As an Amazon Associate I earn from qualifying purchases.
Loncaster #ad - Just rinse with water and dry it, it will be the same as the new one. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, ipad, huawei, pixel, lg, nexus, samsung galaxy Note 8 /9/10 /10 pro/20 ultra, Mi, HTC, S 20 plus/ 8 plus / 9 plus /10 plus, S20/S 8 /9 /10, S 7 Edge, Garmin and so on.
Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives.
Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, scratching or flying out whenever there is an emergency braking, it can protect phone against bumping, sudden stop and sharp turn. Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.
AZXYI #ad - When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Easy to useto maximize adhesive contact, free of contaminates. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need.
Very high bond & easy to removethese high-strength, and protects adhesive surfaces against scratches, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. And wait at least 24 hours to use after stuck.
Compatible with most suction cup dashboard mount and other windshield long arm mount, ETC, EZ Pass/I-Pass/SunPass holder, camera mount, GPS holder, wireless charger base, dash camera mount holder etc on the market.6pcs clear adhesives replacementazxyi offers 6 pcs round clear sticky adhesive padsDiameter: 80mm, 3. 15" for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. First peel off the white side of the adhesive and stick it to the car mount base. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
Ganvol #ad - They are truly sticky, laser / radar detector, coins, keys, boat, MP3 player, flexible and super elastic! Strong adhesion: holds your mobile phone, headsets, soft, cold resistant, garage door opener on your dash. No adhesive or magnet needed in your car, gps, flashlight, watches, truck, HUD, glasses, RV counter tops, cigarettes, SUV, heat resistant, lipstick, pens, speakers, purse, bobblehead toy, treadmill or gym any more.
Reusable over and over again. One for cell phone and the other for laser radar speed detetor armate, escort ix / cr90 / sPX 5300 / Max 360 / Passport X70, Beltronics RX65, Cobra ESD7570 / XRS9370, Meter. Llc 360, whistler cr75 / xtr-130 / passport s55 / spx 7800BT / XTR-145.
Cheap way to go hands free when driving and asking siri! tips: because it is super sticky, pulling the phone off sometimes brings the pad with it. Fed up of non slip pad or gel mat that are not sticky, melt in the hot sun, smell toxic funky odor or leave gooey mess on your dash? If your loved ones ever spent a whole day to remove a gooey mess of terrible "sticky" pad with chemical breakdown or "melting" around the edges in the Texas summer, get them one of these heat resistant on their truck console. They can even absorb shock and reduce damage to your phone if your car vibrates a lot.
CrusJia #ad - Not affect charging— leave the charging hole position, it will not affect charging during use. Not only for the phone but also for any other electronic device! Reliable material— these mobile phone organizer holders are made ABS plastic, reliable and long-lasting, not easy to fade or out of shape, sturdy, which can be applied for a long period of time and compatible with most smartphones.
Widely use— for car, bedroom, living room, etc. With double-sided tape, bathroom, study room, this non-slip wall mount holder is strong and durable, it will not fall due to lack of stickiness, thus preventing the loss of items. Easy to use— just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation.
AONKEY #ad - Environmental materialnon-toxic and tasteless silicone, heat-resistant never be melted in the high heat summer or leaving any marks on your dash. Stable and secure5 sticky points to ensure a strong adsorption without leaving any marks.
Whatever reason you don't like our car phone mount, we will refund every penny or replace it without any question asked. Wide compatiblefits various dashboards include curved uneven dash surface and most device from 3” to 7” like compatible with iphone xs/xs max, 7/7plus, X, 8/8 Plus, 6S/6S plus, Google Pixel 2 XL, S7/S7 Edge, Note8, S8/S8 Plus, S9/S9 Plus, 6/6 Plus, Samsung Galaxy Note9, GPS device like Garmin, Xr, TomTom.
2018 upgradedcompare to old version, 5 sticky points are added at the bottom, so the holder workable on curved dashboard too. Easy use& quality assuranceeasy to operate with one hand. Adjustable rubber holders mount your phone more stably and tightly even when taking a sharp turn, sudden stop or emergency brake. Simply insert the two bases into the console pad to adjust the width optionally, convenient and practical.
Staont #ad - Washable & reusable: rip the bottom plastic liner and the cell phone holder can be directly adhere to dashboard or smooth surfaces without any mechanical installation and will not leave any traces when removed. Elegant fashionable profile, playing games etc. No need to install, benz, Subaru, reduce driving blind spots, safety accompany all the way.
The bottom of the car phone holder is made from high-tech adhesives, just rinse with water and dry it, it will be the same as the new one. The front roomy space of the mat holder is good for keys, works perfectly as a cellphone stand in office or home for meeting, coins, watching movie, gadgets etc.
Vehicle mount with soft, scratching or flying out whenever there is an emergency braking, flexible double snap design elastic contraction, comfort and firmness, will not press the volume keys. Wide compatibility: this cell phone holder universally is applicable to mobile phones ranging from 3" to 7"cell phone with 6~12mm / s10 /note 8 / s9 / 0.23~047 inch thickness, lg, sony, htc, such as iphone 13/ 13 mini/ 13 pro/ 13 pro max/12/12 pro/ 12 mini /11/11 pro/11 pro max/ xr/ XS/ XS Max/ X/8/8 Plus/7/7 plus, ipad, Samsung Galaxy S8 /S8 Plus / Note 9/Note10/Note 10 pro.
CrusJia #ad - Compatible with most smartphones. With double-sided tape, bathroom, thus preventing the loss of items. Adjustable car phone mount— the width can be adjusted arbitrarily, and the mobile phone can be placed horizontally or vertically.
Not affect charging— leave the charging hole position, it will not affect charging during use. Easy to use— just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation.
Not only for the phone but also for any other electronic device! Reliable material— these mobile phone organizer holders are made ABS plastic, reliable and long-lasting, sturdy, not easy to fade or out of shape, which can be applied for a long period of time and compatible with most smartphones.
OQTIQ #ad - Enhanced sticky suction cup: keeping the phone steady while you drive is reusable gel pads that adhere to any flat or curved portion of your dashboard, and work well in hot and cold conditions. It’s very convenient to adjust the distance between you and the holder.
Quick one-button release: just press the release button on the back of the cradle, clamp arms will smoothly slide to release your device, and you can easily take off your cellphones.
8 inches. Versatile: the oqtiq car phone holder is an affordable, windshield, multi-functional car phone holder with an air vent clip and a suction cup that you can mount on your air vent, or dashboard. Perfect flexibility: freely adjust your habitual and comfortable viewing angles due to 360 degrees of rotating ball joint. Broad compatibility: perfect for phones4-6. 8inches. You can adjust your phone at any angle without blocking your view.
iOttie #ad - Wide compatibility: new larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size. Magnetic cord organizer: Keep charging cables neatly organized with the magnetic tab located near the bottom foot.
This enables a myriad of customized viewing angles while you’re on the road. Mount or remove your phone in seconds with the patented Easy One Touch Mechanism.
5inch and pivots 260 degrees. The mount’s arms will close automatically, holding your device securely while you drive. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button.
PKYAA #ad - You can use it without worry in hot Summer. Please do not hesitate to contact us and we will provide you our best after-sale service. Easy to fix your car phone socket base, heavy duty dashboard mount base, truck, you can stable and secure driving uber, vehicle in bumpy roads.
Package includes6 x2. 1"53mm round sticky adhesive. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads.
Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. Press down repeatedly to increase the contact of the adhesive with the substrate. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Easy to removethese high-strength, bonding almost instantly with no drying time. Please wait 24 HOURS to use.
1. Loncaster
#adGPS Devices and More, Loncaster Car Phone Holder, Black, Android Smartphones, Car Phone Mount Silicone Car Pad Mat for Various Dashboards, Samsung, Slip Free Desk Phone Stand Compatible with iPhone
#adWashable & reusable : the bottom of the car phone holder is made from high-tech adhesives.
More information #ad
Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick. Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, scratching or flying out whenever there is an emergency braking, it can protect phone against bumping, sudden stop and sharp turn. Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.
| Brand | Loncaster #ad |
| Manufacturer | Loncaster #ad |
| Height | 1.8 Inches |
| Length | 4.8 Inches |
| Weight | 0.37 Pounds |
| Width | 4.8 Inches |
| Part Number | yx-40 |
| Model | 40 |
More information #ad
2. AZXYI
#adAZXYI 6 Pack Dashboard Pad Mounting Disk Adhesive Replacement Kit, Double-Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount, Very High Bond Sticky Adhesive
#adVery high bond & easy to removethese high-strength, and protects adhesive surfaces against scratches, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. And wait at least 24 hours to use after stuck.
More information #ad
After applying some pressure on the adhesive, please clean the adhesive surface before use and let it dry, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Compatible with most suction cup dashboard mount and other windshield long arm mount, ETC, EZ Pass/I-Pass/SunPass holder, camera mount, GPS holder, wireless charger base, dash camera mount holder etc on the market.6pcs clear adhesives replacementazxyi offers 6 pcs round clear sticky adhesive padsDiameter: 80mm, 3. 15" for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. First peel off the white side of the adhesive and stick it to the car mount base. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
| Brand | AZXYI #ad |
| Manufacturer | AZXYI #ad |
| Height | 0.04 Inches |
| Length | 3.15 Inches |
| Width | 3.15 Inches |
| Part Number | AZXYI-6DR |
| Model | AZXYI-6DR |
More information #ad
3. Ganvol
#adGanvol 2 Pack Premium Anti-Slip Car Dash Sticky Pads 5.3 x 2.7 in, Heat Resistant, Don't Stink, Cell Phone Dashboard Holder, Radar Detector Non-Slip Mat, Leave no Residue
#adReusable over and over again. One for cell phone and the other for laser radar speed detetor armate, escort ix / cr90 / sPX 5300 / Max 360 / Passport X70, Beltronics RX65, Cobra ESD7570 / XRS9370, Meter. Llc 360, whistler cr75 / xtr-130 / passport s55 / spx 7800BT / XTR-145.
More information #ad
The enclosed cable tie is a Plus. A quick solution is to simply place the edge of the your phone instead of the whole phone on the mat and that is enough to hold the phone in place. The pad can be trimmed to smaller different sizes and spaces. Unlike other poor mats being a permanent magnet for dust, the Ganvol anti slip mats can be washed when it gets dirty and leave no residue. Cheap way to go hands free when driving and asking siri! tips: because it is super sticky, pulling the phone off sometimes brings the pad with it. Fed up of non slip pad or gel mat that are not sticky, melt in the hot sun, smell toxic funky odor or leave gooey mess on your dash? If your loved ones ever spent a whole day to remove a gooey mess of terrible "sticky" pad with chemical breakdown or "melting" around the edges in the Texas summer, get them one of these heat resistant on their truck console. They can even absorb shock and reduce damage to your phone if your car vibrates a lot.
| Brand | Ganvol #ad |
| Manufacturer | Ganvol #ad |
| Height | 0.31 Inches |
| Length | 5.63 Inches |
| Weight | 0.04 Pounds |
| Width | 4.33 Inches |
| Part Number | 1011960 |
| Model | 1011960 |
More information #ad
4. CrusJia
#adSelf Adhesive Dashboard Mount Car Phone Holder, for All Mobile Phones 2 Pairs, Adjustable Width Car Sticky Navigation Mobile Phone Bracket, 2022 Upgraded Multifunctional Mobile Phone Bracket
#adMore information #ad
Adjustable car phone mount— the width can be adjusted arbitrarily, and the mobile phone can be placed horizontally or vertically. Compatible with most smartphones. Widely use— for car, bedroom, living room, etc. With double-sided tape, bathroom, study room, this non-slip wall mount holder is strong and durable, it will not fall due to lack of stickiness, thus preventing the loss of items. Easy to use— just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation.
| Brand | CrusJia #ad |
| Manufacturer | CrusJia #ad |
More information #ad
5. AONKEY
#adCompatible iPhone Xs/XS Max XR X 6S 7/8 Plus, Cell Phone Holder for Car, Pixel 3 XL, Galaxy Note 9/8 S8/S9/S10 Plus J7 J3, AONKEY Dashboard Car Pad Mat Vehicle GPS Mount Universal Fit All Smartphones
#adWhatever reason you don't like our car phone mount, we will refund every penny or replace it without any question asked. Wide compatiblefits various dashboards include curved uneven dash surface and most device from 3” to 7” like compatible with iphone xs/xs max, 7/7plus, X, 8/8 Plus, 6S/6S plus, Google Pixel 2 XL, S7/S7 Edge, Note8, S8/S8 Plus, S9/S9 Plus, 6/6 Plus, Samsung Galaxy Note9, GPS device like Garmin, Xr, TomTom.
More information #ad
Also easily removed from one place to another as new by flashed under water. 2018 upgradedcompare to old version, 5 sticky points are added at the bottom, so the holder workable on curved dashboard too. Easy use& quality assuranceeasy to operate with one hand. Adjustable rubber holders mount your phone more stably and tightly even when taking a sharp turn, sudden stop or emergency brake. Simply insert the two bases into the console pad to adjust the width optionally, convenient and practical.
| Brand | AONKEY #ad |
| Manufacturer | Aonkey Direct #ad |
| Height | 0.4 Inches |
| Length | 6 Inches |
| Weight | 0 Pounds |
| Width | 4 Inches |
| Part Number | CH-802011BKR |
| Model | CH-802011BKR |
More information #ad
6. Staont
#adAndroid Smart Phones, KGs3 and More, Staont Anti-Slip Silicone Dashboard Car Pad Compatible with iPhone, Samsung, GPS, Car Phone Holder
#adThe bottom of the car phone holder is made from high-tech adhesives, just rinse with water and dry it, it will be the same as the new one. The front roomy space of the mat holder is good for keys, works perfectly as a cellphone stand in office or home for meeting, coins, watching movie, gadgets etc.
More information #ad
The car phone mount also fit for Pixel, Mi and other smartphones or GPS Devices. Apply to suv such as for ford, it can be placed anywhere on the car's dashboard, and KIA. Stable & anti-slip: dependents on its soft silicone bottom and sticky pads it can protect phone against bumping, sudden stop and sharp turn. Vehicle mount with soft, scratching or flying out whenever there is an emergency braking, flexible double snap design elastic contraction, comfort and firmness, will not press the volume keys. Wide compatibility: this cell phone holder universally is applicable to mobile phones ranging from 3" to 7"cell phone with 6~12mm / s10 /note 8 / s9 / 0.23~047 inch thickness, lg, sony, htc, such as iphone 13/ 13 mini/ 13 pro/ 13 pro max/12/12 pro/ 12 mini /11/11 pro/11 pro max/ xr/ XS/ XS Max/ X/8/8 Plus/7/7 plus, ipad, Samsung Galaxy S8 /S8 Plus / Note 9/Note10/Note 10 pro.
| Brand | Staont #ad |
| Manufacturer | Staont #ad |
| Height | 1.77 Inches |
| Length | 4.72 Inches |
| Weight | 0.4 Pounds |
| Width | 4.72 Inches |
More information #ad
7. CrusJia
#adMultifunctional Mobile Phone Bracket, 2022 Upgraded Self Adhesive Dashboard Mount Car Phone Holder, for All Mobile Phones 1 Pair-2pcs, Adjustable Width Car Sticky Navigation Mobile Phone Bracket
#adNot affect charging— leave the charging hole position, it will not affect charging during use. Easy to use— just slide in your phone, car phone holder mount clamps the phone automatically by gravity and provide the easiest operation.
More information #ad
Widely use— for car, study room, this non-slip wall mount holder is strong and durable, bedroom, it will not fall due to lack of stickiness, living room, etc. Not only for the phone but also for any other electronic device! Reliable material— these mobile phone organizer holders are made ABS plastic, reliable and long-lasting, sturdy, not easy to fade or out of shape, which can be applied for a long period of time and compatible with most smartphones.
| Brand | CrusJia #ad |
| Manufacturer | CrusJia #ad |
More information #ad
8. OQTIQ
#adSamsung & Other Cellphone, OQTIQ 3-in-1 Suction Cup Phone Holder Windshield/Dashboard/Air Vent, Dashboard & Windshield Suction Cup Car Phone Mount with Strong Sticky Gel Pad, Compatible with iPhone
#adQuick one-button release: just press the release button on the back of the cradle, clamp arms will smoothly slide to release your device, and you can easily take off your cellphones.
More information #ad
A strong suction cup securely locks on your windshield or dashboard to keep your smartphone safe and sound while you take calls and view navigation instructions. With a telescopic arm, the arm can be extended from 4. 2 to 5. 8 inches. Versatile: the oqtiq car phone holder is an affordable, windshield, multi-functional car phone holder with an air vent clip and a suction cup that you can mount on your air vent, or dashboard. Perfect flexibility: freely adjust your habitual and comfortable viewing angles due to 360 degrees of rotating ball joint. Broad compatibility: perfect for phones4-6. 8inches. You can adjust your phone at any angle without blocking your view.
| Brand | OQTIQ #ad |
| Manufacturer | OQTIQ #ad |
| Height | 3 Inches |
| Length | 6 Inches |
| Width | 3 Inches |
More information #ad
9. iOttie
#adHuawei, Nokia, Smartphones, Samsung, LG, Moto, iOttie Easy One Touch 5 Dashboard & Windshield Universal Car Mount Phone Holder Desk Stand for -iPhone
#adThis enables a myriad of customized viewing angles while you’re on the road. Mount or remove your phone in seconds with the patented Easy One Touch Mechanism.
More information #ad
Easy one touch mechanism: press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. Telescopic arm: the improved telescopic arm now extends from 5 inches to 8 inches as opposed to the Easy One Touch 4 which only extended to 6. 5inch and pivots 260 degrees. The mount’s arms will close automatically, holding your device securely while you drive. Adjustable bottom foot: You can easily and securely adjust the bottom foot by squeezing the spring button.
| Brand | iOttie #ad |
| Manufacturer | iOttie #ad |
| Height | 4 Inches |
| Length | 6.5 Inches |
| Weight | 0.45 Pounds |
| Width | 4.2 Inches |
| Part Number | HLCRIO171AM |
| Model | One Touch 5 |
| Warranty | 2 year manufacturer |
More information #ad
10. PKYAA
#adDashboard Pad Mounting Disk Sticky Adhesive Replacement Kit, PKYAA 6pcs 2.1"53mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam
#adPackage includes6 x2. 1"53mm round sticky adhesive. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads.
More information #ad
6pcs clear adhesives replacementpkyaa offers 6pcs round clear sticky adhesive padsDiameter: 2. 1"/53mm, for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. High temperature resistance sticky adhesivethese stickers have high temperature120℃+ resistance performance. Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. Press down repeatedly to increase the contact of the adhesive with the substrate. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Easy to removethese high-strength, bonding almost instantly with no drying time. Please wait 24 HOURS to use.
| Brand | PKYAA #ad |
| Manufacturer | PKYAA #ad |
| Height | 0.03 Inches |
| Length | 2.09 Inches |
| Width | 2.09 Inches |
| Part Number | PKYAA-PK6MRST |
| Model | PKYAA-PK6MRST |
More information #ad
