Top 9 2006 Jeep Commander LIFT Kit – Automobile Chassis Body & Suspension Lift Kits

As an Amazon Associate I earn from qualifying purchases.

1. Takeo Engineering

#ad

Takeo Front 2.0" Leveling Lift Kit Fits Jeep Grand Cherokee/Commander 2005-2010 WK 4WD 4x4 2WD 4x2

#ad
Takeo Engineering #ad - Featureimproved look and enough ride height clearance to run up to 265/70 R17. Contents2x front Strut Coil Spring Suspension Lift Spacers. Installationeasy installation takes 2-3 hours; alignment is recommended after installed. Fitmentfits for jeep wk commander / grand cherokee 2wd 4x2 4wd 4x4 2005 2006 2007 2008 2009 2010 . Notefront spacer is 1. 5" thick, it will lift the body front end 2. 0" tall after installed.
BrandTakeo Engineering #ad
ManufacturerTakeo Engineering #ad
Weight10 Pounds
Part NumberTE-J-JC0610F

2. Supreme Suspensions

#ad

For Jeep Commander XK Grand Cherokee WK Lift Leveling Kit 3.5" Front Fork Clevis + 2" Rear Spring Spacers High Strength Carbon Steel 4x2 4x4 Black Pro, Supreme Suspensions

#ad
Supreme Suspensions #ad - Installation: easy 'bolt-on' installation takes 2 - 4 hours. For: 2005 - 2010 jeep commander xk 2wd 4wd and 2005 - 2010 jeep Grand Cherokee WK 2WD 4WD. Technical notes: 3. 5 inch front and 2 inch rear suspension lift. Contents: 2x carbon steel front strut forks, Installation Hardware, 2x Carbon Steel Rear Spring Spacers, Installation Instructions and Pro Pack. Benefits: improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM 503(555.1B)(pro)

3. Daystar

#ad

Fits Commander and WK 2005 to 2010 2/4WD, Daystar, KJ09132BK, Black, all transmissions, Jeep Grand Cherokee WK 2" Lift Kit

#ad
Daystar #ad - Includes front upper strut plates, sway bar bushings, bump stops and shock boots. Designed to improve ground clearance. Facilitate easy installation. Enhance the performance of the vehicle. Made from high density polyurethane.
BrandDaystar #ad
ManufacturerDaystar #ad
Height8 Inches
Length12 Inches
Weight6.61 Pounds
Width8 Inches
Part NumberKJ09132BK
ModelKJ09132BK
WarrantyLimited Lifetime Warranty - Parts Only

4. Air Lift

#ad

AIR LIFT 25592 Load Controller II On Board Air Compressor System

#ad
Air Lift #ad - Levels vehicles Side to side. Comes with new wiring harness. Easier and faster installation. Ready air supply. 5 psi low pressure sensor.
BrandAir Lift #ad
ManufacturerAIR LIFT COMPANY #ad
Height0 Inches
Length0 Inches
Weight4.59 Pounds
Width0 Inches
Part Number25592
Model25592

5. Supreme Suspensions

#ad

Supreme Suspensions, for Jeep Commander XK Lift Leveling Kit 3.5" Front Fork Clevis Set High Strength Carbon Steel 4x2 4x4 Black Pro

#ad
Supreme Suspensions #ad - Contents: 2x carbon steel strut Forks, Installation Hardware, Installation Instructions and Pro Pack. Installation: easy 'bolt-on' installation takes 1 - 2 hours. For: 2006 - 2010 jeep commander XK 2WD 4WD. Technical notes: 3. 5 inch front suspension lift. Benefits: improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM 503(pro)

6. Air Lift

#ad

AIR LIFT 25812 Load Controller II Air Compressor System

#ad
Air Lift #ad - 5 psi low pressure sensor. Ready air supple. Easier and faster installation. Comes with new wiring harness. Levels vehicle side to side.
BrandAir Lift #ad
ManufacturerAIR LIFT COMPANY #ad
Height0 Inches
Length0 Inches
Weight0.38 Pounds
Width0 Inches
Part Number25812
Model25812

7. Air Lift

#ad

AIR LIFT 60811 1000 Series Rear Air Spring Kit

#ad
Air Lift #ad - Up to 1000 pounds of leveling capacity. Installs inside coil spring to eliminate sag and bottoming out. Easy to install with included instructions. Rugged durable components including air springs and all hardware. Fully adjustable air springs level your vehicle when towing or hauling a heavy load for a safe comfortable ride.
BrandAir Lift #ad
ManufacturerAir Lift #ad
Height0 Inches
Length0 Inches
Weight2.7 Pounds
Width0 Inches
Part Number60811
Model60811
WarrantyLimited Lifetime Warranty (parts)

8. SUPERLIFT

#ad

Superlift 5152 Component Box For PNK863/K863R/K864/K864R

#ad
SUPERLIFT #ad - Item package Weight : 29 pounds. Model number : 5152. Package dimension : 33 " l x 13 " W x 7. 5 " h. Country of origin: uNITED STATES.
BrandSUPERLIFT #ad
ManufacturerSuperlift #ad
Height7.5 Inches
Length33 Inches
Weight7.5 Pounds
Width13 Inches
Part Number5152
Model5152

9. Air Lift

#ad

AIR LIFT 25690 Quick Shot Air Compressor System

#ad
Air Lift #ad - Rugged compressor and reserve tank move air faster. Convenient auxilliary air line makes it easy to adjust tires or fill air toys. Includes compressor tank wiring harness and gauge. Single path system inflates two air springs at the same rate at the same time. In dash control panel for easy monitoring and adjustment of air springs.
BrandAir Lift #ad
ManufacturerAir Lift #ad
Height0 Inches
Length0 Inches
Weight0 Pounds
Width0 Inches
Part Number25690
Model25690
Warranty2 Years

Top 10 Synergy Tie Rod – Automotive Replacement Tie Rod Ends

As an Amazon Associate I earn from qualifying purchases.

1. Synergy Manufacturing

#ad

Synergy Jeep JK Heat Treated Tie Rod 8002

#ad
Synergy Manufacturing #ad - Strongest jeep JK Tie Rod on the market! Made from 1 3/8" 4130 chromoly and heat Treated for maximum strength - 200% stronger than stock tie rod. Bent similar to factory bar to clear sway bar mounts. Synergy double adjuster Sleeve: allows adjustment of tie rod length without removing it from the vehicle. Heavy duty tie rod for Jeep JK Wranglers.
BrandSynergy Manufacturing #ad
ManufacturerSynergy Manufacturing #ad
Height3 Inches
Length62 Inches
Weight15.85 Pounds
Width6 Inches
Part Number8002
Model8002

2. Synergy Manufacturing

#ad

Synergy Manufacturing 4131-L Tie Rod End

#ad
Synergy Manufacturing #ad - Fully greasable sintered metal on metal bushing design has high wear resistance. Two are required for Synergy 8001 and 8002. Note: these only work with Synergy Manufacturing Steering. Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface. Boots are made from tear/wear resistant black NBR and come with retaining springs.
BrandSynergy Manufacturing #ad
ManufacturerSynergy Manufacturing #ad
Height5 Inches
Length7 Inches
Width5 Inches
Part Number4131-L
Model4131-L

3. Synergy Manufacturing

#ad

JL/JLU/JT Steering Stabilizer Relocation Kit by Synergy MFG 1 1/2" Dia. Synergy Tie Rod

#ad
Synergy Manufacturing #ad - 1. 5 inch clamp for attaching stabilizer to the Synergy JL Tie Rod. Replaces axle side track bar mounting bolt. Required when using synergy 8802-01 JL Tie Rod to mount a steering stabilizer. Low profile stabilizer mounting stud prevents interference with Synergy upgraded steering components.
BrandSynergy Manufacturing #ad
ManufacturerSynergy Manufacturing #ad
Part NumberJL/JLU/JT SS Relocation Kit

4. Synergy Manufacturing

#ad

13+ 3500 4x4, Synergy Manufacturing 8702-01 Heavy Duty Tie Rod RAM Truck 14+ 2500 4x4

#ad
Synergy Manufacturing #ad - Fits: ram truck 14+ 2500 4x4, 13+ 3500 4x4. Over 40% stronger than the stock tie rod. Steering stabilizer Clamp 8703-01 required to retain steering stabilizer. Tie rod bolts right into the factory mounts with no additional wheel requirements. Tie rod is cnc formed from 1. 75 inch x. 188 wall seamless chromoly tubing and heat treated after forming.
BrandSynergy Manufacturing #ad
ManufacturerSynergy Manufacturing #ad
Part NumberSYN-8702-01

5. Southwest Speed

#ad

2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018, NEW CURRIE CURRECTLYNC STEERING SYSTEM,COMPATIBLE WITH 07-18 JEEP WRANGLER JK,DRAG LINK,TIE ROD

#ad
Southwest Speed #ad - This kit is completely bolt-on and includes a heavy duty steering stabilizer shock mounting kit. The currie currectlync steering system for the jeep jk wrangler features a 1 1/2" diameter tube tie rod, 1 1/2" diameter solid forged drag link, forged tie rod ends and premium jam nuts & adjuster. Brand new currie jeep wrangler JK Currectlync Steering System Part #JK-9704. Fits: 2007-2018 jeep Wrangler JK.
BrandSouthwest Speed #ad
ManufacturerCurrie Enterprises #ad
Part NumberCUR-JK-9704

6. MOOG Chassis Products

#ad

Moog ES800223 Tie Rod End

#ad
MOOG Chassis Products #ad - Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. Rigorous testing -- comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on.

Greaseable socket -- reduces corrosion and wear by allowing new lubricant to flush contaminants. Comprehensive coverage -- available for foreign and domestic nameplates. Absorbs impact -- belleville preload washer helps keep the bearing package tight as bearings wear. Problem solver gusher bearing -- metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.

Strong and durable – ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. Restores like-new steering -- patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life.
BrandMOOG Chassis Products #ad
ManufacturerFederal Mogul #ad
Height2.8 Inches
Length9.8 Inches
Weight1 Pounds
Width4.6 Inches
Part NumberES800223
ModelES800223
WarrantyLimited Warranty

7. MOOG Chassis Products

#ad

Moog ES3609 Tie Rod End

#ad
MOOG Chassis Products #ad - Restores like-new steering -- patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life. Fits select 2000 - 2003 Chevy. Absorbs impact -- belleville preload washer helps keep the bearing package tight as bearings wear.

Problem solver gusher bearing -- metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life. Outer rod. Rods are greasable to reduce friction. Made of durable, all metal construction. Strong and durable – ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.

Greaseable socket -- reduces corrosion and wear by allowing new lubricant to flush contaminants. Rigorous testing -- comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on. Easy to install. Comprehensive coverage -- available for foreign and domestic nameplates.
BrandMOOG Chassis Products #ad
ManufacturerFederal Mogul #ad
Height2.63 Inches
Length9.75 Inches
Weight1.73 Pounds
Width4.5 Inches
Part NumberES3609
ModelES3609

8. Supreme Suspensions

#ad

Carbon Steel Adjustable Tie Rod for 2007-2018 Jeep Wrangler, Supreme Suspensions

#ad
Supreme Suspensions #ad - Technical notes: Corrects and Prevents Oscillation In The Driveline. Contents: 1x carbon Steel Adjustable Tie Rod and Installation Instructions.

For proper use, 4-1/2" wheel back spacing or less is recommended. Fitment: 2007 - 2018 jeep wrangler JK 2WD 4WD. Benefits: replaces your worn out tie rod with our superior carbon steel tie rod. Carbon steel is used due to its higher strength, durability and resistance to bending. Aftermarket wheel spacers can help solve this problem, especially on factory wheels. Installation: easy bolt-on installation takes 1 to 2 hours. Your wheels must not have more than 4-3/4" backspace or the Tie Rod can come in contact with the wheels.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM T92

9. MOOG Chassis Products

#ad

MOOG Chassis Products ES3488 Tie Rod End

#ad
MOOG Chassis Products #ad - Rods are greasable to reduce friction. Easy to install. Wrench flats on housing and stud provide easy installation and alignment adjustment. Loose or worn chassis parts can lead to premature tire wear. Stud design is optimized to provide ideal stud swing and strength for each application. Fits 1999 - 2001 Silverado trucks. Assembled in the USA. Made of durable, all metal construction. Engineered to meet or exceed OE part performance.
BrandMOOG Chassis Products #ad
ManufacturerFederal Mogul #ad
Height1.8 Inches
Length0.6 Inches
Weight1.45 Pounds
Width1.2 Inches
Part NumberES3488
ModelES3488
WarrantyLimited Warranty

10. Fox

#ad

Fox Racing 983-02-070 2.0 Performance ATS Steering Stabilizer 07-16 Jeep Wrangler Stock & 1 3/8" Tie Rod

#ad
Fox #ad - Zinc-plated and double-clear Coated for long lasting finish. 2. 0" smooth bore and honed seamless alloy Bodies. Race-developed High-Flow piston design.
BrandFox #ad
ManufacturerFox #ad
Height40.1 Inches
Length2.75 Inches
Weight5 Pounds
Width5.75 Inches
Part Number983-02-070
Model983-02-070

Top 9 Spacers for rims – Wheel Adapters & Spacers

As an Amazon Associate I earn from qualifying purchases.

1. ECCPP

#ad

ECCPP 5 lug Hub Centric Wheel Spacer Adapters 1.25 inch 5x4.5 to 5x5 71.5mm CB Fits for Jeep Grand Cherokee Jeep Cherokee Jeep Wrangler JK TJ YJ2X 1/2"x20 Studs

#ad
ECCPP #ad - Note:required that you recheck your vehicle compatibility in Product Description BEFORE buying these wheel spacers 1. 25 inch. Safety:wheel spacers 5 lug made from the best true t-6 billet aluminum, with heat treated and hardened 109 grade bolts pre-installed. The anodized surface provides additional resistance to corrosion.

Exceptionally sturdy and lightweight compared to steel spacer. Fitments:the hub centric wheel spacers 5x4. 5 to 5x5 fit for 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 jeep cherokee 1986 1987 1988 1989 1990 1991 1992 jeep comache 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 jeep liberty 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Jeep Wrangler 1993 1994 1995 1996 1997 1998 Jeep Grand Cherokee.

Hubcentric:the 1. 25 wheel spacers 5 lug with hub-centric design with additional centering collar with perfect fit in mind makes the spacer function as a precise extension of the axle hub, ensuring precise wheel fitment while eliminating risks from vibration. Specifications:the spacers 5 lug hubcentric with thickness:1. 25" or 32mm;vehicle bolt pattern:5x4. 5 or 5x114. 3mm;wheel bolt pattern:5x5 or 5x127mm;Thread Pinch:1/2”x20;Inner Diameter:71. 5mm.
BrandECCPP #ad
ManufacturerECCPP #ad
Height4.3 Inches
Length7.3 Inches
Weight7.5 Pounds
Width7 Inches
Part Number992776-5211-1636001
Model5 lug wheel spacers adpaters

2. RockTrix

#ad

Silver 50mm 5x127 4pcs, RockTrix 2 inch Hubcentric 5x5 to 5x5 Wheel Spacers 71.5mm Bore, 07-18 Wrangler JK JKU, 1/2x20 Studs Compatible with Jeep 99-10 Grand Cherokee WJ WK, 06-10 Commander XK

#ad
RockTrix #ad - For your safety retorque all hardware after 25-50 miles. Hubcentric ridge sits perfectly over the wheel hub to eliminate wobble or vibrations. These tire spacers will not work if your automobile has any other stud/nut thread size. Specifications package: set of 4 parts | thickness: 2" 50mm wide | bolt pattern: 5/127 | hub center bore: 71.

5mm | stud/nut thread pitch: 05x20 | material and manufacturing: Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Installation hub-centric lip helps the wheel center properly. Verify using spec sheet. Fits on 2007-2018 jeep wrangler jk 2 door jku unlimited; 2006-2010 commander xk; 1999-2010 grand cherokee WJ WK; NOT COMPATIBLE with 2018+ Jeep Wrangler JL; May fit other vehicles. Comes with a 1 year warranty. While installation is simple and most knowledgeable buyers can install themselves, a torque wrench, we always recommend professional installation especially if it is your first time installing auto accessories.

Improves handling characteristics and stability with increased traction for the best performance. Product benefits gives your vehicles body a more aggressive stance and ensures exceptional wheel balance. Increases tire clearance to allow installation of 30, eliminates tire rub, 35 inch off-road mud setups, 33, and works well in conjunction with leveling lift kits.
BrandRockTrix #ad
ManufacturerPrecision European Motorwerks #ad
Height6 Inches
Length12 Inches
Weight19.96 Pounds
Width12 Inches
Part Number4x-50mm-5127-71.5

3. dynofit

#ad

Dynofit 5x4.5 20mm M12x1.5 64.1 Hubcentric Wheel Spacers for Honda CR-V HR-V Element Crosstour Accord, 4pcs 5x114.3 Solid Wheels Spacer for Acura RDX TLX CDX CSX ILX RSX TSX 5 Lug Rims and More

#ad
dynofit #ad - Fitment in description, Do not use system filter. Comes as pictured and packaged in padding box, enjoying 2 years warranty! contact us and reply in 24hs. Updated 6061-t6 air aluminum, automatic accurate process keep clear thread pitch and horizontal surface, 109 grade bolt, fit more Aggressive driving than other casting ones, easy installation and keep stock ride. Safe hub centric design with hard lip ring, tight contact and stable while hight speed or heavy duty, no shaking. Your hub bore must be 64. 1mm, studs thread must be 12x1. 5, 5 lug rims.
Branddynofit #ad
ManufacturerFastfree #ad
Part NumberFF-019BK
ModelFF-019BK

4. ATV Engineering

#ad

4 QTY ATV Wheel Spacers 4" 2 inch Per Side 4x110 bolt patterns, Fits Honda Yamaha Grizzly Rhino Wolverine Big Bear Kodiak Rancher Foreman TRX250 Recon TRX 250EX TRX300 400 300EX YFM 450 600 660 700

#ad
ATV Engineering #ad - Please confirm compatibility with your vehicle before purchasing. Wheel bolt pattern: 4x110 Usa cnc machined + high Performance Aerospace Grade Aluminum. Hub bore: 83. 97 mm. Thread pitch: M10-1. 25. Vehicle bolt Pattern: 4x110 .
BrandATV Engineering #ad
ManufacturerSmart Parts #ad
Weight3.13 Pounds
Part Number4-110-2-0-4QTY

5. ECCPP

#ad

ECCPP 4PCS Wheel Spacers Adapters 2" 6Lug 6x5.5 / 6x139.7 for 2000-2014 Cadillac Escalade Chevy Silverado Express Suburban 1500 Tahoe GMC Yukon XL Sierra 1500 with 14x1.5 Studs

#ad
ECCPP #ad - Designed to move the wheels further out from the hub, giving your vehicle a more aggressive stance & allows for better handling characteristics. Thickness 2" hub bore size 108mm bolt pattern 6x5. 5 to 6x5. 5 thread Pitch14x1. 5. Required that youcheck your vehicle compatibility in Product Description BEFORE buying.
BrandECCPP #ad
ManufacturerECCPP #ad
Height10.64 Inches
Length7.6 Inches
Width6.84 Inches
Part NumberECCPP07073401
ModelECCPP07073401

6. Supreme Suspensions

#ad

Supreme Suspensions, 4pc 2" Hub Centric Wheel Spacers for 2002-2011 Dodge Ram 1500 2WD 4WD 5x5.5" 5x139.7mm BP with 9/16"x18 Studs 77.9mm Center Bore w/Lip Black

#ad
Supreme Suspensions #ad - Installation: easy bolt-on installation takes just minutes with standard hand tools. Specifications: 2 inches thick, 5x5. 5" 5x139. 7mm bolt pattern, 9/16"x18 Studs, 77. 8mm hub centric Center Bore. Fitment: 2002 - 2011 dodge ram 1500 2wd + 4wd. Contents: 4pc aerospace-grade billet wheel Spacers with Precision-Machined Splined Studs, Installation Hardware, and Supreme Suspensions Pro Pack. Benefits: positions your wheels 2 inches outward to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance; pressed studs eliminate the risk of vibrations.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM ws11.3(2x)_blk_Ram1500

7. Rocky Mountain Bearings

#ad

4 Wheel Spacer Adapters to install Polaris RZR 1000 rims onto RZR S800 or 900XP

#ad
Rocky Mountain Bearings #ad - Made in the usa - 6061 t6 forged Billet - 12. 9 grade hardware. Fits polaris rzr 900 xp years 2011 2012 2013 - Lifetime Warranty. This kit will allow you to convert your polaris rzr s 800, rzr 4 800, rzr xp 900, rzr s, rzr 4 xp 900, and rzr xp 4 900 wheels to factory RZR 1000 Wheels and 29" tires plus add a 4" wider stance!!! Each Spacer adds 2" of width each side for a total of 4"!!!. Fits polaris rzr s 800 and rzr 4 800 years - 2009 2010 2011 2012 2013 2014. Fits rzr 800 2010 2011 2012 2013 2014 - fits 2012 rzr xp 4 900 years 2012 2013 - fits Polaris RZR S 2009.
BrandRocky Mountain Bearings #ad
ManufacturerGAICL #ad
Height2.9 Inches
Length7.5 Inches
Width7.5 Inches
Part NumberRMBWS-005-1
WarrantyLifetime warranty One Time Replacement

8. KSP PERFORMANCE

#ad

KSP 6X5.5 Blue Wheel Spacers 1 Inch Fit for Toyota,M12x1.5 Thread 108mm Hub Bore Wheel Adapters for Tacoma 4WD,1984-2018 4Runner,2000-2006 Tundra,2007-2018 FJ Cruiser

#ad
KSP PERFORMANCE #ad - Warranty:30-day refund and 24-momth free replacemwnt. If you have any question, pleast feel free contact us firstly:. Ksp 1" wheel spacers: 6x5.

5"6x139. 7mm wheel bolt pattern, M12x1. 5 thread pitch, compatible with 98-108mm hub bore, 4 Pcs with color box packing. Easy installation:taper seat of the bottom makes spacers fit the hub perfectly, reducing vibration in a high speed and installing easier. Fitment:fit for most toyota lexus hyundai with 6-lug wheels. More detail please refer to the description or click the "Check Fit" button to see if it fitsThe upper left corner. Build quality: forged by aircraft-grade solid aluminum, heavy duty than casting;with 12. 9 grade bolts, not easy to break/crack or rustproof.
BrandKSP PERFORMANCE #ad
Manufacturergoldenlion #ad
Part Number100-6550550-1081215K-009BL

9. Goplus

#ad

Goplus 4PC 2" 6x5.5 Wheel Spacer Adapters for 2003-2012 Cadillac Escalade GMC Silverado Tahoe Suburbam Chevy Sierra Savana 1500 Yukon, Black 6 Lug Black

#ad
Goplus #ad - Wheel bolt pattern: 6x5. 5 inch / 50 mm. Center Bore: 4. 25 inches / 108mms. Wheel spacer 6 lug safetymade from high quality aviation aluminum alloy. And exceptionally sturdy and lightweight compared to steel spacer.

Vehicle bolt Pattern: 6x5. 5 inch / 6x139. 7 mm. Please attentionrequired that you recheck your vehicle compatibility in Product Description BEFORE buying, if you have no ideas, please mail us for help. Wheel spacers 2 inch advantagedesigned to move the wheels further out from the hub, fix brake caliper clearance issues, giving your vehicle a more aggressive stance and allows for better handling characteristics.

They also increase tire clearance, allow installation of lift/lowering kits and wider, larger, or high traction tires. Thread size: 14x1. 5mm. 2 wheel spacers 6x5. 5 fitmentfits for silverado, Cadillac, GMC, it comes with everything you need for a complete installation!. Wheel spacer 6x5. 5 parameterthickness:2 inches / 6x139. 7 mm. 4pcs wheel spacers Included.
BrandGoplus #ad
ManufacturerSuperbuy #ad
Weight18.17 Pounds
Part NumberGP-101040175
Modelwheel spacers