Powereco 100 Watt Solar Kit for 12V Battery of RV and Boat; Monocrystalline Solar Panel with 20A LCD Charge Controller, MC4 Tray Cable and Z-Brackets for Mounting … 100w, Kit with Controller

PowerECO - It includes 1 100 watts solar panel 2 charge controller 3 Z-bracket  4 20ft MC4 cable The kit allows a permanent installation on the roof of RV or boat. It would produce 100Wx6Hourx075 effiency= 450wh or 37ah 12v Battery for single day on average with good sunlight. 100w expansion asin:b06xpmkp62  can add in parallel with kit to be 200W 12V system.

Panel Specification. Peak power pmax:100w Peak Circuit VoltageVoc:22. 5v max power VoltageVmp:18. 9v short circuit CurrentIsc:5. 75a max power CurrentImp:5. 29a power tolerance range:±3% maximum system Voltage DC:1000V Wind resistance:2400pa Weight:16. 5lb dimension:47*21. 3*1. 4 inch application class:class A Test condition:1000W/m², AM1.

Powereco 100 Watt Solar Kit for 12V Battery of RV and Boat; Monocrystalline Solar Panel with 20A LCD Charge Controller, MC4 Tray Cable and Z-Brackets for Mounting … 100w, Kit with Controller - 5, 25℃    charge controller specification: voltage: dc 12v/24v max solar panel power:12v/260w, 24v/520w rated Charge Current: 20A USB output: 5V/2A Operating temperature: -35℃-60℃ Overloading and short-circuit protection. Short-circuit protection,, rvs, sealed, lithium not for nickel hydride, open-circuit protection, gel, over-load protectionprotection from lightning strikeProlong the battery life cycle and keep the load work well suitable for lead acid batteries:OPEN, pond, or other batteries     100w kit designed as a basic component of off-grid 12v solar system for caravan, cars, green house solar systems for 12 Volt battery including GEL, ions, AGM, reverse protection, boats, FLOODED Wet Cell and Lithium Battery.

Kit has 100w monocrystalline solar module, 20a pwM charge controller, 20ft 12AWG cable with MC4 connector for connection of charge controller and a set of z-brackets.

More information about PowerECO

bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt

bayite 2698849581 - This module is suitable for indoor, please do not use outdoor. Large-screen lcd display voltage, active power, current, energy at the same time. Note: only display and shunt are included. Applied load should not exceed the rated power. Can be reset to 0 The blue backlight can be turned on/off manually Test Range and Display format: 1.

Active power test range: 0~10kW 2. Energy test range: 0~9999kWh 3. Voltage test range: DC 6. 5~100v 4. Current test range: 0~ 100A Precautions 1. Store energy data when power offcan be reset to 0 Wiring order cannot be wrong. 2. 4. 3. The blue backlight can be turned on/off manually. It doesn't include any wire or accessories.

bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt - Main specifications: Working voltage: DC 6. 5 ~ 100v measuring accuracy: 1% Power Consumption: 02w measurement speed: 2 times/s Store Energy data when power off.

More information about bayite 2698849581


Similar products



Renogy MC4 Y Branch Connectors Solar MC4 Connectors Y connector Solar panel mounts in Pair MMF+FFM

Renogy CNCT-MC4Y - Compatible with mc4 connectors Also known as MC4 T connectors. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. Renogy mc4 branch connectors are used for parallel wiring solar panels PV modules. Voltage test range: dc 6. 5~100v; current test range: 0~100A. It doesn't include any wire or accessories. Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA.

Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C. Large-screen lcd display voltage, current, active power, energy at the same time. Note: only display and shunt are included. Sold as a pair, these "y-connectors" will maintain the voltage of the solar panel configuration to match the battery size.

Renogy MC4 Y Branch Connectors Solar MC4 Connectors Y connector Solar panel mounts in Pair MMF+FFM - Store energy data when power offcan be reset to 0 The blue backlight can be turned on/off manually. These connectors are solely compatible with MC4 connectors and come with one male MMF and one female FFM connector. Use these mc4 branch Connectors to make tight, waterproof connections. Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA.

More information about Renogy CNCT-MC4Y


Similar products



BougeRV MC4 Connectors Y Branch Parallel Adapter Cable Wire Plug Tool Kit for Solar Panel

BougeRV ISE002FBM - Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA. Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V. It doesn't include any wire or accessories. Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL.

. The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable single core cable Section: 1. 5mm² -- 6mm². Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male. Compatible with mc4 connectors Also known as MC4 T connectors. Specification: • insulation material: ppo • rated current: 20a4mm²) • rated voltage: dc1000v • contact resistance: ≤5mΩ • insulation resistance: >500mΩ • Operating Temperature range: -40℃ until+90℃ • Degree of Protection: IP67 • Flame Class: UL94-V0 • Safety Degree: Ⅱ • Suitable Single Core Cable Section: 1.

BougeRV MC4 Connectors Y Branch Parallel Adapter Cable Wire Plug Tool Kit for Solar Panel - 5mm² -- 6mm² include awg14, awg11, awg12, awg13, awg10 package included: 1 pair of Y Branch MC4 Solar Panel Cable Connectors Voltage test range: dc 6.5~100v; current test range: 0~100A. Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C. Store energy data when power offcan be reset to 0

More information about BougeRV ISE002FBM


Similar products



HIGHROCK Ac Dc 12v 10a Auto on Off Photocell Light Switch Photoswitch Light Sensor Switch

HIGHROCK HIGHROCK-SS1 - One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. Compatible with mc4 connectors Also known as MC4 T connectors. Do not install the control unit in a place extremely darker in daytime or a place directly by lighting of turning - ON lamp. Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C.

Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. Large-screen lcd display voltage, active power, current, energy at the same time. Note: only display and shunt are included. The blue backlight can be turned on/off manually. Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male.

HIGHROCK Ac Dc 12v 10a Auto on Off Photocell Light Switch Photoswitch Light Sensor Switch - Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V. Widely used: street light, factories, airports, ports, schools, garden, highway, parks, farm, and other places. Also can fit into solar lamps and lanterns, motorcycles, or cars, electric cars and other power supply voltage is 12V lamps and lanterns or equipment.

To turn on or off the light in day and night without manual operation on or off the light in day and night without manual operation. Store energy data when power offcan be reset to 0 Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA.

More information about HIGHROCK HIGHROCK-SS1


Similar products



Signstek Y Branch MC4 Parallel Connector Adapter M/FF and F/MM 1

Signstek U-1-2 - Specifications: insulation material:tpe ppov rated current:10a-30a rated voltage:1000vtuv&600vul test voltage:6kv50hz, lmin typical contact resistance:≤5mΩ Contact material:Copper, Tin plated Degree of protection:IP67 Safety degree:ll Flame class:UL94-V0 Material RTl:110℃ Ambient temperature range:-40℃ until+85℃ Wire Size:4mm²/6mm² Voltage test range: dc 6.

5~100v; current test range: 0~100A. Do not install the control unit in a place extremely darker in daytime or a place directly by lighting of turning - ON lamp. Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V. It doesn't include any wire or accessories. Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument.

Signstek Y Branch MC4 Parallel Connector Adapter M/FF and F/MM 1 - With overload alarm functionIf active power is larger than threshold, backlight and power will flash. The blue backlight can be turned on/off manually. Suitable for PV system. It does not need extra instruments for the removal of plugs and removal will not cause any harm to plugs. The cable connection adopts means of rivet and lock.

With excellent aging resistance and UV endurance, it can be used in harsh environment. Fast shipping directly from US warehouse.

More information about Signstek U-1-2


Similar products



ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V

ALLPOWERS AP-OT-002-BBLU - The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable single core cable Section: 1. 5mm² -- 6mm². Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C. Make sure your battery has enough voltage for the controller to recognize the battery before first installation.

One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. It is easy to set up and operate. Functionality: equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management. Any items ordered from other sellers, suitable for home, industrial, it can be conveniently switched modes and parameter configuration, ALLPOWERS will not be responsible for the After-Sales.

ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V - Protection from lightning strike. With overload alarm functionIf active power is larger than threshold, backlight and power will flash. Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. Specification: *voltage: dc 12v/24v *self-consuming: 10ma *rated Charge Current: 20A *Rated Load Current: 20A *Over charge Protection: 14.

4v/28. 8v *over charge Floating charge: 13.

More information about ALLPOWERS AP-OT-002-BBLU


Similar products



Blue Sea Systems Common 150A 10-Gang BusBar with Cover

Blue Sea Systems 53614311 - Store energy data when power offcan be reset to 0 Adjustable power rate with dual usb ports; 3-StageBulk, ABS, Float charge management and 4-Stage PWM charge. Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male. Continuous rating: 130A AC/ 150A DC. Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V.

Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. Max voltage: 300v aC/ 48V DC. With overload alarm functionIf active power is larger than threshold, backlight and power will flash. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. To turn on or off the light in day and night without manual operation on or off the light in day and night without manual operation.

Blue Sea Systems Common 150A 10-Gang BusBar with Cover - The blue backlight can be turned on/off manually. Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA. Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C. It doesn't include any wire or accessories. Warranty only against products from ALLPOWERS.

The industry standard busbar for positive or negative power distribution Bus material - Tin platted Copper CDA 110/UnS C1100 Insert molded stainless steel studs eliminate need for securing nut and allow high torqueing electrical contact.

More information about Blue Sea Systems 53614311


Similar products



Fan-Tastic Vent RV Roof Vent, 3-Speed Manual Crank RV Vent Fan, Smoke Dome RV Vent Cover - 1200 Series - White

Fan-Tastic Vent 8000 ABS LID - It doesn't include any wire or accessories. Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C. Continuous rating: 130A AC/ 150A DC. White, high profile base and smoke dome. Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA. Max voltage: 300v aC/ 48V DC.

With overload alarm functionIf active power is larger than threshold, backlight and power will flash. It's pleasantly quiet and energy saving, too. Easy to use - the manual lift dome ensures the FanTastic Vent is easy to use. Perfect fit - fits standard 14 inch x 14 inch openings. Store energy data when power offcan be reset to 0

Fan-Tastic Vent RV Roof Vent, 3-Speed Manual Crank RV Vent Fan, Smoke Dome RV Vent Cover - 1200 Series - White - Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. In 2010, fan-tastic vent was acquired by Atwood Mobile Products LLC, a leading supplier to the recreation vehicle industry. As sales continued to grow, Michigan, the company moved to a larger facility in Capac, in 1995.

Large-screen lcd display voltage, current, active power, energy at the same time. Note: only display and shunt are included. Model 1200 - this lightweight, compact, and durable vent fan seals tight when not in use.

More information about Fan-Tastic Vent 8000 ABS LID


Similar products