Renogy 160 Watt 12 Volt Monocrystalline Solar Panel, 160W Mono,

Renogy Solar Panel - A corrosion-resistant aluminum frame allows for extended outdoor use with a typical lifespan of decades. El tested solar modules; no hot-spot heating guaranteed. Pre-drilled holes are included for grounding. Bypass diodes minimize power drops caused by shade and ensure excellent performance in low-light environments.

The renogy 160w 12v monocrystalline Solar Panel is a key component to any solar power PV system. Whether you take it camping in the mountains or for a trip to the beach, This off-grid panel can be a great start or addition to any Renogy off-grid system! Each Renogy 160W monocrystalline Solar Panel is capable of withstanding heavy snow & strong wind loads.

Renogy 160 Watt 12 Volt Monocrystalline Solar Panel, 160W Mono, - The mc4 leads are compatible with the Renogy MC4 Adaptor Kit - allowing for a quick & simple connection. Ip65 rated junction box provides complete protection against environmental Particles and low pressure water jets. Versatile can be used for many different applications. Compatible with a variety of Renogy mounting systems such as z-brackets and tilt mounts.

Each solar panel includes MC4 leads that extend from the junction box affixed to the back of each panel. Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance. Each panel is quality tested to ensure safety & longevity.

More information about Renogy Solar Panel

Renogy MC4 Y Branch Connectors Solar MC4 Connectors Y connector Solar panel mounts in Pair MMF+FFM

Renogy CNCT-MC4Y - Compatible with mc4 connectors Also known as MC4 T connectors. These connectors are solely compatible with MC4 connectors and come with one male MMF and one female FFM connector. Sold as a pair, these "y-connectors" will maintain the voltage of the solar panel configuration to match the battery size. Renogy mc4 branch connectors are used for parallel wiring solar panels PV modules.

Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. Use these mc4 branch Connectors to make tight, waterproof connections. Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA. Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C.

More information about Renogy CNCT-MC4Y


Similar products



RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect

Renogy 5MC4 - Description renogy cable connectors are made with highest quality materials. This is to ensure the long term durability. You can feel that they are heavier & sturdier than other similar products in the market. Renogy mc4 male/female solar panel cable connectors five pairs of mc4 solar panel cable connectors ten silver plated copper rated current: 30A Wiring size range: 10, 12 AWG contact resistance: contact material: silver plated copper insulation material: PA/pc warranty information 1-year material warranty.

More information about Renogy 5MC4


Similar products



Renogy Solar Panel Mounting Z Bracket Mount Supporting for RV, Roof, Boat, set of 4 Units

Renogy MTS-ZB - These units are ideal for installation on RV roofs & non-inhabited dwellings such as sheds or garages. Renogy mounting z brackets are very easy to use, unique designed, and perfect for irregular surfaces. This system makes the installation of small solar systems Easy, affordable & quick. These connectors are designed to complete a solar panel PV array, typically in parallel applications.

The system comes complete with all fasteners to secure the system to the installation surface. Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. All parts you need to mount your panels to roof/wall are included in this product.

Renogy Solar Panel Mounting Z Bracket Mount Supporting for RV, Roof, Boat, set of 4 Units - They are composed of aluminum material and are light weight. Use them to mount your panels to recreational vehicles or boats. Ideal for mounting 50W to 150W solar panels. Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA. Compatible with mc4 connectors Also known as MC4 T connectors.

This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. The renogy z-bracket mount system is designed to support the installation of single solar panel units, generally in off-grid installations.

More information about Renogy MTS-ZB


Similar products



Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors

TOOL-MC4 TOOL-MC4 - Renogy mc4 cable Connectors are made with highest quality materials. The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL.

This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. All parts you need to mount your panels to roof/wall are included in this product. They are composed of aluminum material and are light weight. Use them to mount your panels to recreational vehicles or boats.

Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors - Ideal for mounting 50W to 150W solar panels. Very handy for the assembly of custom Mc4 wires. These connectors are designed to complete a solar panel PV array, typically in parallel applications. Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA. Hard plastic. Renogy mounting z brackets are very easy to use, unique designed, and perfect for irregular surfaces.

These connectors are also waterproof and resist dust build up.

More information about TOOL-MC4 TOOL-MC4


Similar products



Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat

Link Solar #201809213LS - For breaking connections after they have already been locked together. One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. Contact material: copper, silver plated Flame Class: UL94-V0 or UL94-5VA. Suitable for most round cables for Solar Panel, Aerial, satellite, DC power, Air conditioning, Lighting etc.

Can be fixed with glue not included sikaflex 221 Sikaflex 252, dicor sealant, 291, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc. The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. All parts you need to mount your panels to roof/wall are included in this product.

Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat - They are composed of aluminum material and are light weight. Use them to mount your panels to recreational vehicles or boats. Ideal for mounting 50W to 150W solar panels. Very handy for the assembly of custom Mc4 wires. Link solar abs solar cable entry gland is used for the passing of cables into the Motorhome, from the Solar panel, or for use on yachts /boats for cable entry from the mast.

It can also be used for other installations and structures such as buildings, garages, sheds and other roofs Manufactured by Link Solar Compatible with mc4 connectors Also known as MC4 T connectors. Hard plastic. Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA.

More information about Link Solar #201809213LS


Similar products



Renogy 20Ft 10 AWG Solar Panel and Controller Connector Adaptor Wire MC4 Extension Cables

Renogy AK-20FT-10 - The adaptor kit includes mc4 connectors on one end for effortless connection to the solar panel, and exposed wire on the other end to lead directly into the charge controller. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions.

This wiring kit is essential for off-grid solar installations, roof or ground level, and is offered in a wide range of sizes. This wiring kit is ideal for Renogy Off-Grid Kits ranging from 100W to 400W. The wiring is weatherproof and designed to withstand extreme heat and cold. All parts you need to mount your panels to roof/wall are included in this product.

Renogy 20Ft 10 AWG Solar Panel and Controller Connector Adaptor Wire MC4 Extension Cables - They are composed of aluminum material and are light weight. Use them to mount your panels to recreational vehicles or boats. Ideal for mounting 50W to 150W solar panels. Very handy for the assembly of custom Mc4 wires. Hard plastic. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc.

Two cables with hard plastic MC4 connecters at one end and bare on the other end male and female. Black wire sunlight resistant cable, extends and locks built-in cables.

More information about Renogy AK-20FT-10


Similar products



Renogy 30 30A MC4 Waterproof in-Line Holder w/Fuse, Black

Renogy 30 A - Description unplugging under load: PV plug connections must not be unplugged while under load. Warranty information 1-year material warranty. They can be placed in a no load state by switching off the DC/AC converter or breaking the AC circuit Interrupter. Plugging & unplugging while under voltage is permitted.

Disconnected connectors should be protected from dirt & water with sealing caps.

More information about Renogy 30 A


Similar products



BougeRV 20 Feet 10AWG Solar Extension Cable with MC4 Female and Male Connector Solar Panel Adaptor Kit Tool 20FT Red + 20FT Black

BougeRV ISE004 - Made with copper. Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C. Using large diameter cable minimizes power loss in your solar panel system. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions.

Extends and locks built-in cables. Two cables with mc4 connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller. The wiring is weatherproof and designed to withstand extreme heat and cold. Solar panel cable is typically sold in 14, 12 and 10 awg sizes. These connectors are also waterproof and resist dust build up.

BougeRV 20 Feet 10AWG Solar Extension Cable with MC4 Female and Male Connector Solar Panel Adaptor Kit Tool 20FT Red + 20FT Black - Specifications: length: 20 feet one pair Wire Gauge: 10AWG Rating Voltage: -DC :1. 8kv -ac: 06~1kv degree of protection: ip65 fire rated: iec60332-1 temperature: -40~﹢90℃ Normal Cross Sectional Area of the Conductor mm2: 6. 0 service life: >25 years( -40~﹢90℃) package included: one pair 1 piece black + 1 piece red 20 Feet 10AWG MC4 CableNoteOnly one end has an mc4 connector, which convenient for you to cut cable to adjustment length Compatible with mc4 connectors Also known as MC4 T connectors.

The solar panel cable offered in this listing is 10 AWG which is the largest diameter of the three. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables.

More information about BougeRV ISE004


Similar products



Renogy BT-1 Bluetooth Module Solar Charge Controller Wireless monitor PV System

Renogy RNG-CTRL-BT-1 - Embedded exclusive Bluetooth chip with high efficiency and low energy consumption. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. Powered directly through RJ12 communication port and Signal range is up to 50 ft. Renogy mc4 cable Connectors are made with highest quality materials.

Please note that the bluetooth app, Renogy BT, is optimized for Rover Charge Controllers from version 010407 and onwards i. E. 100% compatible with Renogy MC4 connectors. Available for smartphones and tablets, Renogy BT allows for remote monitoring and parameter changes directly via the app. The solar panel cable offered in this listing is 10 AWG which is the largest diameter of the three.

Renogy BT-1 Bluetooth Module Solar Charge Controller Wireless monitor PV System - All parts you need to mount your panels to roof/wall are included in this product. They are composed of aluminum material and are light weight. Use them to mount your panels to recreational vehicles or boats. Ideal for mounting 50W to 150W solar panels. Very handy for the assembly of custom Mc4 wires. 0 and ble technology, it features fast and uninterrupted communication.

More information about Renogy RNG-CTRL-BT-1


Similar products



Renogy 1000W 12VDC to 120VAC Pure Sine Wave Inverter with Power Saving Mode, Home Car RV Solar Power Converter

- For breaking connections after they have already been locked together. Using large diameter cable minimizes power loss in your solar panel system. Wirelessly monitor and control compatible solar charge controllers via Bluetooth. Embedded exclusive Bluetooth chip with high efficiency and low energy consumption.

One ffm; one mmf withstanding voltage: 1000V DCTUV, 600VUL. Renogy mounting z brackets are very easy to use, unique designed, and perfect for irregular surfaces. Connect to user-friendly smartphone app, Renogy BT, to keep track of your system. Renogy 1000w power inverter 12vdc to 120vac pure sine wave with Power Saving Mode and special LED indicators.

Renogy 1000W 12VDC to 120VAC Pure Sine Wave Inverter with Power Saving Mode, Home Car RV Solar Power Converter - With bluetooth 4. 100% compatible with Renogy MC4 connectors. Powered directly through RJ12 communication port and Signal range is up to 50 ft. 0 and ble technology, it features fast and uninterrupted communication. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables.

Protection degree: ip67, mated unmating Force: 200 Newton Insulation Material: PC/PA. The new renogy 1000w pure sine wave power Inverter transforms the DC power stored in batteries into standard household AC power for consumer electronic needs. Extends and locks built-in cables.

More information about


Similar products