As an Amazon Associate I earn from qualifying purchases.
Arcan #ad - Lightweight aircraft-grade aluminum: Allows for easy maneuverability. Colors may vary: alj3T silver or A20018 green. Dual pump pistons: Quickly raises the floor jack saddle to load.
Reinforced lift arm: Increases strength, chassis torsion control, and durability. Vehicle protection: designed with a rubber saddle and a foam handle bumper. Side-mount handle: allows for convenient jack positioning.
Stark USA #ad - Lift range, this hoist stand achieves the heights you need to easily get underneath a part or hold it up and out of the way. Right height for your job - with a 48-3/4in. Extra support - engine parts are extremely heavy and working on a freely supported engine is quite dangerous without the correct precautions.
It also excels in situations where a combination of sleek design and superior strength is desirable. Built with the best components - from the highest grades of rugged steel to the long lasting, corrosion-resistant lead-free paint finish, and every part in between, use quality components built to exacting standards to deliver top performance and reliability.
And the large saddle design cradles the work-piece, Even Toting A Load - The handle of the stand incorporates a thrust bearing that makes it easy to turn, allowing the stand to be properly positioned underneath the load. A large 24in. Use it day in and day out - the high-position hoist stand is the perfect choice for everyday vertical lifting and support in automotive and repair shops. Tripod base adds load stability from the ground up.
Arcan #ad - Colors may vary: xl20 = A20015. Bypass and overload valves: Prevents over-extension of hydraulic ram and jack use beyond rated capacity.
Steel construction: For heavy duty use. Dual pump pistons: Quickly raises the floor jack saddle to load. Complies with asme pase-2014 safety standard: We put all of our lifting equipment through a voluntary and rigorous safety certification process.
Pro-LifT #ad - Meets or exceeds ansi/pald standards. Double locks mechanism with both handle locks and mobility pin. High quality cast ductile iron ratchet bar. To 23-1/2 in. Sturdy stamped Steel Construction with 6 ton capacity.
Arcan #ad - 72". Wiper seals: Protect the hydraulic system from contaminants. Easy maneuverability: Wide front wheels and ball bearing mounted rear casters allows for easy transport.
Complies with asme pase-2019 safety standard: We put all our lifting equipment through voluntary and rigorous third party safety testing to ensure our products are among the safest in the market.
Seven Sparta #ad - Safe & heavy duty construction: Made of durable rubber material, Maximum Load Bearing 3 Ton. But not fit for Torin T42002. No-risk purchase! unconditional 30-day money-back guarantee.
If you're unsatisfied with this item for any reason, we'll immediately refund your purchase price. Perfect cushion design: jack pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand.
Omega Lift #ad - It is constructed with the sturdy stamped steel with a welded frame design for durability. It features wide pyramid foot base to provide the added strength and stable support. Omega lift jz060 is 6 ton jack stands that are designed to support your vehicle after lifting with a floor jack.
With the lifting range from 16 inches to 23-1/2 inches, it gives you the abilityto handle a wide range of vehicles including small cars, SUVs, and light duty trucks.
Its sawtooth design allows for quick height adjustments that lock into place. The ratchet bar is built with hight quality cast ductile iron with the mulitple position. Omega lift heavy duty jack stands are tested for reliability and safety to meets or exceeds ANSI/PALD standards. Height adjustment mechanism allows smooth upward movement while releasing handle locks and mobility pin. Ideal for home, farm, truck service, Auto, and shop use.
Pro-LifT #ad - Double locks mechanism with both handle locks and mobility pin. High quality cast ductile iron ratchet bar. Sturdy stamped Steel Construction with 3 ton capacity.
BIG RED #ad - Constructed of high-grade aluminum; Removable locking support pins provide added security and stability and is equipped with 6 locking positions.
Lightweight jack stands for supporting vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, ATV's, UTV's, jeeps, and more. Adjustable height ranges from 10-3/4" to 15-5/8" with a 3 ton 6, 000 lb load capacity; Saddle has a large surface area that provides better contact with the load being supported.
BIG RED #ad - Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks.
Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place. Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support.
1. Arcan
#adArcan 3-Ton Quick Rise Aluminum Floor Jack with Dual Pump Pistons & Reinforced Lifting Arm ALJ3T / A20018
#adReinforced lift arm: Increases strength, chassis torsion control, and durability. Vehicle protection: designed with a rubber saddle and a foam handle bumper. Side-mount handle: allows for convenient jack positioning.
More information #ad
2 piece handle: allows for easy storage. Bypass and overload valves: Prevents over-extension of hydraulic ram and jack use beyond rated capacity. Complies with asme pase-2014 safety standard: We put all of our lifting equipment through a voluntary and rigorous safety certification process.| Brand | Arcan #ad |
| Manufacturer | Arcan #ad |
| Height | 8 Inches |
| Length | 30 Inches |
| Weight | 56 Pounds |
| Width | 13.5 Inches |
| Part Number | ALJ3T |
| Model | ALJ3T |
| Warranty | 1 Year |
More information #ad
2. Stark USA
#adStark Underhoist Tripod Stand 2 Ton Capacity High Lift Jack Stand Reach Under Hoist Stand High-Position Lift Range, Red
#adIt also excels in situations where a combination of sleek design and superior strength is desirable. Built with the best components - from the highest grades of rugged steel to the long lasting, corrosion-resistant lead-free paint finish, and every part in between, use quality components built to exacting standards to deliver top performance and reliability.
More information #ad
The all-thread screw rod allows you to make the fine adjustments you need to obtain the perfect working height. X 24in. To 84in. But this 2-ton capacity stand provides the muscle and dependability expected from an extra point of support. And the large saddle design cradles the work-piece, Even Toting A Load - The handle of the stand incorporates a thrust bearing that makes it easy to turn, allowing the stand to be properly positioned underneath the load. A large 24in. Use it day in and day out - the high-position hoist stand is the perfect choice for everyday vertical lifting and support in automotive and repair shops. Tripod base adds load stability from the ground up.
| Brand | Stark USA #ad |
| Manufacturer | Stark USA #ad |
| Height | 48.5 Inches |
| Length | 24 Inches |
| Weight | 35.27 Pounds |
| Width | 24 Inches |
| Part Number | 58051 |
More information #ad
3. Arcan
#adArcan 2 Ton Low Profile Quick Rise Steel Floor Jack A20015 / XL20 , Black , 26 Inch
#adSteel construction: For heavy duty use. Dual pump pistons: Quickly raises the floor jack saddle to load. Complies with asme pase-2014 safety standard: We put all of our lifting equipment through a voluntary and rigorous safety certification process.
More information #ad
Low profile frame: For easy access under low ground clearance vehicles. 2 piece handle: Allows for easy storage. Vehicle protection: Designed with a rubber saddle and a foam handle bumper. Universal joint release mechanism: Provides precise control of jack.| Brand | Arcan #ad |
| Manufacturer | Arcan #ad |
| Height | 13.2 Inches |
| Length | 26 Inches |
| Weight | 69 Pounds |
| Width | 6.3 Inches |
| Part Number | XL20 |
| Model | XL20 |
| Warranty | 12 months parts / 12 months labor |
More information #ad
4. Pro-LifT
#ad6 Ton, Pack of 1, 18x12 Inch, Grey & Red, Pro-Lift T-6906D Double Pin Jack Stand
#adMore information #ad
Lifting range from 16 in. Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin. Ideal for home, truck service, farm, Auto, and shop use.| Brand | Pro-LifT #ad |
| Manufacturer | Pro-Lift #ad |
| Height | 10 Inches |
| Length | 18 Inches |
| Weight | 26.4 Pounds |
| Width | 12 Inches |
| Part Number | T-6906D |
| Model | T-6906D |
More information #ad
5. Arcan
#adArcan 3 Ton Low Profile Quick Rise Steel Floor Jack A20002 / XL3000A
#adComplies with asme pase-2019 safety standard: We put all our lifting equipment through voluntary and rigorous third party safety testing to ensure our products are among the safest in the market.
More information #ad
Model numbers may vary: XL3000A = A20002. Quick lift: double pump pistons raise saddle to the load fast. Steel side plates: High carbon steel side plates provide increased chassis strength. Lifting range: 3" to 19. Bypass and overload valves: Prevents over-extension of hydraulic ram and jack use beyond rated capacity.| Brand | Arcan #ad |
| Manufacturer | Arcan #ad |
| Height | 13.8 Inches |
| Length | 6.3 Inches |
| Width | 29.3 Inches |
| Part Number | A20002 / XL3000A |
| Model | A20002 / XL3000A |
| Warranty | 1 year |
More information #ad
6. Seven Sparta
#adSeven Sparta Jack Pad Adapter for Jack Stand Universal Rubber Slotted Frame Rail Pinch Welds Protector4Pack
#adIf you're unsatisfied with this item for any reason, we'll immediately refund your purchase price. Perfect cushion design: jack pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand.
More information #ad
Best protection for your car undercarriage: Seven Sparta jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand. Universal: the jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002.| Brand | Seven Sparta #ad |
| Manufacturer | Seven Sparta #ad |
| Part Number | 19042531 |
More information #ad
7. Omega Lift
#adHandle Lock and Mobility Pin for Auto Repair Shop with Extra Safety JZ060, Omega Lift Heavy Duty 6 Ton Jack Stands Pair, Double Locking Pins
#adWith the lifting range from 16 inches to 23-1/2 inches, it gives you the abilityto handle a wide range of vehicles including small cars, SUVs, and light duty trucks.
More information #ad
With both handle lock and mobility pin, and a large saddle surface area is designed for better contact with the load being supported, adding the extra safety while working underneath a car. It features double locking pins mechanism. Its sawtooth design allows for quick height adjustments that lock into place. The ratchet bar is built with hight quality cast ductile iron with the mulitple position. Omega lift heavy duty jack stands are tested for reliability and safety to meets or exceeds ANSI/PALD standards. Height adjustment mechanism allows smooth upward movement while releasing handle locks and mobility pin. Ideal for home, farm, truck service, Auto, and shop use.
| Brand | Omega Lift #ad |
| Manufacturer | Shinn Fu Company of America Inc. #ad |
| Height | 8 Inches |
| Length | 17.38 Inches |
| Width | 11.87 Inches |
| Part Number | JZ060 |
| Model | JZ060 |
| Warranty | It covers one year warranty from the date of purchase. |
More information #ad
8. Pro-LifT
#ad3 Ton, 1 Pack, Pro-LifT T-6903D Double Pin Jack Stand
#adMore information #ad
Ideal for home, farm, Auto, truck service, and shop use. Meets or exceeds ansi/pald standards. Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin. Fit type: Universal Fit.| Brand | Pro-LifT #ad |
| Manufacturer | Pro-Lift #ad |
| Height | 7.87 Inches |
| Length | 13.11 Inches |
| Weight | 13.86 Pounds |
| Width | 8.27 Inches |
| Part Number | T-6903D |
| Model | T-6903D |
| Warranty | 90 Days Warranty from the Day of Purchase |
More information #ad
9. BIG RED
#ad1 Pair, Red/Silver, BIG RED T43004 Torin Aluminum Jack Stands with Locking Support Pins: 3 Ton 6,000 lb Capacity
#adLightweight jack stands for supporting vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, ATV's, UTV's, jeeps, and more. Adjustable height ranges from 10-3/4" to 15-5/8" with a 3 ton 6, 000 lb load capacity; Saddle has a large surface area that provides better contact with the load being supported.
More information #ad
Wide foot base provides additional steadiness; Base is removable, allowing for compact storage when not in use. Meets asme safety standards and includes a limited 1-year manufacturer warranty.| Brand | BIG RED #ad |
| Manufacturer | Torin #ad |
| Height | 7.09 Inches |
| Length | 31.5 Inches |
| Weight | 6 Pounds |
| Width | 11.42 Inches |
| Part Number | T43004 |
| Model | T43004 |
| Warranty | Limited 1-year manufacturer warranty |
More information #ad
10. BIG RED
#ad1 Pair, Red, BIG RED T43202 Torin Steel Jack Stands: 3 Ton 6,000 lb Capacity
#adMulti-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place. Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support.
More information #ad
Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards. Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton 6, 000 lb load capacity.| Brand | BIG RED #ad |
| Manufacturer | Torin #ad |
| Height | 8 Inches |
| Length | 15 Inches |
| Weight | 7.7 Pounds |
| Width | 9 Inches |
| Part Number | T43202 |
| Model | T43202 |
| Warranty | Limited 1-year manufacturer warranty |
More information #ad
