As an Amazon Associate I earn from qualifying purchases.
Loncaster #ad - Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, s 7 edge, samsung galaxy note 8 /9/10 /10 pro/20 ultra, Mi, Nexus, Huawei, IPAD, S 20 plus/ 8 plus / 9 plus /10 plus, LG, HTC, S20/S 8 /9 /10, Pixel, Garmin and so on.
Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on. Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, scratching or flying out whenever there is an emergency braking, it can protect phone against bumping, sudden stop and sharp turn.
AZXYI #ad - Please wait 24 HOURS to use. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield.
When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard.
15" for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. Very high bond & easy to removethese high-strength, bonding almost instantly with no drying time. Easy to useto maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
Ganvol #ad - Reusable over and over again. Unlike other poor mats being a permanent magnet for dust, the Ganvol anti slip mats can be washed when it gets dirty and leave no residue. Fed up of non slip pad or gel mat that are not sticky, smell toxic funky odor or leave gooey mess on your dash? If your loved ones ever spent a whole day to remove a gooey mess of terrible "sticky" pad with chemical breakdown or "melting" around the edges in the Texas summer, melt in the hot sun, get them one of these heat resistant on their truck console.
Cheap way to go hands free when driving and asking siri! tips: because it is super sticky, pulling the phone off sometimes brings the pad with it.
Llc 360, escort ix / xrs9370, whistler cr75 / cr90 / spx 5300 / max 360 / passport s55 / passport x70, beltronics rx65, cobra ESD7570 / XTR-130 / SPX 7800BT / XTR-145. They can even absorb shock and reduce damage to your phone if your car vibrates a lot. They are truly sticky, hud, rv counter tops, mp3 player, lipstick, purse, laser / radar detector, speakers, headsets, GPS, boat, flexible and super elastic! Strong adhesion: holds your mobile phone, keys, soft, watches, pens, glasses, bobblehead toy, coins, cigarettes, flashlight, garage door opener on your dash. You will love to have these small 5.
CrusJia #ad - Not only for the phone but also for any other electronic device! Reliable material— these mobile phone organizer holders are made ABS plastic, not easy to fade or out of shape, reliable and long-lasting, sturdy, which can be applied for a long period of time and compatible with most smartphones.
Adjustable car phone mount— the width can be adjusted arbitrarily, and the mobile phone can be placed horizontally or vertically.
Easy to use— just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation. With double-sided tape, living room, study room, bathroom, it will not fall due to lack of stickiness, bedroom, this non-slip wall mount holder is strong and durable, thus preventing the loss of items.
AONKEY #ad - Whatever reason you don't like our car phone mount, we will refund every penny or replace it without any question asked. Wide compatiblefits various dashboards include curved uneven dash surface and most device from 3” to 7” like compatible with iphone xs/xs max, Samsung Galaxy Note9, X, Note8, S7/S7 Edge, 7/7plus, S8/S8 Plus, Xr, 6S/6S plus, 6/6 Plus, 8/8 Plus, GPS device like Garmin, Google Pixel 2 XL, S9/S9 Plus, TomTom.
Stable and secure5 sticky points to ensure a strong adsorption without leaving any marks.
Environmental materialnon-toxic and tasteless silicone, heat-resistant never be melted in the high heat summer or leaving any marks on your dash. Easy use& quality assuranceeasy to operate with one hand. Adjustable rubber holders mount your phone more stably and tightly even when taking a sharp turn, sudden stop or emergency brake. Simply insert the two bases into the console pad to adjust the width optionally, convenient and practical.
Staont #ad - Elegant fashionable profile, watching movie, playing games etc. No need to install, using ergonomic 100-degree comfort angle, GM, reduce driving blind spots, Subaru, Benz, insert or remove your mobile phones much more quickly and easily, and KIA. The car phone mount also fit for pixel, sony, lg, such as iphone 13/ 13 mini/ 13 pro/ 13 pro max/12/12 pro/ 12 mini /11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 plus, Mi and other smartphones or GPS Devices.
The front roomy space of the mat holder is good for keys, coins, works perfectly as a cellphone stand in office or home for meeting, gadgets etc. Wide compatibility: this cell phone holder universally is applicable to mobile phones ranging from 3" to 7"cell phone with 6~12mm / s10 /note 8 / 023~047 inch thickness, ipad, htc, samsung galaxy s8 /s8 plus / s9 / note 9/Note10/Note 10 pro.
Stable & anti-slip: dependents on its soft silicone bottom and sticky pads it can protect phone against bumping, comfort and firmness, sudden stop and sharp turn. Vehicle mount with soft, flexible double snap design elastic contraction, scratching or flying out whenever there is an emergency braking, will not press the volume keys. Special design: gps holder for car is one-handed operation, safety accompany all the way. The bottom of the car phone holder is made from high-tech adhesives, just rinse with water and dry it, it will be the same as the new one.
CrusJia #ad - Easy to use— just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation. With double-sided tape, it will not fall due to lack of stickiness, study room, this non-slip wall mount holder is strong and durable, bedroom, living room, thus preventing the loss of items.
Widely use— for car, bathroom, etc. Not only for the phone but also for any other electronic device! Reliable material— these mobile phone organizer holders are made ABS plastic, not easy to fade or out of shape, sturdy, reliable and long-lasting, which can be applied for a long period of time and compatible with most smartphones.
Adjustable car phone mount— the width can be adjusted arbitrarily, and the mobile phone can be placed horizontally or vertically. Compatible with most smartphones. Not affect charging— leave the charging hole position, it will not affect charging during use.
OQTIQ #ad - Quick one-button release: just press the release button on the back of the cradle, clamp arms will smoothly slide to release your device, and you can easily take off your cellphones. Compatible with iphone 13/12/x/ xs/ 8 plus/ 8/ 7 plus/ 7/ 6s plus, samsung galaxy s10/ S10e/ S9/ S8, Samsung note 4/5/6/7/8/9 Google Pixel 2XL, LG G6 etc.
It’s very convenient to adjust the distance between you and the holder. With a telescopic arm, the arm can be extended from 4. 2 to 5. 8 inches. If you’re looking for a car mount that offers a little something extra, the Oqtiq phone holder is an ideal choice.
A strong suction cup securely locks on your windshield or dashboard to keep your smartphone safe and sound while you take calls and view navigation instructions. Versatile: the oqtiq car phone holder is an affordable, windshield, multi-functional car phone holder with an air vent clip and a suction cup that you can mount on your air vent, or dashboard. Enhanced sticky suction cup: keeping the phone steady while you drive is reusable gel pads that adhere to any flat or curved portion of your dashboard, and work well in hot and cold conditions.
iOttie #ad - This enables a myriad of customized viewing angles while you’re on the road. Magnetic cord organizer: Keep charging cables neatly organized with the magnetic tab located near the bottom foot.
Easy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. The mount’s arms will close automatically, holding your device securely while you drive.
Telescopic arm: the improved telescopic arm now extends from 5 inches to 8 inches as opposed to the Easy One Touch 4 which only extended to 6. 5inch and pivots 260 degrees. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button.
PKYAA #ad - Package includes6 x2. 1"53mm round sticky adhesive. Easy to removethese high-strength, and protects adhesive surfaces against scratches, bonding almost instantly with no drying time. Please do not hesitate to contact us and we will provide you our best after-sale service.
6pcs clear adhesives replacementpkyaa offers 6pcs round clear sticky adhesive padsDiameter: 2. 1"/53mm, for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. Easy to fix your car phone socket base, truck, heavy duty dashboard mount base, you can stable and secure driving uber, vehicle in bumpy roads.
You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. Please wait 24 HOURS to use. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. You can use it without worry in hot Summer. Press down repeatedly to increase the contact of the adhesive with the substrate.
1. Loncaster
#adLoncaster Car Phone Holder, Car Phone Mount Silicone Car Pad Mat for Various Dashboards, Samsung, Slip Free Desk Phone Stand Compatible with iPhone, Black, GPS Devices and More, Android Smartphones
#adMore information #ad
Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick. Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on. Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, scratching or flying out whenever there is an emergency braking, it can protect phone against bumping, sudden stop and sharp turn.
| Brand | Loncaster #ad |
| Manufacturer | Loncaster #ad |
| Height | 1.8 Inches |
| Length | 4.8 Inches |
| Weight | 0.37 Pounds |
| Width | 4.8 Inches |
| Part Number | yx-40 |
| Model | 40 |
More information #ad
2. AZXYI
#adAZXYI 6 Pack Dashboard Pad Mounting Disk Adhesive Replacement Kit, Very High Bond Sticky Adhesive, Double-Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount
#adWhen using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard.
More information #ad
Press down repeatedly to increase the contact of the adhesive with the substrate. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need. 6pcs clear adhesives replacementazxyi offers 6 pcs round clear sticky adhesive padsDiameter: 80mm, 3. 15" for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. Very high bond & easy to removethese high-strength, bonding almost instantly with no drying time. Easy to useto maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
| Brand | AZXYI #ad |
| Manufacturer | AZXYI #ad |
| Height | 0.04 Inches |
| Length | 3.15 Inches |
| Width | 3.15 Inches |
| Part Number | AZXYI-6DR |
| Model | AZXYI-6DR |
More information #ad
3. Ganvol
#adHeat Resistant, Cell Phone Dashboard Holder, Leave no Residue, Radar Detector Non-Slip Mat, Don't Stink, Ganvol 2 Pack Premium Anti-Slip Car Dash Sticky Pads 5.3 x 2.7 in
#adCheap way to go hands free when driving and asking siri! tips: because it is super sticky, pulling the phone off sometimes brings the pad with it.
More information #ad
The enclosed cable tie is a Plus. A quick solution is to simply place the edge of the your phone instead of the whole phone on the mat and that is enough to hold the phone in place. One for cell phone and the other for laser radar speed detetor ARMATE, Meter. Llc 360, escort ix / xrs9370, whistler cr75 / cr90 / spx 5300 / max 360 / passport s55 / passport x70, beltronics rx65, cobra ESD7570 / XTR-130 / SPX 7800BT / XTR-145. They can even absorb shock and reduce damage to your phone if your car vibrates a lot. They are truly sticky, hud, rv counter tops, mp3 player, lipstick, purse, laser / radar detector, speakers, headsets, GPS, boat, flexible and super elastic! Strong adhesion: holds your mobile phone, keys, soft, watches, pens, glasses, bobblehead toy, coins, cigarettes, flashlight, garage door opener on your dash. You will love to have these small 5.
| Brand | Ganvol #ad |
| Manufacturer | Ganvol #ad |
| Height | 0.31 Inches |
| Length | 5.63 Inches |
| Weight | 0.04 Pounds |
| Width | 4.33 Inches |
| Part Number | 1011960 |
| Model | 1011960 |
More information #ad
4. CrusJia
#adAdjustable Width Car Sticky Navigation Mobile Phone Bracket, 2022 Upgraded Multifunctional Mobile Phone Bracket, Self Adhesive Dashboard Mount Car Phone Holder, for All Mobile Phones 2 Pairs
#adAdjustable car phone mount— the width can be adjusted arbitrarily, and the mobile phone can be placed horizontally or vertically.
More information #ad
Widely use— for car, etc. Compatible with most smartphones. Not affect charging— leave the charging hole position, it will not affect charging during use. Easy to use— just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation. With double-sided tape, living room, study room, bathroom, it will not fall due to lack of stickiness, bedroom, this non-slip wall mount holder is strong and durable, thus preventing the loss of items.
| Brand | CrusJia #ad |
| Manufacturer | CrusJia #ad |
More information #ad
5. AONKEY
#adAONKEY Dashboard Car Pad Mat Vehicle GPS Mount Universal Fit All Smartphones, Galaxy Note 9/8 S8/S9/S10 Plus J7 J3, Compatible iPhone Xs/XS Max XR X 6S 7/8 Plus, Cell Phone Holder for Car, Pixel 3 XL
#adStable and secure5 sticky points to ensure a strong adsorption without leaving any marks.
More information #ad
Also easily removed from one place to another as new by flashed under water. 2018 upgradedcompare to old version, 5 sticky points are added at the bottom, so the holder workable on curved dashboard too. Environmental materialnon-toxic and tasteless silicone, heat-resistant never be melted in the high heat summer or leaving any marks on your dash. Easy use& quality assuranceeasy to operate with one hand. Adjustable rubber holders mount your phone more stably and tightly even when taking a sharp turn, sudden stop or emergency brake. Simply insert the two bases into the console pad to adjust the width optionally, convenient and practical.
| Brand | AONKEY #ad |
| Manufacturer | Aonkey Direct #ad |
| Height | 0.4 Inches |
| Length | 6 Inches |
| Weight | 0 Pounds |
| Width | 4 Inches |
| Part Number | CH-802011BKR |
| Model | CH-802011BKR |
More information #ad
6. Staont
#adStaont Anti-Slip Silicone Dashboard Car Pad Compatible with iPhone, KGs3 and More, Car Phone Holder, Android Smart Phones, GPS, Samsung
#adThe front roomy space of the mat holder is good for keys, coins, works perfectly as a cellphone stand in office or home for meeting, gadgets etc. Wide compatibility: this cell phone holder universally is applicable to mobile phones ranging from 3" to 7"cell phone with 6~12mm / s10 /note 8 / 023~047 inch thickness, ipad, htc, samsung galaxy s8 /s8 plus / s9 / note 9/Note10/Note 10 pro.
More information #ad
Apply to suv such as for ford, Volkswagen, it can be placed anywhere on the car's dashboard, Chevrolet, Small size. Stable & anti-slip: dependents on its soft silicone bottom and sticky pads it can protect phone against bumping, comfort and firmness, sudden stop and sharp turn. Vehicle mount with soft, flexible double snap design elastic contraction, scratching or flying out whenever there is an emergency braking, will not press the volume keys. Special design: gps holder for car is one-handed operation, safety accompany all the way. The bottom of the car phone holder is made from high-tech adhesives, just rinse with water and dry it, it will be the same as the new one.
| Brand | Staont #ad |
| Manufacturer | Staont #ad |
| Height | 1.77 Inches |
| Length | 4.72 Inches |
| Weight | 0.4 Pounds |
| Width | 4.72 Inches |
More information #ad
7. CrusJia
#adAdjustable Width Car Sticky Navigation Mobile Phone Bracket, for All Mobile Phones 1 Pair-2pcs, Multifunctional Mobile Phone Bracket, 2022 Upgraded Self Adhesive Dashboard Mount Car Phone Holder
#adWidely use— for car, bathroom, etc. Not only for the phone but also for any other electronic device! Reliable material— these mobile phone organizer holders are made ABS plastic, not easy to fade or out of shape, sturdy, reliable and long-lasting, which can be applied for a long period of time and compatible with most smartphones.
More information #ad
Adjustable car phone mount— the width can be adjusted arbitrarily, and the mobile phone can be placed horizontally or vertically. Compatible with most smartphones. Not affect charging— leave the charging hole position, it will not affect charging during use.
| Brand | CrusJia #ad |
| Manufacturer | CrusJia #ad |
More information #ad
8. OQTIQ
#adOQTIQ 3-in-1 Suction Cup Phone Holder Windshield/Dashboard/Air Vent, Compatible with iPhone, Dashboard & Windshield Suction Cup Car Phone Mount with Strong Sticky Gel Pad, Samsung & Other Cellphone
#adIt’s very convenient to adjust the distance between you and the holder. With a telescopic arm, the arm can be extended from 4. 2 to 5. 8 inches. If you’re looking for a car mount that offers a little something extra, the Oqtiq phone holder is an ideal choice.
More information #ad
Perfect flexibility: freely adjust your habitual and comfortable viewing angles due to 360 degrees of rotating ball joint. Broad compatibility: perfect for phones4-6. 8inches. You can adjust your phone at any angle without blocking your view. A strong suction cup securely locks on your windshield or dashboard to keep your smartphone safe and sound while you take calls and view navigation instructions. Versatile: the oqtiq car phone holder is an affordable, windshield, multi-functional car phone holder with an air vent clip and a suction cup that you can mount on your air vent, or dashboard. Enhanced sticky suction cup: keeping the phone steady while you drive is reusable gel pads that adhere to any flat or curved portion of your dashboard, and work well in hot and cold conditions.
| Brand | OQTIQ #ad |
| Manufacturer | OQTIQ #ad |
| Height | 3 Inches |
| Length | 6 Inches |
| Width | 3 Inches |
More information #ad
9. iOttie
#adMoto, LG, iOttie Easy One Touch 5 Dashboard & Windshield Universal Car Mount Phone Holder Desk Stand for -iPhone, Nokia, Huawei, Smartphones, Samsung
#adEasy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. The mount’s arms will close automatically, holding your device securely while you drive.
More information #ad
Mount or remove your phone in seconds with the patented Easy One Touch Mechanism. Wide compatibility: new larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size. Telescopic arm: the improved telescopic arm now extends from 5 inches to 8 inches as opposed to the Easy One Touch 4 which only extended to 6. 5inch and pivots 260 degrees. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button.
| Brand | iOttie #ad |
| Manufacturer | iOttie #ad |
| Height | 4 Inches |
| Length | 6.5 Inches |
| Weight | 0.45 Pounds |
| Width | 4.2 Inches |
| Part Number | HLCRIO171AM |
| Model | One Touch 5 |
| Warranty | 2 year manufacturer |
More information #ad
10. PKYAA
#adPKYAA 6pcs 2.1"53mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam, Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit
#ad6pcs clear adhesives replacementpkyaa offers 6pcs round clear sticky adhesive padsDiameter: 2. 1"/53mm, for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. Easy to fix your car phone socket base, truck, heavy duty dashboard mount base, you can stable and secure driving uber, vehicle in bumpy roads.
More information #ad
Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. Please wait 24 HOURS to use. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. You can use it without worry in hot Summer. Press down repeatedly to increase the contact of the adhesive with the substrate.
| Brand | PKYAA #ad |
| Manufacturer | PKYAA #ad |
| Height | 0.03 Inches |
| Length | 2.09 Inches |
| Width | 2.09 Inches |
| Part Number | PKYAA-PK6MRST |
| Model | PKYAA-PK6MRST |
More information #ad
