump start your car right away.

More information about Schumacher SC1281 6/12V Fully Automatic


Similar products



NoOne Booster Cable, 6 Gauge 12-Feet Emergency Booster Jumper Cables with Led Light, Battery Jumper Cables For Cars Trucks Suvs with Safety Gloves and Storage Bag

NoOne KJBC004 - Easy to install. In order to prevent this kind of worrying and sad situation from happening. Colored rubber boots for wire end protection and polarity identification. Diameter of the terminal pins: 1/4" / 6. 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1". Not the negative battery post.

3. Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices. Connect one red positive+cable end to the positive+post of the dead battery. 7. The twice clamping design inside the clamps is more firm, fits both top and side post batteries.

NoOne Booster Cable, 6 Gauge 12-Feet Emergency Booster Jumper Cables with Led Light, Battery Jumper Cables For Cars Trucks Suvs with Safety Gloves and Storage Bag - Perfect for cars, vans, motorcycles, trucks, coupes, SUVs, sedans and more.6. It’s safe and durable -All-insulated handles over the clamps, getting rid of the danger of an electric shock. Simple installation. Diameter of the terminal pins: 1/4" / 6. 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1".

More information about NoOne KJBC004


Similar products



ELECFUN 56pcs 8-4 AWG Assorted Heavy Duty Lugs Battery Cable Tinned Copper Ring Terminal Connectors with Spy Hole

ELECFUN - Connector ends are identical, so either ends is suitable for connection to the power or load side. Thank you for choosing ELECFUN. Gold plated finish for maximum conductivity. Features multi-stage charging and auto-voltage detection for added precision, safety and battery life. Charges compatible battery types, AGM, including standard, gel and deep-cycle batteries.

Applicable vehicles ideal for full size cars, cargo vans, mid-size SUVs, motorcycles, freight hauling vehicles and more. Led light the lamp will turn on when the clamp is opened, which is convenient for one-handed operation at night, It is easy to find right pole and will prevent reverse connecting. Cold resistance the cable stays flexible even in very cold weather-40 centigrade/-40 Fahrenheit.

ELECFUN 56pcs 8-4 AWG Assorted Heavy Duty Lugs Battery Cable Tinned Copper Ring Terminal Connectors with Spy Hole - Insulation only teeth conduct electricity, so it is difficult to cause short circuit accidents. Novice label connect in order of 1, 2, 3, 4. If there is any question, please feel free to contact with us. Stud size: 3/8 inch. If there is any question, please feel free to contact with us. 4 pack of 4 gauge crimp ring terminals 2 positive, 2 negative.

Easy to install.

More information about ELECFUN


Similar products



InstallGear 4 AWG Gauge Gold Ring Set Screw Battery Ring Terminals 4 Pack

InstallGear IGSSRT4-4 - Simple installation. Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers or other electrical devices. Diameter of the terminal pins: 1/4" / 6. 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1". If there is any question, please feel free to contact with us.

4 pack of 4 gauge crimp ring terminals 2 positive, 2 negative. Package include: 2x polycarbonate cover; 2x hard rubber boot caps; 4x terminal pins. Red/black gear logo to differentiate between positive and negative. Connector ends are identical, so either end is suitable for connection to the power or load side.

InstallGear 4 AWG Gauge Gold Ring Set Screw Battery Ring Terminals 4 Pack - Warranty: 100% money back guarantee. Wire input size: 5/16". Reverse hook-up protection ensures charger will not operate if clamps are reversed. Easy to install. Easy to install. Used for 4 AWG Cable. Made of pure copper tube with strong durability. 99.

More information about InstallGear IGSSRT4-4


Similar products