As an Amazon Associate I earn from qualifying purchases.
1. Pack'em #ad
Pack'em Bolt-on Stake Pocket for Trailers & Trucks Racks 10 #adPack'em #ad
- Slightly tapered for a tight fit. Supports for side Walls on Trucks & Trailers. See measurements below. 10 gauge steel - solid 1/8" thick. If you are using for 2x4 stakes, the 2x4 will need to be trimmed to wedge into the pocket for a secure fit.
2. BACKRACK #ad
Backrack 30124 Installation Hardware Kit For Backrack And Safety Rack Incl. Fasteners Stake Pocket Hardware Installation Hardware Kit #adBACKRACK #ad
- Easily mount lights or additional accessories. Constructed from 12 gauge steel. Convenient low-profile design. Convenient low-profile design. Convenient low-profile design.
Convenient low-profile design. Convenient low-profile design. Separate brackets for tonneau cover install sold here. Convenient low-profile design. Finished in a durable black powder-coat.
3. APEX LEGENDS #ad
Apex Rear-BAR-2 Universal Steel Truck Bed Rear Bar Pack of 2 #adAPEX LEGENDS #ad
- Set of two rear truck bed bars provides support and tie-down points for large loads. Adjustable to fit truck beds from 65"-69.
5" w. Durable, powder-coated steel construction. All hardware included. Universal design fits most pickup trucks; easy, no-drill installation for trucks with stake pocket holes.
|Brand||APEX LEGENDS #ad|
4. AA-Racks #ad
AA-Racks X31 Truck Rack with 8 Non-Drilling C-Clamps Pick-up Truck Utility Ladder Rack Black #adAA-Racks #ad
- The top section is built with two "t" sleeve bars plus Middle Cross Bar. The x31 features a tested loading capacity of 800 lbs.
It is powder coated in the color of black. The rope hook on the side of all four uprights provides the security for tying the tools or loads. Non-drilling x31 truck rack with black c-clamps set of 8 included, NOT COMPATIBLE with trucks with Utility Track Systems.
The double-barred middle section won't easily dent or bend, making it even stronger than a one-barred design. The extendable design also makes it compatible with different Truck-bed Width ranged from Min. 51" - max. 71".
5. Red Hound Auto #ad
4 Piece Makes 2 Corners, Red Hound Auto 4 Pc Stake Body Utility Trailer Rack Corner Connector Wood Panel Gate Side Latch Brackets Set #adRed Hound Auto #ad
- Use on tailgates and bulkheads when connecting panels at right angles. Each piece is approximately 4 in x 2-1/2 in; includes 2 left brackets and 2 right brackets.
Great for securing gates and side panels together. 4 piece corner stake Rack Connector Set; Makes 2 Corners. Constructed of rust-resistant zinc plated solid steel.
|Brand||Red Hound Auto #ad|
|Manufacturer||Red Hound Auto #ad|
|Warranty||1 year Limited|
6. Westin #ad
Westin 57-9005 Heavy Duty Ladder Rack #adWestin #ad
- Universal: the westin heavy duty ladder rack is a universal fit! Adjustable: because both pieces can be adjusted, it’s easy to carry your equipment at any height you need should clearance become an issue in parking garages or other low ceiling areas.
Materials: heavy-duty mild steel construction with powder coat finish ensures corrosion resistance and durability. Made in the usa: Proudly manufactured in the United States. Safe and secure: racks secure and remove easily to stake pocket holes on pickup truck bed.
|Manufacturer||Westin Automotive #ad|
7. Mytee Products #ad
Mytee Products 4 Pack Heavy Duty Adjustable Trailer Stake Pocket D Ring w/ 1/2" Hitch Pin, Load Limit 5400 lbs & 4 Holes for Adjustment | Stake Pocket D-Ring Tie Downs Utility for Flatbed Trucks #adMytee Products #ad
- Capacity is 16, 200 lbs. Easy-to-use: slide the stake pocket d-ring right into the stake pocket and use the ½” hitch pin to insert into the hole for your desired height and lock it into place using the cotter pin.
Precise placement: each stake pocket d-ring comes with a ½” hitch pin w/ locking cotter pin and 4 pin holes, so you can adjust the height of your Stake pocket D-ring to fit your current load.
Versatile: d-rings can be utilized as anchor points for a wide variety of hooks grab hooks, j-hooks, winch straps, S-hooks, shackles and end-fittings ratchet straps, or chain binders.
This includes common flush and outside stake pockets. Do not exceed Working Load Limit. Strong: each stake pocket d-ring has a working load limit of 5400 lbs. Fits most stake pockets: designed to be compatible with standard 2” x 4” stake pockets. Please be sure to measure before you purchase.
|Brand||Mytee Products #ad|
|Manufacturer||Mytee Products #ad|
8. HARVARDS CHROME #ad
HARVARDS CHROME 8 PC Utility Trailer Rack Wood Panel Sides Latch Corner Connector Stake Body 4 Corners #adHARVARDS CHROME #ad
- Size4" long x 2-1/2" high - 3 screw holes 5/16" diameter. Easy installationDirect Bolt On. 8 pieces wood panel connector Bracket Set, 4 left and 4 right, enough to connect 4 Corners. Durable heavy duty Steel, Zinc Coated to Prevent Rusting.
9. NIXFACE #ad
NIXFACE 8 Pc Stake Trailer Rack Corner Connector Body Utility Wood Side Bracket New #adNIXFACE #ad
- Package include:8-piece 4 corner 4 left brackets, 4 right bracketsStake Rack Connector Set Screws included. Material:heavy duty steel, zinc plated for rust and weather resistance.
Dimension:each wood side stake straight bracket is 5-1/8" long, 2-1/2" wide, with 5/16" diameter holes. Easy installation :No cutting, Install directly. Function:for tailgates and bulkheads to connect panels at right angles.
10. X-Haibei #ad
X-Haibei 8 Pack Trailer Stake Rack Corner Connector Brackets Straight Wood Sides Latch Rack Set #adX-Haibei #ad
- These brackets are simple to install. Each piece size : Long 4" Wide 2. 5". Material: Zinc plated, steel. Quanity: 8 pieces 4 pair of 90° Stake Rack Sides Latch without screws.