Top 10 Phone Holder for Car Dashboard Mount – Cell Phone Automobile Cradles

As an Amazon Associate I earn from qualifying purchases.

1. iOttie

#ad

Smartphones, Nokia, Moto, Samsung, Huawei, iOttie Easy One Touch 5 Dashboard & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, LG

#ad
iOttie #ad - Telescopic arm: the improved telescopic arm now extends from 5 inches to 8 inches as opposed to the Easy One Touch 4 which only extended to 6. 5inch and pivots 260 degrees. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button.

Mount or remove your phone in seconds with the patented Easy One Touch Mechanism. Magnetic cord organizer: Keep charging cables neatly organized with the magnetic tab located near the bottom foot. Wide compatibility: new larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size.

Easy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. This enables a myriad of customized viewing angles while you’re on the road. The mount’s arms will close automatically, holding your device securely while you drive.
BrandiOttie #ad
ManufactureriOttie #ad
Height4 Inches
Length6.5 Inches
Weight0.45 Pounds
Width4.2 Inches
Part NumberHLCRIO171AM
ModelEasy One Touch 5
Warranty2 year manufacturer

2. Qifutan

#ad

Cell Phone Holder for Car Phone Mount Long Arm Dashboard Windshield Car Phone Holder Strong Suction Anti-Shake Stabilizer iPhone Car Holder Compatible with All iPhone Android Smartphone

#ad
Qifutan #ad - Note: use warm water to wash the car holder's suction cup if the surface is dirty or it can not stick firmly, a locking lever, then let it air dry. Broad vision: qifutan cell phone car mount features a 16cm/6. 2in aluminum long gooseneck that sends your phone much closer to you.

One-hand operation: press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand. You can enjoy a more convenient and secure drive. It is favorable for navigation and sending and receiving phone calls. Most importantly, you can bend it in every direction to avoid obstructing the view. It sticks securely and easily on the dashboard or most flat surfaces and removes the phone car mount without leaving any nasty marks.

Secure steady installation: qifutan car mount for iphone 13/12/11 features an extra-strong vacuum suction cup with a layer of super sticky gel, and an anti-shake stabilizer. Ideal viewing angle: the car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle. Fit well for the smartphone which’s the width between 4''-7''in and the most thickness. Make your operation more fluently. It can be mounted on the dashboard or windshield firmly.
BrandQifutan #ad
ManufacturerQifutan #ad

3. VICSEED

#ad

VICSEED Universal Cell Phone Holder for Car Solid & Durable Car Phone Holder Mount for Dashboard Windshield Air Vent Long Arm Strong Suction Cell Phone Car Mount Thick Case Heavy Phones Friendly

#ad
VICSEED #ad - True universal cell phone holder for car super wide arm enables this car cell phone holder mount to fit for all smart phones and thick cases. The extremely flexible air vent clip fits for most of cars; the silicone on the clip helps this vent phone holder grip tightly on the air vent and protects the blades from scratching.

Release your smart phone by pressing the left bottom release button in one second. It is compatible with iphone 13/ 13 mini/ 13 pro/ 13 pro max/ 12/ 12 mini/ 12 pro/ 12 pro max/ se/ 11/ 11 pro/ 11 pro max/ xs/ xr/ xs max/ x/ 8/ 8 plus/ 7/ 7 plus/ se/ 6s/ samsung galaxy note20/ s20/ s20+/ s20 ultra 5g/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge, Nokia and all cellphones, LG, Google, Sony, Sony, GPS device. Stable and safe car phone mount upgraded super strong stickiness suction cup, and 2-step lock mechanism provide extremely strong suction power.

Multi-function cell phone holder 3 in 1 multiple functions car phone holder, can be mounted on dashboard windshield or air vent firmly. The high quality carbon fiber panel always keep itself in clean condition. You deserved to get this durable car phone mount. The extra dashboard pad, provides smooth surface. So the car holder can stay more firmly and securely. Apply to most of cars, trucks, taxis; good assistant for Uber, made with best airliner PTFE PC material, pickup trucks, Lyft drivers.
BrandVICSEED #ad
ManufacturerVICSEED #ad
Height2.8 Inches
Length5.98 Inches
Weight0.7 Pounds
Width4.61 Inches
Warranty1-year Manufacture Warranty

4. Loncaster

#ad

Android Smartphones, GPS Devices and More, Loncaster Car Phone Holder, Samsung, Black, Slip Free Desk Phone Stand Compatible with iPhone, Car Phone Mount Silicone Car Pad Mat for Various Dashboards

#ad
Loncaster #ad - Just rinse with water and dry it, it will be the same as the new one. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, lg, samsung galaxy note 8 /9/10 /10 pro/20 ultra, Sony, S 20 plus/ 8 plus / 9 plus /10 plus, IPAD, S 7 Edge, Pixel, Mi, S20/S 8 /9 /10, HTC, Huawei, Nexus, Garmin and so on.

Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick. Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn.

Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.
BrandLoncaster #ad
ManufacturerLoncaster #ad
Height1.8 Inches
Length4.8 Inches
Weight0.37 Pounds
Width4.8 Inches
Part Numberyx-40
Model40

5. iOttie

#ad

Huawei, Smartphones, Nokia, Samsung, Moto, iOttie Easy One Touch 4 Dash & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, Black, LG

#ad
iOttie #ad - Universal mounting: holds all phone and case combinations from 2. 3 inches to 3. 5 inches in width. Adjustable bottom foot: the foot on the bottom of the mount cradle can be adjusted side to side, up and down, or removed entirely to hold smartphones and cases of all sizes.

The rotating ball joint allows you to view your phone in both landscape and portrait mode. Adjustable viewing: the telescopic arm extends from 4 – 6. 5 inches and pivots on 260 degree arc for a variety of mounting positions. Easy one touch lock/release: The patented Easy One Touch mechanism allows you to quickly mount and remove your phone with one hand. Strong suction: single use dashboard disc and reusable suction cup combo provide a powerful hold and superior sticking strength.
BrandiOttie #ad
ManufactureriOttie #ad
Height9 Inches
Length3 Inches
Weight0.38 Pounds
Width5 Inches
Part Number852306006596
ModelEasy One Touch 4
Warranty2 year manufacturer

6. DaJun

#ad

JunDa Car Phone Mount 360 Degree Rotation Dashboard Cell Phone Holder for Car Clip Mount Stand Suitable for 4 to 7 inch Smartphones…

#ad
DaJun #ad - And firmly hold your electric device order to prevent them from scratching and dropping. More convenient, sun visor, can be used in car dashboard, rearview mirror.

Broad compatibility: designed with a spring buckle, which can be adjusted to fit mobile phones from 4 to 7 inches. Spring buckle base can not be shaken off. 360 degree rotation, Switch between horizontal and vertical screens at your will. The phone holder can be attached to the cat dashboard or curved surface. One holder for multiple purposes. Curved base design, made with a soft, non-slip silicon pad and curved base. Strong and sturdy.
BrandDaJun #ad
ManufacturerJunDa 01 #ad
Height3.54 Inches
Length5.51 Inches
Width3.54 Inches

7. bokilino

#ad

Cup Phone Holder for Car Dashboard Windshield, Car Phone Holder Mount, Sturdy Cup Holder Phone Mount Fit with All Mobile Phones, bokilino Car Phone Mount

#ad
bokilino #ad - Ensure surface has been wiped down and cleaned before installing. Note: it is highly recommended to use the Adhesive Mounting Square included on uneven/textured surfaces. Powerful suctionequipped with a suction-cup gel pad that provides strong suction and leaves no residue behind.

Easy to installno tools necessary for installation! simply adhere base of car mount to desired surface and lock it in place. Install car mount on top of this base for the best hold. Also features a two-lock locking. The ultra-strong suction cup can be reconditioned back to its original form by rinsing the suction down with warm water and allowing it to air dry. That is convenient to navigate, pickup phone calls. Multi-function cell phone holder multiple functions car phone holder, made with best airliner PTFE material, taxis; good assistant for Uber, SUV, trucks, pickup trucks, can be mounted on dashboard windshield.

Apply to most of cars, Lyft drivers. Compatible with All Mobile Phones. Find a best view for your trip. One hand operation phone car mounpress smart touch button on the backside to open the clamps, press the button and meanwhile take off the phone, ergonomic design, which extends its working life and provides you an excellent performance; 2. The release button changed from side to back, then put your phone in and squeeze the arms to hold your phone firmly.
Brandbokilino #ad
Manufacturerbokilino #ad
Part Number5176945031

8. VANMASS

#ad

Universal Handsfree Windshield Dash Air Vent Cell Phone Holder Car, Compatible with iPhone 13 Samsung & Truck, 2021 Upgraded VANMASS Car Phone Mount Super Suction Cup Dashboard Phone Holder Stand

#ad
VANMASS #ad - Freedom² is dancing = 2 x 360°+065”+270°2 replaceable accessories1 suction cup + 1 vent clip; 360° swivel ball head; 065‘’ adjustable bottom tray; 270° rotatable telescopic arm. Holder king: guard you safe drivingthe original silicone clamps grip the mobile phone like your hand, even on bumpy roads, sharp turns, ensuring that your device will stay firmly in position, or emergency brakings.

Please use the mount on the windshield or air vent instead. Patented multi-scene design: car & bathroom & gymcomes with a patented sucker & kitchen & desk & steel-cored vent clip, video call, excels in music, movie, GPS navigation, be a perfect assistant for your life. Born with love & blessingthe 2021 version took five years to analyze the top 100 products, listen to the voice of 6, 000+ users, optimize 121 models, 500, test 168 kinds of material.

Package includes phone mount *1, suction cup *1, air vent clip *1, dashboard pad *1 Tips: The LEATHER dashboard is NOT suitable for ALL suction cups. Flexible for 99% vehicles & phones as you please. Luxury present: top-notch configuration & master-designed packageexquisite car phone mount is fully protected in the elegant & eco-friendly box. We are proud to receive the world-leading CP65/ REACH/ ROHS safe certifications.
BrandVANMASS #ad
ManufacturerVANMASS #ad
Weight0.57 Pounds
Part NumberVMEZ11CTBK1A-US-haoyijia
ModelCTEZ11
Warranty36 months warranty

9. FONKEN

#ad

Car Phone Mount, FONKEN Cell Phone Holder for Car 360 Degree Rotation Dashboard Clip Mount Car Phone Stand Compatible for iPhone 11/ 12 Pro Max XS Max XR 8 8Plus 7 Samsung Galaxy S10 S9 S8 LG And More

#ad
FONKEN #ad - The phone holder can be attached to the car dashboard or curved surface and firmly hold your device to prevent them from scratching and dropping. Multiple purposes can provide you with more convenience and more use needs in the car. Spring buckle base cannot be shaken off, strong and sturdy.

Please confirm whether this car mount is suitable for the dashboard of your vehicle before place order. ). Folding car bracketwhen not in use the car phone stand can folds flat and easily fits in a center console, or door pocket to keep it out of the way, glove box, but make you conveniently in reach when you need it.3360°rotation & 180°tiltthe upgrade car phone mount not only support 360-degree rotatable between horizontal and vertical screens at your will, but also can be 180° tilt will provide you with the best viewing angle,, so you could see the phone screen clearly and keep secure driving rather than limited by view angle.

Curved base designmade with a soft, non-slip silicon pad and curved base. Broad compatibilitydesigned with a spring buckle, compatible with iphone 12 11 pro/11 pro max/xs/xr/x/8/7, which can be adjusted to fit mobile phones from 4 to 6. 8 inches, galaxy, Moto and More other smartphone. Note: this car phone mount jaws width can be expand to 82mm/3. 2inch.
BrandFONKEN #ad
ManufacturerFONKEN #ad
Weight0.26 Pounds
Part NumberFK-YBTCZZJ-HE

10. AONKEY

#ad

AONKEY Cell Phone Holder for Car, Galaxy S10/S9 Plus S8 Note 9/8, Compatible iPhone XR XS Max X 8 7 6S Plus, LG V30, Pixel 3 XL, Dashboard Anti-Slip Vehicle GPS Car Mount Universal for All Smartphones

#ad
AONKEY #ad - Mobility: sticky silicone material is not permanent attachment to the dash. Stability: triple reinforcement on dashboard, plus a circle of adhesive silicone film and a suction cup, large silica gel base, make the phone holder grip firmly on your car.

Security: car holder made of high quality spring, make it hold the phone securely and won’t slide or fly out even taking a sharp turn, as well as two ends of clamping go with non-skip silicone, sudden stop or accelerate. Two different angels provide more choices for you to find non light reflect and clear screen view. Super compatibility: this car mount universally fits mobile phone from 3" to 7", 7, s7 edge, 6 plus, lg k20 v, 5S, S8, Galaxy Note 8, like iphone Xs, 6s plus, 8 Plus, s8 plus, xr, 7 Plus, 8, Xs Max, iphone x, 6S, SE, GPS device like Garmin etc.

Perfect driving view: thanks to its mobility, you can put the cell phone car holder at best position for your view. It can be taken off from the dash easily, and the silicone bottom become sticky as new after flush.
BrandAONKEY #ad
ManufacturerAonkey Direct #ad
Height1.18 Inches
Length5.31 Inches
Width5.31 Inches
Part NumberCH-802006BK
ModelCH-802006BKE