As an Amazon Associate I earn from qualifying purchases.
ECOTRIC #ad - Winch plate:24 x 7. Feature: fits up to 37" tire. Necessary hardware and installation instructions are included. Steel construction 2" x 120" wall. Overall dimension: 56-1/8"l x 12"W x 16-3/8"H.
Heavy duty steel construction with powder coat finish, textured black powder coat for corrosion protection and durability. Package include: 1 piece of front bumper. Feature: two lights tabs on the hood is for you to mount extra lights if you need.
Smittybilt #ad - Requires no drilling or modifications - direct bolt-on installation. Heavy duty 3/16" cold rolled steel. Classic rock crawler design for Jeep TJ, YJ and LJ provides front end protection. Bumper also available without D-ring mounts 76740 Textured black powder coated finish.
EAG #ad - Welded hoop protects the front of the Wrangler TJ. Two tabs on pre-runner hoop for extra off-road lights. D-rings are included-4. 75 ton capacity each. Winch. D-ring mounts are welded both inside and out for increased strength.
KUAFU #ad - Fitment:the front bumper is compatible with 1986-2006 Jeep Wrangler TJ YJ. Installation:even if there is no manual, the installation is very convenient and fast. Mounting accessories you need are included. Note:fits up to 37" tire.
HECASA #ad - Color: Black. Fitment: front & rear bumper compatible with 1986-2006 Jeep Wrangler TJ YJ. Fits up to 37" tire. Mounting accessories you need are included.
Surface: black powder coated surface avoid rust and rot due to the influence of humidity or debris. Overall dimension: 56"L x 12"W x 15"H. With 2" hitch receiver & 2 d-rings & 2x 40W LED Lights, textured off road style. Note: you will receive 2 packages.
RI RONGHUI #ad - Front bumper is equipped with 4x20w led aluminum lights + winch plate + 2x4. 75t d-ring. Easy to install. The built-in led lights are more beautiful and better to see the road conditions.
Materials: 5/32 inch thick low carbon hard steel and 2 inch x 0120 inch precision tolerance steel tube, with stronger bumper, black powder coating, corrosion resistance and durability.
The rear bumper is equipped with 4X20W LED aluminum light+ 2x4. 75t d-ring + 2” receiver hook. Install directly with screws. No drilling or cutting is required. Front bumper is equipped with two 9500-pound rated d-rings including black isolators and gaskets on a sturdy mount, and is equipped with a sturdy tube on the rider.
Nilight #ad - Thanks to its convenient bolt-on solution, this bumper installs quickly and easily without requiring any modification to your vehicle. Best service: buy at nilight, you earn what you buy! we offer 2 Years Nilight and Lifetime Best Customer Service.
Fit type: Universal Fit. If you have any questions or problems, please contact us. Perfect for off-road use: featuring 2x nilight 18w LED Lights two high strength D-Ring mounts and built-in winch plate this Nilight Rear Bumper is perfect for off-road use.
120" steel tubing for superior strength and durability, Give your car a tougher look &360° Protection. Heavy duty construction: our front bumper is manufactured from heavy duty 5/32" steel sheet and 2"X0 Original vehicle Mould, More Precision. Perfect fitment: fit for 87-06 jeep wrangler tj & yj. High accuracy laser measuring and cutting ensure that the bumper has a correct 360° fit.
Smittybilt #ad - Can be used with various winch plates for TJ model. Integrated D-ring mounts, welded inside and out. Reinforced corners and sides. Deflective angles are designed to protect hood in a roll-over.
Hooke Road #ad - Front bumper: built-in winch plate for up to 12, 000lb. Package come with Mounting Hardware and User Manual. Winch; d-rings with rubber isolators & 2× 18W LED Lights Included.
Fitment: hooke road front bumper + rear bumper with tire carrier set compatible with Jeep Wrangler TJ 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006. Easy installation: front and rear bumpers are Designed to be Directly Bolt-on Install; No Drilling Required.
u-Box #ad - Bumper lighting2x 18W LED flush mount Spotlights included. Easy bolt-on installation-designed to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation.
Fitment-u-box wrangler steel front bumper w/ stinger bar fits for jeep wrangler 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Jeep Wrangler TJ & 2004 2005 2006 Jeep Wrangler LJ. Installation guide included.
1. ECOTRIC
#adECOTRIC Front Bumper Compatible with 1986-2006 Jeep Wrangler TJ YJ with Winch Plate D-Ring Rock Crawler Black
#adHeavy duty steel construction with powder coat finish, textured black powder coat for corrosion protection and durability. Package include: 1 piece of front bumper. Feature: two lights tabs on the hood is for you to mount extra lights if you need.
More information #ad
Function: this bumper will protect the car body from scratches, and the design will bring your car with a sporty looking. Which is tough enough. Built in winch plate for mounting winch which is more than 9, 000Lbs. Built in safety catch for those uneven parking situations. Fitment: this front bumper is compatible with 1986-2006 Jeep Wrangler TJ YJ, please check the car’s model and year before purchasing.| Brand | ECOTRIC #ad |
| Manufacturer | ECOTRIC #ad |
| Height | 16.34 Inches |
| Length | 12 Inches |
| Weight | 65 Pounds |
| Width | 56.14 Inches |
| Part Number | CA-110 |
| Model | CA-110 |
More information #ad
2. Smittybilt
#adSmittybilt 76740D SRC Classic Front Bumper with D-Ring Mounts and Shackles for 1976-2006 Jeep® Wrangler TJ/YJ/LJ
#adMore information #ad
| Brand | Smittybilt #ad |
| Manufacturer | Smittybilt #ad |
| Height | 5 Inches |
| Length | 56 Inches |
| Weight | 40 Pounds |
| Width | 6 Inches |
| Part Number | 76740D |
| Model | 76740D |
More information #ad
3. EAG
#adEAG Steel Front Bumper with Winch Plate Black Textured Fit for 87-06 Wrangler TJ YJ
#adMore information #ad
One piece welded design for ultimate strength. Manufactured from 5/32" cold rolled steel sheet and 2"x. 120 steel tubing. Fit for 1987-2006 tj yj Wrangler all models. Textured black powder coat for corrosion protection and durability. No cutting and no drilling required. Built-in winch plate for up to 12, 000 lbs.| Brand | EAG #ad |
| Manufacturer | EAG #ad |
| Height | 11.42 Inches |
| Length | 63.39 Inches |
| Weight | 58.86 Pounds |
| Width | 18.5 Inches |
| Part Number | JTJFB002 |
| Model | JTJFB002 |
| Warranty | Lifetime structural warranty against manufacturers defects |
More information #ad
4. KUAFU
#adFront Winch Bumper Black Compatible with 1986-2006 Jeep Wrangler TJ YJ With D-rings
#adMore information #ad
Steel construction 2" X 120" wall. Overall dimension: 56-1/8"l x 12"W x 16-3/8"H. Material:it is made of alloy steel, with fine workmanship, high hardness, wear resistance, and durability. Surface:black powder coated surface avoid rust and rot due to the influence of humidity or debris. Winch plate:24 x 7.| Brand | KUAFU #ad |
| Manufacturer | KUAFU #ad |
| Height | 16.34 Inches |
| Length | 56.14 Inches |
| Width | 12 Inches |
| Part Number | BL539 |
| Model | BL539 |
More information #ad
5. HECASA
#adHECASA Front & Rear Bumper Compatible with 1986-2006 Jeep Wrangler TJ YJ Rear Bumper with LED Lights 2 Packages Delivery with D-rings
#adSurface: black powder coated surface avoid rust and rot due to the influence of humidity or debris. Overall dimension: 56"L x 12"W x 15"H. With 2" hitch receiver & 2 d-rings & 2x 40W LED Lights, textured off road style. Note: you will receive 2 packages.
More information #ad
Rear bumper size: 3/16" mild steel plating and 2"x0120" tubing. Steel construction 2" X 120" wall. Feature: material: made of alloy steel, with fine workmanship, wear resistance, high hardness, and durability. Installation: even if there is no manual, the installation is very convenient and fast. Front bumper size: 56"width x 7. 5" depth. Winch plate:24 X 7.| Brand | HECASA #ad |
| Manufacturer | Mod Vanten #ad |
| Part Number | MO-905 |
| Model | MO-905 |
More information #ad
6. RI RONGHUI
#adRonghui Wrangler TJ Bumper Combo Front & Rear Bumpers with Oil Drum Rack +Tire Carrier fits 1997-2006 Wrangler TJ
#adMaterials: 5/32 inch thick low carbon hard steel and 2 inch x 0120 inch precision tolerance steel tube, with stronger bumper, black powder coating, corrosion resistance and durability.
More information #ad
Suitable for 1997-1998-1999-2000-2001-2002-2003-2004-2005-2006 Wrangler TJ models. The rear bumper is also equipped with two sturdy 9500-pound rated D-rings including black isolators and washers. The rear bumper is equipped with 4X20W LED aluminum light+ 2x4. 75t d-ring + 2” receiver hook. Install directly with screws. No drilling or cutting is required. Front bumper is equipped with two 9500-pound rated d-rings including black isolators and gaskets on a sturdy mount, and is equipped with a sturdy tube on the rider.
| Brand | RI RONGHUI #ad |
| Manufacturer | Ronghui #ad |
| Weight | 208.8 Pounds |
| Part Number | TJ-QG03-HG05-B |
| Warranty | 2 Years |
More information #ad
7. Nilight
#adWinch Plate and 2 x D-Rings,Upgraded Textured Black,2 Years Warranty JK-55A, Nilight Front Bumper Compatible for 87-06 Jeep Wrangler TJ & YJ Rock Crawler Bumper with 2 x LED Lights
#adFit type: Universal Fit. If you have any questions or problems, please contact us. Perfect for off-road use: featuring 2x nilight 18w LED Lights two high strength D-Ring mounts and built-in winch plate this Nilight Rear Bumper is perfect for off-road use.
More information #ad
Easy, bolt-on installtion:this nilight mid width rear Bumper is also designed with ease of use and installation in mind. 120" steel tubing for superior strength and durability, Give your car a tougher look &360° Protection. Heavy duty construction: our front bumper is manufactured from heavy duty 5/32" steel sheet and 2"X0 Original vehicle Mould, More Precision. Perfect fitment: fit for 87-06 jeep wrangler tj & yj. High accuracy laser measuring and cutting ensure that the bumper has a correct 360° fit.
| Brand | Nilight #ad |
| Manufacturer | Nilight #ad |
| Height | 10 Inches |
| Length | 56 Inches |
| Width | 14 Inches |
| Part Number | JK-55A |
| Model | JK-55A |
| Warranty | 2 Years Warranty |
More information #ad
8. Smittybilt
#adSmittybilt SRC Front Stinger Bumper for Jeep TJ /YJ
#adMore information #ad
2” dom 120, wall tubing. Base plate is 3/16” cold rolled steel. Fits 1987-06 wrangler TJ/YJ. Provides maximum clearance for approach and departure angles.| Brand | Smittybilt #ad |
| Manufacturer | Smittybilt #ad |
| Height | 11.42 Inches |
| Length | 5.12 Inches |
| Weight | 60 Pounds |
| Width | 17.72 Inches |
| Part Number | 76521 |
| Model | 76521 |
| Warranty | 5-Year limited |
More information #ad
9. Hooke Road
#adHooke Road Wrangler TJ Rear Bumper with Tire Carrier + Front Bumpers Combo Compatible with Jeep Wrangler TJ 1997-2006
#adFitment: hooke road front bumper + rear bumper with tire carrier set compatible with Jeep Wrangler TJ 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006. Easy installation: front and rear bumpers are Designed to be Directly Bolt-on Install; No Drilling Required.
More information #ad
Rear bumper: with swing out spare tire arm rack, accommodates up to a 37" tire; Built-in Receiver Hitches Rated at 9, 500 lbs. D-rings with rubber isolators & 2× 18W LED Lights Included. Material: heavy duty 5/32" steel construction and 2" x 0120" tubing;two stage textured black powder Coat Finish;Premium E-Coating Process for 5-Year Corrosion Protection and Durability.| Brand | Hooke Road #ad |
| Manufacturer | Hooke Road #ad |
| Part Number | Z.BXG.1012+1010AB |
More information #ad
10. u-Box
#adU-Box TJ Front Bumper w/ Stinger & Winch Plate & LED Lights for Jeep Wrangler TJ 1997-2006
#adFitment-u-box wrangler steel front bumper w/ stinger bar fits for jeep wrangler 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Jeep Wrangler TJ & 2004 2005 2006 Jeep Wrangler LJ. Installation guide included.
More information #ad
Featuresbuilt-in winch plate for up to 12000 lbs; High strength D-Ring mounts w/D-Rings included. Bumper weightbumper Weight: About 73 lbs. Heavy duty construction-heavy-duty, high tensile 10-gauge9/64 inch steel for the bumper main body, 7-gauge3/16 Inch for the mounting structure plate; Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use.| Brand | u-Box #ad |
| Manufacturer | u-Box #ad |
| Weight | 73 Pounds |
| Part Number | SHB1013AB |
More information #ad
