As an Amazon Associate I earn from qualifying purchases.
1. ALZO digital #ad
ALZO Short Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment with 10 Inch Drop #adALZO digital #ad
- We recommend using a remote control where possible. With the typical drop ceiling, with 25 degrees pitch; projector drop from the ceiling is 10 inches, a medium to heavy projector a small amount of movement or sway will occur when touching the projector.
Projector is not included; it is shown for demonstration purposes only. Using the included support wire will provide for a very safe install. Includes an american writtEN installation manual with illustrations and photos.
Includes scissor clamp and one 8 inch aluminum suspension rod, and screws; maximum spider mount leg span is 12 inches, mount hole to mount hole. Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, Optoma, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Benq, Viewsonic and most other projectors.
Easy to install on a suspended drop ceiling with a 1-inch wide t-bar frame, and accessory 8-inch extension rods can be added to lower the projector.
|Brand||ALZO digital #ad|
|Manufacturer||ALZO Digital #ad|
2. Amer #ad
Amer Mounts AMRDCP100KIT Universal Adjustable 2 x 2 feet Drop Ceiling Projector Mount, Suspended Drop-in Ceiling Projection Mounting Kit, White #adAmer #ad
- Helping you to get your projector in the perfect position. Ceiling mount 2' x 2' Reinforced Steel Plate. Projector mount - multiple mounting holes for optimal alignment. Projector bracket - lightweight, heat dissipating surface.
3. VIVO #ad
Suspended Drop-in Ceiling Projection Mounting Kit, MOUNT-VP07DP, VIVO Universal Adjustable 2 x 2 feet Drop Ceiling Projector Mount, White #adVIVO #ad
- Vivo drop ceiling projector mounts - we create affordable solutions designed with creativity and quality to transform your visual display. Fully adjustable - enjoy comfortable viewing angles that reduce strain on the neck, and eyes with -15° to +15° tilt, -15° to +15° swivel, back, and 360° rotation.
Cable management holes are provided in the plate to keep cords organized and tangle-free during adjustments. If your projector has 3 mounting holes, simply remove one of the arms to fit your display.
We've got you covered - sturdy steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns. Strong support - the steel plate replaces a standard ceiling tile and can hold up to 29.
7 lbs for a safe and secure setup. Patented--. Universal projector mount - adjustable mounting points enable this bracket to fit the majority of projector brands on the market with mounting hole diagonals measuring up to 12. 5”. Mount-vp07dp is a projector mount capable of replacing any 2’ x 2’ ceiling tile, providing custom placement options with no drilling required. Featuring sleek, durable material, it’s made to last and fit virtually any environment.
|Warranty||3 Year Warranty|
4. ALZO digital #ad
ALZO Suspended Drop Ceiling Video Pico Mini Projector Mount #adALZO digital #ad
- Mini ball mount allows for tilt angle adjustment. Maximum weight loading is 4 pounds. Includes scissor ceiling frame clip and two 8 inch support rods that create an 9 or 17 inch drop from the ceiling. For small pico video projectors. Rod mounts to 1/4 in x 20 hole in bottom of projector.
5. QualGear #ad
3" 1.5", White, QualGear Pro-AV QG-KIT-S-3IN-W Projector Mount Kit Accessory Suspended Ceiling Adapter #adQualGear #ad
- Color installation manual. 5" npt thread compatible. Suitable for suspended/drop ceilings. 1. Professional quality. 5 year limited.
|Manufacturer||QualGear LLC #ad|
6. VIVO #ad
Height Adjustable Projection, MOUNT-VP02W, White, VIVO Universal Extending Ceiling Projector Mount #adVIVO #ad
- Easy installation with quick release hooks that attach and detach by tightening and loosening mounting bolts. Fully adjustable with 15-degree tilt, and 360-degree rotation, 15-degree swivel, hitting all the right viewing angles.
Telescoping height adjustment mounting system extends your projector from 15” to 23” from the ceiling surface.
Solid construction made entirely of high grade steel, supporting projectors up to 30 lbs. Universal mounting fitting the majority of projectors on the market. Distance between mounting holes on back of projector must be between 2" to 12. 5” diagonally.
|Warranty||3 Year Warranty|
7. Tuimen #ad
Tuimen Projector Mount, Universal Projector Mount with Adjustable Projection Angle for DLP Projectors, Projector Mount Drop Ceiling Extandable Length 11.8", 18.89" #adTuimen #ad
- Universal ceiling mount - fits most of different DLP projectors, you can install the projectors on the ceiling or on the wall when you confirm the screw hole on the the back is 1/4 inch. You can refer to the installation video and download a assembly manual on the product website.
Fully adjustable angle - supported to 35-degree tilt, 90-degree swivel, and 360-degree rotation.
Five minutes installation - the package contains some assembled parts and a user manual. Tested 11 lbs load support - the mount factory has done a lots of load-support tests to confirm that the projector mount can hold a maximum load of 11 Lbs when properly installed.
Different from 9. 99 usd - different from the product with less than 01 lb low plastic mount, support length adjustment, the ceiling mount made of high quality aluminum allow, and a snap-fit design. Hits all the right viewing angles so you can get a comfortable projection angle.
8. ALZO digital #ad
ALZO Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment #adALZO digital #ad
- Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, Optoma, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Benq, but for projectors over 2 pounds, Viewsonic and most other projectors.
Includes american-written installation manual with illustrations and photos; simple assembly includes all metal parts and comprehensive kit of screws and hardware. Projector is not included, it is shown for demonstration purposes only; includes an installation guide see link below under "Technical Specification".
With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. The suspension rod is 8 or 16 inches long and the mount bracket is gunmetal gray; projector drop from the ceiling is either 10 or 20 inches.
We recommend using a remote control where possible. Easy to install on a drop ceiling with 1 inch wide t-bar frame, with scissor clamp and two 2 8 inch aluminum suspension rods; the two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. Using the included support wire will provide for a very safe install.
|Brand||ALZO digital #ad|
|Manufacturer||ALZO Digital #ad|
9. Coret #ad
Coret Projector Drop Ceiling Mount Wall Mount, Universal Hanger Projector Wall Mount Shelf Holder,Adjustable Height Pole Mount Wall Projector Mount for Epson Optoma Benq,Hold up to 33 lbs White #adCoret #ad
- We provide detailed instructions for use;If the product is not suitable for your projector, feel free to contact us and we will help you as soon as possible with our professional experience. Easy to install and widely usequick release hooks attach and detach by tightening and loosening the mounting bolts.
Upgrade cable management systemthe projector mounts adopts a large square tube design which helps keep HDMI, audio, and video cables concealed and organized;The screws also upgrade to hand-tightening use;. Extension from the wall wall mounted installation: 16.
9 inches to 25. 6 inches. All necessary hardware and instructions are provided for assembly. This projector hanger is perfect for use in classrooms, hotels, restaurants, boardrooms, home cinema, etc. Full-motion designpitch: +/- 15 degrees, roll: +/- 8 degrees, swivel: height Adjustment ceiling installation: 5 inches to 25.
6 inches. Our products can bear the maximum support weight: 33 lbs/15 kg, which cna use for most universal projector such as Epson Optoma Benq and so on;. Strong supportmade of premium quality and heavy duty steel, provide a reliable strength and support. Warranty & support before purchasing, and the diameter of screw holes is 3 mm, make sure the projector has 3-4 install holes, or if you have any questions about it, 4 mm or 5 mm.
10. Homcine #ad
Homcine Projector Ceiling/Wall Mount White, Low Profile Universal Projector Holder/Bracket/Hanger Kit with Extendable Arm, Adjustable Height Pole Drop Ceiling Quick Release for Epson Optoma Benq #adHomcine #ad
- Fully adjustable with 15-degree rotation horizontally x-axis to the left or right, 15-degree tilt vertically Y-axis up or down, load capacity 44 lbsHeavy-duty commercial-grade steel construction and connect with a universal head, not a single hole, highly maneuverable to help you get the most potential out of your projector.
Newly designed 3-in-1 retractable 1. Adjustable height, weight tested at 44lbs to ensure projectors are in strong arms. If the product is not suitable for your projector, please do not hesitate to contact us.
Flush ceiling installationminimum length: 5”, 2. Telescoping arm ceiling installation（height adjustment range: 5”-25. 6”, 3. Wall-mounted installationextension range : 16. 9”- 25. 6”. Universal mounting design compatible with the projector models which have 3-4install holes and the mounting hole distance ranging up to 14.
2 inches. This projector hanger is perfect for use in classrooms, restaurants, boardrooms, hotels, home cinema, or anywhere a projector needs to be mounted. Quick release and no-slip the projector hanging mount is easy to install or disassemble with quick-release hooks which allow dismounting for servicing of filters and bulbs but notice still require take unscrewing 4 bolts to release the projector for security and stability.