Top 10 14mm Hex Socket 1/2 Drive – Square Drive Sockets

As an Amazon Associate I earn from qualifying purchases.

1. Capri Tools

#ad

1/2-Inch Drive, Capri Tools 3-0544 14 mm Hex Bit Socket, Metric

#adCapri Tools #ad - Premium chrome vanadium steel sockets plated with our SmartKrome protective plating are durable and corrosion resistant. These s2 steel bits withstand high torque and do not twist, protecting both the bit and the fastener. Single 1/2 in. Made for the most demanding professionals, each of our bit sockets is made from custom forged premium steel that underwent proprietary heat treatment and precisely machined to perform in toughest situations. Premium s2 steel forged bits are exceptionally strong and durable. Drive, 14 mm hex bit socket. Chamfered end to ensure a smooth fit onto fasteners.

Brand	Capri Tools #ad
Manufacturer	Capri Tools #ad
Height	2.2 Inches
Length	0.95 Inches
Weight	0.24 Pounds
Width	0.95 Inches
Part Number	3-0544
Model	3-0544
Warranty	Lifetime Warranty

2. TEKTON

#ad

TEKTON 1/2 Inch Drive x 14 mm Hex Impact Bit Socket | SIB23214

#adTEKTON #ad - Two-piece design allows bit and socket to be optimized seperately, for a more durable tool than traditional one-piece designs. Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off. Exposed bit Length: 1. 5 inches. 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners. Overall length: 2. 95 inches.

Brand	TEKTON #ad
Manufacturer	TEKTON #ad
Height	1.1 Inches
Length	3 Inches
Weight	0.38 Pounds
Width	1.1 Inches
Part Number	SIB23214
Model	SIB23214
Warranty	No time limits, no receipts: tekton. Com/tool-help.

3. Sunex Tools

#ad

Sunex 26497 1/2-Inch Drive 14-mm Hex Impact Socket

#adSunex Tools #ad - Sunex give you the power to make an impact on stubborn fasteners. Cr-mo alloy steel for long life. 14mm hex driver impact socket. 1/2-inch drive. Lifetime warranty.

Brand	Sunex Tools #ad
Manufacturer	Sunex International #ad
Height	1 Inches
Length	3 Inches
Weight	0.3 Pounds
Width	1 Inches
Part Number	26497
Model	26497

4. Neiko

#ad

Neiko 02476A 1/2" Drive Deep Impact Socket Set, 14 Piece | 6 Point Standard SAE Sizes 3/8-Inch to 1-1/14" | Cr-V Steel

#adNeiko #ad - Design: the 6-point hex socket design prevents round-off on nuts and bolts under high torque exertion and hammering stress from the use of an impact wrench or electric wrench with a strong output. Includes: 14 pieces deep broach standard sockets come in a heavy duty custom case with size index for easy storage: 3/8, 1, 3/4, 1/2, 11/16, 15/16, 1-1/8, 7/16, 13/16, 7/8, 5/8, 9/16, 1-1/16, 1-1/4 inch.

Durable: each socket has black phosphate coating for maximum durability, protection, and will last for years in your tool collection at your automotive shop. Convenient: this automotive tool set utilizes high contrast laser etched markings on all pieces for the easy identification of sizes to keep you working at home or the garage on your car or vehicle.

Quality: the high impact pieces in each complete set are constructed of heavy duty drop-forged premium chrome vanadium Cr-V steel to withstand extreme levels of torque changes against fasteners in the automotive setting.

Brand	Neiko #ad
Manufacturer	Neiko #ad
Height	18.31 Inches
Length	2.28 Inches
Weight	9.83 Pounds
Width	4.61 Inches
Part Number	02476A
Model	02476A

5. uxcell

#ad

CR-V Sockets Metric 2" Length For Hand Use Only Blue, uxcell 1/2" Drive x H14 14mm Hex Bit Socket, S2 Steel Bits

#aduxcell #ad - Size1/2-inch drive socket, H14 14mm hex bit, 2-inch 55mm total length. High strength chrome vanadium steel sockets, hardness arrived at 58-60 HRC, increase turning power.

Ideal toolsuse with ratchet to improve speed in tightening hex drive fasteners. And the product has no insulation properties and is not suitable for electrical environments. Size markingssizes are stamped on sockets for easy to read and faster recognition. Precision bitsautomatically processe bit tips to ensure accurate size, chamfered ends insert smoothly into fastener head, reducing wear. Durablequenched and heat treated s2 alloy steel bits, reduce wear-outs.

Brand	uxcell #ad
Manufacturer	uxcell #ad
Part Number	a19072700ux0462

6. TEKTON

#ad

TEKTON 1/2 Inch Drive x 14 mm Hex Bit Socket | SHB23214

#adTEKTON #ad - 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners. S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.

Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion. Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin. Overall length: 2. 2 in. Shaft diameter: 055 in. Drive end Diameter: 1 in. Exposed Bit Length: 07 in. Beveled inner rim of the socket opening helps guide it smoothly onto fasteners. Large, clear die-stamped size marking is easy to read and can’t wear off.

Brand	TEKTON #ad
Manufacturer	TEKTON #ad
Height	1 Inches
Length	2.2 Inches
Weight	0.25 Pounds
Width	1 Inches
Part Number	SHB23214
Model	SHB23214
Warranty	No time limits, no receipts: tekton.com/tool-help

7. GearWrench

#ad

80662, GEARWRENCH 1/2" Drive Hex Bit Socket, 14mm

#adGearWrench #ad - Best quality heat treated steel. Sizes hard stamped on body of socket for easy identification of size. Long lasting nickel chrome and black oxide finishes. Hex head internal dimple retention feature force bit surface to opposite side for maximum retention.

Brand	GearWrench #ad
Manufacturer	GearWrench #ad
Height	1.02 Inches
Length	4.84 Inches
Weight	0.3 Pounds
Width	1.69 Inches
Part Number	80662
Model	80662

8. Utoolmart

#ad

1pcs, 1/2-Inch Drive Allen Bit Socket, Cr-Mo Steel, Master Impact Hex Driver, 14mm Hex Impact Socket, Utoolmart Hex Impact Bit Socket

#adUtoolmart #ad - Chamfered design- Chamfered ends insert smoothly into fastener head, reducing wear. Torque strength- chrome molybdenum steel provides excellent durability and strength with every impact movement; black phosphate finish for extra protection against rust and corrosion.

Pin hole- individual pinhole base design adds extra security by placing in a locking pin for stability when exerting strong torque motion especially on automotive projects. Dimension- 1/2-inch drive socket, h14 14mm / 055-inch hex bit, 3. 07-inch 78mm total length. And the product has no insulation properties and is not suitable for electrical environments. Ideal tools- use with ratchet to improve speed in tightening hex drive fasteners.

Brand	Utoolmart #ad
Manufacturer	Utoolmart #ad
Part Number	UT191104T-0096-us

9. Titan Tools

#ad

1/2 Dr. 14Mm Hex Bit Socket 15614, Titan Tools

#adTitan Tools #ad - Drive end detent notches provide secure retention of ratchets and extensions. 14mm hex bit constructed of strong S2 steel. Made in Taiwan. Easy to read die-stamped size marking. 1/2" drive chrome vanadium socket with corrosion-resistant chrome plated finish.

Brand	Titan Tools #ad
Manufacturer	Titan #ad
Height	4.6 Inches
Length	1 Inches
Weight	0.01 Pounds
Width	1.9 Inches
Part Number	15614
Model	15614

10. GENIUS TOOLS

#ad

447614, Genius Tools 1/2" Dr. 14mm Hex Impact Bit Socket, 76mmL CR-Mo

#adGENIUS TOOLS #ad - Trust genius for a quality tool at a value cost to you. Hex impact bit socket - 14mm Hex Bit Socket. Reliable and effective - impact Bit Sockets heat treated for strength with black oxide coated to handle the rigorous needs of professional technicians.

Peace of mind - purchase with confidence backed by the Genius Tools Limited Lifetime Warranty against manufacturer defects. Tool organization - Sizes are stamped for permanent and easy identification of size. Professional grade - genius tools are designed and made for use by professional technicians and built to perform over a lifetime of heavy use.

Ansi standards - meets or exceeds the standards established by the American National Standards Institute. Specifications - 1/2 inch drive Size with an overall length of 76mm or 2. 99 inches. Durable materials - made from Chrome Moly Steel for high strength and durability while having anti-corrosive properties.

Brand	GENIUS TOOLS #ad
Manufacturer	Genius Tools #ad
Height	1 Inches
Length	2.99 Inches
Width	1 Inches
Part Number	447614
Model	447614
Warranty	Limited Lifetime Warranty from Manufacturer Defect