POTEK 5000W Power Inverter DC 12V to AC 110V Car Inverter 4 AC Outlets with 2 USB Outputs

#ad
POTEK INC #ad - Specifications: power 4 ac outlets: 5000w rated, 10000w Peak USB output: DC 5V/2A Nominal input voltage:12. 8-13. 2vdc nominal output voltage: 110-125VDV Maximum no load current drawat nominal input voltage: 1. 5adc maximum efficiency: 90% output frequency:60Hz±3Hz Output wave: modified sine wave Battery cables:Three black, three red, 3.

28′ more details and tips: connect the inverter to a battery, and plug your AC devices into the inverter Run most of capacitive/inductive/resistive loads with improved program Please do not leave the power inverter in the ON position while your car is off. What you can get:potek 5000w power inverterred, 6xCar Battery Cables, 1xUser Manual and our friendly customer service.

Disconnect the positive battery terminal before doing any wiring to the inverter do not let the inverter into sunlight directly, keep it in cool environment Package List: 1x 5000W Power Inverterred 6xCar Battery Cables 1xUser Manual Potek 5000watt power inverter:provides 5000 watts continuous power, 10000 watts surge power to charge your multiple electronic devices.

POTEK 5000W Power Inverter DC 12V to AC 110V Car Inverter 4 AC Outlets with 2 USB Outputs #ad - Multi-purpose charging :with 2a*2 usb port and 4 AC outlets, water dispensers, ideal for charging cell phones, electric motor saw, air compressor, refrigerator, laptops, coffer maker, etc. Multi-protection: provides protection against overload, low voltage, overheat, high voltage and short circuit. Intelligent cooling fan: smart cooling fan makes it silent when temperature range of heatsink is below 104℉ and can also save battery's electricity for longer utility time.

Why potek?:potek is devoted to providing best quality products with a better price.

More information about POTEK INC #ad

WindyNation ANL Fuse Holder + ANL Fuse 2pcs 200A Fuse

#ad
WindyNation ANL-FH-200-2 #ad - It is the end user's responsibility to determine the appropriate fuse size for the electrical circuit. In general, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt.

Anl fuse holder will accept up to a maximum of 2/0 gauge cable. See images for technical specifications and dimensional drawings. Includes 1pc windynation anl Fuse Holder + 2pcs ANL 200A Fuses. For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse.

WindyNation ANL Fuse Holder + ANL Fuse 2pcs 200A Fuse #ad - The windynation anl fuse holder with fuses are used in electrical systems in which the fuse is designed to burn out when the current exceeds the safe limit for the device being protected by the fuse. Anl fuse holder mounting bolts are 8 mm in diameter.

More information about WindyNation ANL-FH-200-2 #ad


Similar products



SELTERM 10 Pack 2 Gauge 2 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
SELTERM #ad - For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse. Lugs are suitable for use with Welding Cables and Battery Cables. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. See images for technical specifications and dimensional drawings.

Canadian saftey standards and rated for upto 600V DC when properly installed; RoHS & REACH compliant. Choose from a variety of wire and stud sizes that fits your application; Can be crimped or soldered; Use with a compatible copper cable; Product dimensions provided in the secondary image. Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed.

SELTERM 10 Pack 2 Gauge 2 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - Anl fuse holder mounting bolts are 8 mm in diameter. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. Selterm bare copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow.

The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard. Includes 1pc windynation anl Fuse Holder + 2pcs ANL 200A Fuses. These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.

More information about SELTERM #ad


Similar products



WindyNation ANL Fuse Holder + ANL Fuse 2pcs 250A Fuse

#ad
WindyNation ANL-Fh-250-2 #ad - Anl fuse holder will accept up to a maximum of 2/0 gauge cable. Anl fuse holder mounting bolts are 8 mm in diameter. Approved by oems, our electrical wire ring connectors are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength. This particular variant is generally suitable for use with 2 Gauge Wire & 3/8" Eye M10 Stud.

In general, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse. Selterm bare copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow. For most applications, the fuse should be sized at approximately 1.

30 times the rated power of the device being protected by the fuse. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt. See images for technical specifications and dimensional drawings. For most applications, the fuse should be sized at approximately 1.

WindyNation ANL Fuse Holder + ANL Fuse 2pcs 250A Fuse #ad - 30 times the rated power of the device being protected by the fuse. Canadian saftey standards and rated for upto 600V DC when properly installed; RoHS & REACH compliant. Choose from a variety of wire and stud sizes that fits your application; Can be crimped or soldered; Use with a compatible copper cable; Product dimensions provided in the secondary image.

More information about WindyNation ANL-Fh-250-2 #ad


Similar products



BougeRV 30 Feet 10AWG Solar Extension Cable with Female and Male Connector Solar Panel Adaptor Kit Tool 30FT Red + 30FT Black

#ad
BougeRV ISE031 #ad - This particular variant is generally suitable for use with 2 Gauge Wire & 3/8" Eye M10 Stud. Selterm bare copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow. Specifications: length: 30 feet one pair Wire Gauge: 10AWG Rating Voltage: -DC :1.

8kv -ac: 06~1kv degree of protection: ip65 fire rated: iec60332-1 temperature: -40~﹢90℃ Normal Cross Sectional Area of the Conductor mm2: 6. 0 service life: >25 years( -40~﹢90℃) package included: one pair 1 piece black + 1 piece red 30 Feet 10AWG CableNoteOnly one end has an connector, which convenient for you to cut cable to adjustment length Includes 1pc windynation anl Fuse Holder + 2pcs ANL 200A Fuses.

BougeRV 30 Feet 10AWG Solar Extension Cable with Female and Male Connector Solar Panel Adaptor Kit Tool 30FT Red + 30FT Black #ad - Anl fuse holder mounting bolts are 8 mm in diameter. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt. Extends and locks built-in cables. For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse.

Approved by oems, our electrical wire ring connectors are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength. Two cables with connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller.

More information about BougeRV ISE031 #ad


Similar products



Battery Monitor, DROK 10-100V Digital Battery Capacity Tester, Percentage Level Voltage Temperature Switch Meter Gauge 12V 24V 36V 48V LCD Display Marine RV Battery Power Indicator Panel

#ad
DROK #ad - Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt. Anl fuse holder mounting bolts are 8 mm in diameter. The wiring is weatherproof and designed to withstand extreme heat and cold. Using large diameter cable minimizes power loss in your solar panel system.

Applicable battery - drok digital battery monitor is suitable for 10-100v 12v 24v 36v 48v 60v 72v 96v lithium battery, lead-acid battery, lithium iron phosphate battery, Ni MH battery. For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse.

Battery Monitor, DROK 10-100V Digital Battery Capacity Tester, Percentage Level Voltage Temperature Switch Meter Gauge 12V 24V 36V 48V LCD Display Marine RV Battery Power Indicator Panel #ad - . This particular variant is generally suitable for use with 2 Gauge Wire & 3/8" Eye M10 Stud. These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation. Designed for durability, and tested to meet s.

A. E conductivity standards j163 & J1811; UL listed to U. S. For most applications, the fuse should be sized at approximately 1.

More information about DROK #ad


Similar products



ASE Test Preparation - T4 Brakes ASE Test Preparation for Medium/Heavy Duty Truck Brakes Test T4: Brakes Test T4 ASE Test Preparation: Medium/Heavy Duty Truck Technician Certification

#ad
Cengage Learning #ad - Anl fuse holder will accept up to a maximum of 2/0 gauge cable. Applicable battery - drok digital battery monitor is suitable for 10-100v 12v 24v 36v 48v 60v 72v 96v lithium battery, lead-acid battery, lithium iron phosphate battery, Ni MH battery. Selterm bare copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow.

Anl fuse holder will accept up to a maximum of 2/0 gauge cable. The solar panel cable offered in this listing is 10 AWG which is the largest diameter of the three. Includes 1pc windynation anl Fuse Holder + 2pcs ANL 250A Fuses. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt.

Free a pair of separate connectors, one pair 1 piece black + 1 piece red 30 Feet 10AWG Solar Extension Cable. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt. See images for technical specifications and dimensional drawings.

ASE Test Preparation - T4 Brakes ASE Test Preparation for Medium/Heavy Duty Truck Brakes Test T4: Brakes Test T4 ASE Test Preparation: Medium/Heavy Duty Truck Technician Certification #ad - Default 12 volt lead acid battery. Application - this multimeter can be used as battery voltage meter, boat, marine, battery capacity tester and temperature indicator panel for car, RV, etc. Protection - the battery power detector comes with protective shell, dustproof waterproof surface; input reverse connection protection.

More information about Cengage Learning #ad


Similar products



SCOSCHE X2WFH Single ANL Fuse holder

#ad
SCOSCHE X2WFH #ad - Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt. Using large diameter cable minimizes power loss in your solar panel system.

Selterm bare copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow. Includes 1pc windynation anl Fuse Holder + 2pcs ANL 250A Fuses. Includes 1pc windynation anl Fuse Holder + 2pcs ANL 200A Fuses. Default 12 volt lead acid battery. Application - this multimeter can be used as battery voltage meter, boat, RV, battery capacity tester and temperature indicator panel for car, marine, etc.

SCOSCHE X2WFH Single ANL Fuse holder #ad - Protection - the battery power detector comes with protective shell, dustproof waterproof surface; input reverse connection protection. Lcd display - the battery status reader adopts clear LCD color screen, voltage, displays battery capacity, temperature valueswitched by the key. Alarm - if low voltage, red indicator flashes and buzzer alarms.

Anl fuse holder with ABS Cover. X2 battery terminals, fuse holders and distribution blocks featured nickel plated terminals and impact resistant covers for enhanced durability.

More information about SCOSCHE X2WFH #ad


Similar products



Schumacher BAF-MT1 Top Post, Marine Terminal, 3/8"-5/16", Pair

#ad
Schumacher BAF-MT1 #ad - Durable finish and conductivity. For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse. Approved by oems, our electrical wire ring connectors are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength.

Anl fuse holder will accept up to a maximum of 2/0 gauge cable. Easy installation of multiple amplifier Combinations. Using large diameter cable minimizes power loss in your solar panel system. For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse.

Extends and locks built-in cables. Two cables with connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller. Applicable battery - drok digital battery monitor is suitable for 10-100v 12v 24v 36v 48v 60v 72v 96v lithium battery, lithium iron phosphate battery, lead-acid battery, Ni MH battery.

Schumacher BAF-MT1 Top Post, Marine Terminal, 3/8"-5/16", Pair #ad - The wiring is weatherproof and designed to withstand extreme heat and cold. These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation. Designed for durability, and tested to meet s.

More information about Schumacher BAF-MT1 #ad


Similar products



LockNLube Grease Gun Coupler locks onto Zerk fittings. Grease goes in, not on the machine. World's best-selling original locking grease coupler. Rated 10,000 PSI. Long-lasting rebuildable tool.

#ad
LockNLube 1/8" NPT #ad - Won't leak once locked onhands-free, does not release under pressureRated up to 10, 000 PSI1/8 NPT thread. For most applications, the fuse should be sized at approximately 1. 30 times the rated power of the device being protected by the fuse. Lowest lifetime cost. The wiring is weatherproof and designed to withstand extreme heat and cold.

Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt. Anl fuse holder mounting bolts are 8 mm in diameter. Includes 1pc windynation anl Fuse Holder + 2pcs ANL 250A Fuses. Grease goes in, not on, the machine. See images for technical specifications and dimensional drawings.

LockNLube Grease Gun Coupler locks onto Zerk fittings. Grease goes in, not on the machine. World's best-selling original locking grease coupler. Rated 10,000 PSI. Long-lasting rebuildable tool. #ad - Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt. Extends and locks built-in cables. These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.

Designed for durability, and tested to meet s. A.

More information about LockNLube 1/8" NPT #ad


Similar products



SoundBox Connected 0 Gauge Red/Black Amplifier Power/Ground Wire Set, 50 Ft. Cables

#ad
SoundBox KIT0-25RB #ad - General features: soundbox 1/0 gauge power/ground cable ultraflex heat tested wire jacket -2- pre-cut 25 rolls 1- 25 ft red/ 1- 25 ft black  -1- premium 1/0 gauge anl fuse holder -1- 250 amp anl fuse  features and details: ultraflex 1/0 gauge power/Ground Wire Grade A1 Standard Tested CCA Copper Clad Aluminum  What's Included: 25'- 1/0 Gauge Red Power Wire, CW0-25BK Premium ANL Fuse Holder w/ 250 Amp Fuse, CW0-25R 25'- 1/0 Gauge Black Ground Wire, LC-FALv3 Bulk Packaged, Not for Resale.

Wire is not awg american wire gauge. Canadian saftey standards and rated for upto 600V DC when properly installed; RoHS & REACH compliant. Choose from a variety of wire and stud sizes that fits your application; Can be crimped or soldered; Use with a compatible copper cable; Product dimensions provided in the secondary image.

SoundBox Connected 0 Gauge Red/Black Amplifier Power/Ground Wire Set, 50 Ft. Cables #ad - See images for technical specifications and dimensional drawings. 1/8" npt compatible with all grease guns - battery, pneumatic, manual. Fit 3/8 inch and 5/16 inch posts. Ultraflex Heat Tested Wire Jacket. Easy installation of multiple amplifier Combinations. Grease goes in, not on, the machine. Lowest lifetime cost.

More information about SoundBox KIT0-25RB #ad


Similar products