SMAKN® Voltage Transformer Module Active Single Phase Voltage Sensor Module AC output

SMAKN 2699028942 - Onboard precision miniature voltage transformer. Our aim is to provide top Level Customer Service, so we will try our best to solve any problem. Thank you very much! Onboard precision miniature voltage transformer. Parameter: *pCB board size: 49. 5 mm x19. 4 mm. Feedback: we greatly appreciate your POSITIVE feedback.

Onboard high precision op-amp circuit, the signal is accurately sampling and appropriate compensation, and other functions. Shipping list: *the active phase AC output voltage transformer module x 1. Onboard high precision op-amp circuit, the signal is accurately sampling and appropriate compensation, and other functions.

SMAKN® Voltage Transformer Module Active Single Phase Voltage Sensor Module AC output - Please do not leave negative feedback without asking for help. Modules can be measured within 250V AC voltage, the corresponding analog output can be adjusted. Modules can be measured within 250V AC voltage, the corresponding analog output can be adjusted. Pcb board size: 49. 5 mm x19. 4 mm. Weight:19g.

More information about SMAKN 2699028942

JANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer for Arduino Raspberry pi

JANSANE - This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation. This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi. Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.

Input current: 0~100a ac; length of leading wire: 1m; two form of Output: current output or voltage output burden resistor needed to add; Cable Jack: 3. 5mm like a headphone jack. Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection. Specification model: sct-013-000 type: non-invasive current transformer core material: ferrite input current: 0~100a ac output mode: 0~50ma leading wire in length: 1m turns ratio: 1: 1800 work voltage: 660 v Resistance Grade: Grade B Max Sampling Resistance: 10 Ω Linearity: ±3% Accurancy: ±1% Work Frequency: 50-1 KHz Work Temperature: -25˚C ~ 70˚C Reference project: Open Energy Monitor Dielectric Strength: 6000V AC/1min Opening Size: 0

JANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer for Arduino Raspberry pi - 51 * 051inch / 13 x 13mm two form of output: current output or voltage output a burden resistor needed to add; mechanical strength: opening and closing times, no less than 1000 times 20 ℃ High Quality and Safe: Meet the requirement of flame-retardant characteristics UL94-V0 100% Satisfaction Guarantee 12-Month Warranty; No satisfied, Free reason for return; We could also resend you new one due to quality problem.

More information about JANSANE


Similar products



CTYRZCH SCT-013-000 Non-invasive AC Current Sensor Split Core Transformer 100A

CTYRZCH - 1. 5m leading wire, Φ3. 5 3 core plug standard output. Two form of output current, voltage voltage output built-in the sampling resistor. Operating temperature: -25 C ~ +70 C. Non-linearity 3%10%-120% rated input current. Core material: ferrite mechanical strength: opening and closing times, no less than 1000 times 20 c Safety indicators: Dielectric strength 6000V AC/1min Meet UL94-V0 flame retardant properties Operating Temperature: -25 C ~ +70 C Applications: for AC motors, lighting equipment, air compressors and other current measurement, monitoring and protection.

. Package include: 1 x split core current transformer SCT-013-000 This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation. This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi.

CTYRZCH SCT-013-000 Non-invasive AC Current Sensor Split Core Transformer 100A - Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load. Input current: 0~100a ac; length of leading wire: 1m; two form of Output: current output or voltage output burden resistor needed to add; Cable Jack: 3.

5mm like a headphone jack. Suitable for lighting equipment, monitoring, air compressors, AC motors, current measurement and over-current protection. Opening size:13mmx13mm.

More information about CTYRZCH


Similar products



2 X 30A range Current Sensor ACS712 Module

NewZoll 2699029384 - Pin 5v power supply, on-board power indicator. Pin 5v power supply, on-board power indicator. 30a range current Sensor Module. Output : 100mV/A. Size : 31 x 13mm. 1. 5m leading wire, Φ3. 5 3 core plug standard output. Two form of output current, voltage voltage output built-in the sampling resistor. Operating temperature: -25 C ~ +70 C.

Package included: 2 x 30a range current sensor Module ACS712 This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation. This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi. Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.

2 X 30A range Current Sensor ACS712 Module - Input current: 0~100a ac; length of leading wire: 1m; two form of Output: current output or voltage output burden resistor needed to add; Cable Jack: 3. 5mm like a headphone jack. Suitable for lighting equipment, air compressors, AC motors, monitoring, current measurement and over-current protection. Opening size:13mmx13mm.

Specification:current sensor chips: ACS712ELC-30A. Non-linearity 3%10%-120% rated input current.

More information about NewZoll 2699029384


Similar products



3.5mm Stereo Female terminal block panel mount connector 2 pack

KINGDEE INC 6543851416 - 3. 5mm stereo female terminal block bring all 3 pins out to screw terminal blocks for easy connection and prototyping work. Output : 100mV/A. Tuv certificated 3. 81mm pitch terminal blocks provide reliable connections with cables. Used to add a 3. 5mm port where field termination is required. This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation.

This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi. Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load. Input current: 0~100a ac; length of leading wire: 1m; two form of Output: current output or voltage output burden resistor needed to add; Cable Jack: 3.

3.5mm Stereo Female terminal block panel mount connector 2 pack - 5mm like a headphone jack. Suitable for lighting equipment, air compressors, AC motors, monitoring, current measurement and over-current protection. Opening size:13mmx13mm. Requires only a standard screw driver to install. Pin 5v power supply, on-board power indicator. 3.

More information about KINGDEE INC 6543851416


Similar products



SCT-013-000 Non-invasive AC Current Sensor Split Core Transformer 100A

CTYRZCH - 30a range current Sensor Module. Opening size: 13mm * 13mm, non-linearity 3%10%-120% rated input current. Fits for ac motors, air compressors and other current measurements, lighting equipment, monitoring and protection. Output : 100mV/A. Non-linearity 3%10%-120% rated input current. Tuv certificated 3. 81mm pitch terminal blocks provide reliable connections with cables.

Requires only a standard screw driver to install. Used to add a 3. 5mm port where field termination is required. Clearly marked terminal block provides fast and easy termination. Two form of output current, voltage voltage output built-in the sampling resistor. Pin 5v power supply, on-board power indicator. Specification: model: sct-013-000 type: non-invasive current transformer core material: ferrite input current: 0~100a ac output mode: 0~50ma leading wire in length: 1m turns ratio: 1: 1800 work voltage: 660 v Resistance Grade: Grade B Max Sampling Resistance: 10 Ω Linearity: ±3% Accurancy: ±1% Work Frequency: 50-1 KHz Work Temperature: -25˚C ~ 70˚C Reference project: Open Energy Monitor Dielectric Strength: 6000V AC/1min Opening Size: 0

SCT-013-000 Non-invasive AC Current Sensor Split Core Transformer 100A - 51 * 051inch / 13 x 13mm two form of output: current output or voltage output a burden resistor needed to add; Mechanical strength: opening and closing times, lighting equipment, no less than 1000 times 20 ℃ High Quality and Safe: Meet the requirement of flame-retardant characteristics UL94-V0 Applications: For AC motors, air compressors and other current measurement, monitoring and protection.

More information about CTYRZCH


Similar products



SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield for Arduino Uno Mega2560

SunFounder - It's in elegant blue with white contents displayed. 1. 5m leading wire, Φ3. 5 3 core plug standard output. Two form of output current, voltage voltage output built-in the sampling resistor. Operating temperature: -25 C ~ +70 C. Non-linearity 3%10%-120% rated input current. Therefore, this is a perfect choice to make your project more interesting and vivid! For more information, refer to https://www.

Sunfounder. Com/wiki/index. Php?title=i2c_lcd2004 package included 1 x i2c/iic lcd2004 Module This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation. This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi.

SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield for Arduino Uno Mega2560 - Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load. Input current: 0~100a ac; length of leading wire: 1m; two form of Output: current output or voltage output burden resistor needed to add; Cable Jack: 3.

5mm like a headphone jack. Suitable for lighting equipment, AC motors, monitoring, air compressors, current measurement and over-current protection. Opening size:13mmx13mm. Output : 100mV/A.

More information about SunFounder


Similar products



Current Transformer, DROK 100A/100mA AC Current Transformers, Mini Clip-on Current Sensor, Split Core Amp Transformer Sensing Relay, Easy to Install CT without Power Off

DROK 200072 - The secondary circuit is not allowed open circuit, so please do not install a fuse. This is a mini split base current transformer; it's the smallest one compared to the similar products output 100MA. The diameter of inner hole is 16mm, the accuracy is ≤05 grade,. The ct primary should be connected in series with the test current loop, the secondary should be as work in the short-circuit state 2.

Size : 31 x 13mm. Requires only a standard screw driver to install. 1. 5m leading wire, Φ3. 5 3 core plug standard output. Two form of output current, voltage voltage output built-in the sampling resistor. Operating temperature: -25 C ~ +70 C. Package including: 1x current Transformer This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation.

Current Transformer, DROK 100A/100mA AC Current Transformers, Mini Clip-on Current Sensor, Split Core Amp Transformer Sensing Relay, Easy to Install CT without Power Off - This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi. Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load. Input current: 0~100a ac; length of leading wire: 1m; two form of Output: current output or voltage output burden resistor needed to add; Cable Jack: 3.

5mm like a headphone jack.

More information about DROK 200072


Similar products



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

Elegoo EL-CP-004 - Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation. This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi.

Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load. Input current: 0~100a ac; length of leading wire: 1m; two form of Output: current output or voltage output burden resistor needed to add; Cable Jack: 3.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino - 5mm like a headphone jack. Suitable for lighting equipment, AC motors, monitoring, air compressors, current measurement and over-current protection. Opening size:13mmx13mm. So we can control the quality of our productions by ourselves for you. Packing in a color box. We have always cared about the customer experience and improve the product function details.

Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Fits for ac motors, lighting equipment, air compressors and other current measurements, monitoring and protection.

More information about Elegoo EL-CP-004


Similar products



SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

SunFounder NA - It can be controlled directly by microcontrollerarduino, AVR, 8051, Raspberry Pi, ARM, MSP430, DSP, PIC, TTL logic. Our ac sensing relay using snap joint structure, it can be fixed to the cable directly through nylon ties. The amp transformer is with Built-in input coil; small and light, easy to install.

Fully enclosed ct, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability. Each cable length: about 20 cm /8-inch. Http://wiki. Sunfounder. Cc/index. Php?title=i2c_LCD2004. Output : 100mV/A. Pin 5v power supply, on-board power indicator. Tuv certificated 3.

SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi - 81mm pitch terminal blocks provide reliable connections with cables. Non-linearity 3%10%-120% rated input current. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Two form of output current, voltage voltage output built-in the sampling resistor.

Fits for ac motors, lighting equipment, air compressors and other current measurements, monitoring and protection.

More information about SunFounder NA


Similar products



WINGONEER 5PCS Max 25V Voltage Detector Range 3 Terminal Sensor Module for Arduino

WINGONEER - Max voltage Range: 25V. Used to add a 3. 5mm port where field termination is required. Opening size: 13mm * 13mm, non-linearity 3%10%-120% rated input current. Arduino avr chips have 10-bit AD, so this module simulates a resolution of 000489v 5v/1023, so the minimum voltage of input voltage detection module is 0

00489vx5=002445v. Voltage input range : dC0-25 VVoltage detection range : DC002445 v-25 vvoltage analog resolution : 000489 voutput interface : ""+ "" connected 5/3. 3v, connect this module with the expansion of board arduino, ""-"" connected gnd, not only makes it easier for you to detect voltage battery, ""s"" connected Arduino AD pinsDC input interface : red terminal positive with VCC, negative with GNDBy 3P connector, can also use the IICLCD1602 LCD to display voltage.

WINGONEER 5PCS Max 25V Voltage Detector Range 3 Terminal Sensor Module for Arduino - Package includes 5 x standard voltage Sensor Module For Robot This ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation. This split core transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi. Use this split core current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.

Input current: 0~100a ac; length of leading wire: 1m; two form of Output: current output or voltage output burden resistor needed to add; Cable Jack: 3. 5mm like a headphone jack.

More information about WINGONEER


Similar products