Top 10 Crush Sleeve Eliminator Kit GM – Automotive Replacement Differential Assembly Kits

As an Amazon Associate I earn from qualifying purchases.

1. Nahntaipy


Crush Sleeve Eliminator Kit Fit for GM 12-Bolt Truck Differential, Metal Material

Nahntaipy #ad - Fitments: crush sleeve eliminator kit fit for GM 12-bolt truck differential. Function: make sure that you are equipped with suitable spacers for each setup.

Durable material: this crush sleeve eliminator kit is made of high-quality metal materials, wear-resistant, stable, longer use time, corrosion-resistant, and higher efficiency. What you will get: 1* compression sleeve eliminator kit and 24-month service, if you have any questions please contact us, we'll reply to you as quickly as possible. Easy to install: no need to cut and stable performance, please feel free to let us know, if you have any questions about products and install, we'll reply to you within 12 hours.
BrandNahntaipy #ad
ManufacturerYookeep #ad
Part NumberCrush Sleeve Eliminator Kit



GELUOXI Crush Sleeve Eliminator Kit SKCSGM12T Replacement for GM 12-Bolt Truck Chevrolet G10 Accessories Direct Replaces

GELUOXI #ad - Please check if the item we show is identical to yours. Meets quality standards, email is a good method to contact us, and we will reply you as soon as possible. Replacement for GM 12-Bolt Truck. Customers are advised to compare Part OEM Number SKCSGM12T. High reliability and high performance. Standard size, tested before shipping. Package will include: 1x Crush Sleeve Eliminator Kit. If customers have any questions, direct replacement. Replacement for skcsgm12t crush Sleeve Eliminator Kit GM 12-Bolt Truck.
BrandGELUOXI #ad
ManufacturerGELUOXI #ad
Part NumberSKCSGM12T

3. Yukon Gear & Axle


Yukon Gear & Axle SK CSGM8.5 Crush Sleeve Eliminator Kit for GM 8.5/Chrysler 9.25 Differential

Yukon Gear & Axle #ad - Precision Machined for Specific Applications. This kit contains a solid spacer and shim kit to eliminate the crush sleeve and set pinion bearing preload. Bearings and Races from Timken or Koyo. Crush sleeve eliminator kit for GM 8. 5" and Chrysler 9. 25" differential.
BrandYukon Gear & Axle #ad
ManufacturerYukon Gear #ad
Height0 Inches
Length0 Inches
Weight0.13 Pounds
Width0 Inches
Part NumberSK CSGM8.5
ModelSK CSGM8.5



Lkonwee Crush Sleeve Eliminator Kit for Toyota 8 Differential

LKONWEE #ad - 4. Once preload has been set, it will not change, and allows you to swap yokes, or seals in the future without worry of over-crushing the crush sleeve.1. Fit for t0y0ta 8" differential solid Pinion Spacer V6- SK CSTV6. 2. Wide variety of shim thickness for each individual application to ensure you have the right shims for every set up. 3. The shim kits are precision machined and tailored, increase durability and integrity of your setup.
BrandLKONWEE #ad
ManufacturerLKONWEE #ad
Part NumberRAP01

5. Mission Automotive


Works with Various Style Yokes, Flanges, or Axles, Extra Strength Puller for Loosening Pinion Flange and Nuts, Stainless Steel Pinion Yoke Wrench Tool, Extra 1/2" Hole that Fits Most Sockets

Mission Automotive #ad - Fits almost all pinion and companion flanges. Holds the yoke in place -- use the pinion wrench while applying torque. To address this, we added an extra 1/2" square socket. It can also handle other high torque tasks, like crush sleeves.

The problem is, you might need multiple. Plus, for tight spaces, our stainless steel will prevent any rounding. You'll be able to utilize your pinion depth setting tool for years. For leverage, grab a 1/2” breaker bar or 3/4” drive tool. Or for setting the bearing pre-load. Additional 1/2" square socket -- other yoke flange wrenches only have one and round out over time. Extra strength -- instead of soft carbon steel that strips out easily, we crafted our flange wrench with Stainless Steel.

Utilize this tool to handle the insane amount of torque needed to get the job done. There are multiple slotted bolt patterns for 1/4", Dana, AMC, 5/16" and 3/8" fasteners. The center socket hole is 2". Tighten up -- use the pinion flange tool with a torque wrench to tighten retaining bolts and nuts. It will help you loosen even the most stubborn pinion nuts. Compatible with -- our pinion yoke wrench is compatible with most ford, and gm yokes.
BrandMission Automotive #ad
ManufacturerMission Automotive #ad
Part Number5257

6. Sporthfish


Stainless Steel Pinion Yoke Wrench Tool,Suitable for Various Styles of Yokes,Axles,Flanges;Fits for Most Sockets Extra 1/2" Hole;Strength Puller Suitable for loosening nuts flanges

Sporthfish #ad - Size: there are a variety of slotted bolt styles for 1/4", 5/16" and 3/8" fasteners. Center socket hole is 2". Suitable for almost all pinion gears and companion flanges. Fitment: compatible with most ford, Dana, AMC and GM yokes.

Material: made of high quality stainless steel, which is not easy to peel off, and it has a high strength characteristy. More size information Please Refer to Our Second Picture. ". Or used to set the bearing preload. It can even help you loosen the most stubborn pinion nut. It can also handle other high-torque tasks, such as squeezing sleeves. Use a pinion flange tool with a torque wrench to tighten the fixing bolts and nuts.

Function: use a pinion wrench while applying torque. Plus, our stainless steel material allows you to use this tool for many years. Sophisticated design: usually the yoke flange wrench has only one 1/2" square socket, but we consider that you may need to use more than one in the work, so we have added an additional 1/2" square socket. You can use this tool to handle the crazy torque required to get your job done.
BrandSporthfish #ad
ManufacturerAVOMARR #ad
Part NumberAVOMARR-002



Easy-to-Use U Joint Puller, U Joint Tool Works On Most Class 7 and Class 8 Trucks, Green, OEMTOOLS 24538 Heavy Duty Automotive U Joint Puller

OEMTOOLS #ad - Gentle on vehicles: prevent damage on the driveshaft, joints, yokes, and bearing cups by utilizing our U joint press; This excellent DIY universal joint puller saves you a trip to the mechanic and removes the need for hammering and heating methods. A professional’s u joint puller kit: working on a budget doesn’t mean you have to sacrifice quality; Professional mechanics will find that our durable universal U joint puller holds up to their heavy duty jobs at a low cost value compared to other name brands.

Easy and safe to use: no hassle and safe to use; our heavy duty universal joint puller can be used with a 1" drive impact wrench or smaller; Yokes easily fit into the 1. 5” to 2. 2” outside diameter bearing cup; Lubricate the screw before use.

Remove on variety of models: don’t rely on dangerous and damaging methods like hammers, sockets, and vises to remove U joints; Remove stubborn seized U joint cups on most class 7 and 8 trucks with our high quality affordable U joint removal tool. Durable build quality: built to hold up against multiple heavy duty uses; Easily torque the U joint removal tool kit by hand to remove a seized back or front driveshaft U-joint; Not intended for use with pneumatic impact drills or similar tools.
ManufacturerOEMTOOLS #ad
Height13.6 Inches
Length8.5 Inches
Weight11.75 Pounds
Width3.7 Inches
Part Number24538
WarrantyOEMTOOLS Limited Lifetime



GTMOTOR Active Fuel Management Disabler AFM RA003 Compatible with most GM Vehicles

GTMOTOR #ad - Compatible with gmc buick CHEVROLET and other models. Small product, great function, make you get enough power while driving, keep V8. Will not modify your car's program, keep your car in factory ECU. Note: keep v8 may cause excessive water temperature in some car. Simple installation, manual included, plug and play.
BrandGTMOTOR #ad
ManufacturerGTMOTOR #ad
Height0.8 Inches
Length2.5 Inches
Width2 Inches
Part NumberRA003
Model‎Amanita muscaria Clenbuterol Codeine

9. Yukon


Chrysler 7.25", 8.25" Ford 8" & GM 7.75". 0.480" Long., Yukon Gear & Axle YSPCS-010 Crush Sleeve For Model 35

Yukon #ad - Approximately 0495" long. Crush sleeve for model 35, chrysler 7. 25", 8. 25" ford 8" and GM 7. 75" differentials. Engineered to Fit Specific Differential Applications. High quality Small Parts.
BrandYukon #ad
ManufacturerYukon Gear #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part NumberYSPCS-010
Warranty1 year warranty against Manufacturer defects

10. Powerbuilt


Powerbuilt Alltrade 648605 Kit 20 Power Steering and Alternator Pulley Removal and Installation Tool Set Black

Powerbuilt #ad - Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve. For use on most power steering pump pulleys. Tool solutions for most all situations. Storage case includes usage photos. Made to be the most reliable tools in the market today. Built to exceed tool standards. Kit 20 includes 14-piece for removal and installation of the power steering pump and alternator pulleys. Tool set for removal and installation of power steering pump and alternator pulleys.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools #ad
Height7.25 Inches
Length3 Inches
Weight2.3 Pounds
Width9.25 Inches
Part Number648605