Top 10 Synergy Tie Rod – Automotive Replacement Tie Rod Ends

As an Amazon Associate I earn from qualifying purchases.

1. Synergy Manufacturing

#ad

Synergy Jeep JK Heat Treated Tie Rod 8002

#ad
Synergy Manufacturing #ad - Strongest jeep JK Tie Rod on the market! Made from 1 3/8" 4130 chromoly and heat Treated for maximum strength - 200% stronger than stock tie rod. Bent similar to factory bar to clear sway bar mounts. Synergy double adjuster Sleeve: allows adjustment of tie rod length without removing it from the vehicle. Heavy duty tie rod for Jeep JK Wranglers.
BrandSynergy Manufacturing #ad
ManufacturerSynergy Manufacturing #ad
Height3 Inches
Length62 Inches
Weight15.85 Pounds
Width6 Inches
Part Number8002
Model8002

2. Synergy Manufacturing

#ad

Synergy Manufacturing 4131-L Tie Rod End

#ad
Synergy Manufacturing #ad - Fully greasable sintered metal on metal bushing design has high wear resistance. Two are required for Synergy 8001 and 8002. Note: these only work with Synergy Manufacturing Steering. Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface. Boots are made from tear/wear resistant black NBR and come with retaining springs.
BrandSynergy Manufacturing #ad
ManufacturerSynergy Manufacturing #ad
Height5 Inches
Length7 Inches
Width5 Inches
Part Number4131-L
Model4131-L

3. Synergy Manufacturing

#ad

JL/JLU/JT Steering Stabilizer Relocation Kit by Synergy MFG 1 1/2" Dia. Synergy Tie Rod

#ad
Synergy Manufacturing #ad - 1. 5 inch clamp for attaching stabilizer to the Synergy JL Tie Rod. Replaces axle side track bar mounting bolt. Required when using synergy 8802-01 JL Tie Rod to mount a steering stabilizer. Low profile stabilizer mounting stud prevents interference with Synergy upgraded steering components.
BrandSynergy Manufacturing #ad
ManufacturerSynergy Manufacturing #ad
Part NumberJL/JLU/JT SS Relocation Kit

4. Synergy Manufacturing

#ad

13+ 3500 4x4, Synergy Manufacturing 8702-01 Heavy Duty Tie Rod RAM Truck 14+ 2500 4x4

#ad
Synergy Manufacturing #ad - Fits: ram truck 14+ 2500 4x4, 13+ 3500 4x4. Over 40% stronger than the stock tie rod. Steering stabilizer Clamp 8703-01 required to retain steering stabilizer. Tie rod bolts right into the factory mounts with no additional wheel requirements. Tie rod is cnc formed from 1. 75 inch x. 188 wall seamless chromoly tubing and heat treated after forming.
BrandSynergy Manufacturing #ad
ManufacturerSynergy Manufacturing #ad
Part NumberSYN-8702-01

5. Southwest Speed

#ad

2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018, NEW CURRIE CURRECTLYNC STEERING SYSTEM,COMPATIBLE WITH 07-18 JEEP WRANGLER JK,DRAG LINK,TIE ROD

#ad
Southwest Speed #ad - This kit is completely bolt-on and includes a heavy duty steering stabilizer shock mounting kit. The currie currectlync steering system for the jeep jk wrangler features a 1 1/2" diameter tube tie rod, 1 1/2" diameter solid forged drag link, forged tie rod ends and premium jam nuts & adjuster. Brand new currie jeep wrangler JK Currectlync Steering System Part #JK-9704. Fits: 2007-2018 jeep Wrangler JK.
BrandSouthwest Speed #ad
ManufacturerCurrie Enterprises #ad
Part NumberCUR-JK-9704

6. MOOG Chassis Products

#ad

Moog ES800223 Tie Rod End

#ad
MOOG Chassis Products #ad - Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. Rigorous testing -- comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on.

Greaseable socket -- reduces corrosion and wear by allowing new lubricant to flush contaminants. Comprehensive coverage -- available for foreign and domestic nameplates. Absorbs impact -- belleville preload washer helps keep the bearing package tight as bearings wear. Problem solver gusher bearing -- metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.

Strong and durable – ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. Restores like-new steering -- patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life.
BrandMOOG Chassis Products #ad
ManufacturerFederal Mogul #ad
Height2.8 Inches
Length9.8 Inches
Weight1 Pounds
Width4.6 Inches
Part NumberES800223
ModelES800223
WarrantyLimited Warranty

7. MOOG Chassis Products

#ad

Moog ES3609 Tie Rod End

#ad
MOOG Chassis Products #ad - Restores like-new steering -- patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life. Fits select 2000 - 2003 Chevy. Absorbs impact -- belleville preload washer helps keep the bearing package tight as bearings wear.

Problem solver gusher bearing -- metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life. Outer rod. Rods are greasable to reduce friction. Made of durable, all metal construction. Strong and durable – ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.

Greaseable socket -- reduces corrosion and wear by allowing new lubricant to flush contaminants. Rigorous testing -- comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on. Easy to install. Comprehensive coverage -- available for foreign and domestic nameplates.
BrandMOOG Chassis Products #ad
ManufacturerFederal Mogul #ad
Height2.63 Inches
Length9.75 Inches
Weight1.73 Pounds
Width4.5 Inches
Part NumberES3609
ModelES3609

8. Supreme Suspensions

#ad

Carbon Steel Adjustable Tie Rod for 2007-2018 Jeep Wrangler, Supreme Suspensions

#ad
Supreme Suspensions #ad - Technical notes: Corrects and Prevents Oscillation In The Driveline. Contents: 1x carbon Steel Adjustable Tie Rod and Installation Instructions.

For proper use, 4-1/2" wheel back spacing or less is recommended. Fitment: 2007 - 2018 jeep wrangler JK 2WD 4WD. Benefits: replaces your worn out tie rod with our superior carbon steel tie rod. Carbon steel is used due to its higher strength, durability and resistance to bending. Aftermarket wheel spacers can help solve this problem, especially on factory wheels. Installation: easy bolt-on installation takes 1 to 2 hours. Your wheels must not have more than 4-3/4" backspace or the Tie Rod can come in contact with the wheels.
BrandSupreme Suspensions #ad
ManufacturerSupreme Suspensions #ad
Part NumberAZM T92

9. MOOG Chassis Products

#ad

MOOG Chassis Products ES3488 Tie Rod End

#ad
MOOG Chassis Products #ad - Rods are greasable to reduce friction. Easy to install. Wrench flats on housing and stud provide easy installation and alignment adjustment. Loose or worn chassis parts can lead to premature tire wear. Stud design is optimized to provide ideal stud swing and strength for each application. Fits 1999 - 2001 Silverado trucks. Assembled in the USA. Made of durable, all metal construction. Engineered to meet or exceed OE part performance.
BrandMOOG Chassis Products #ad
ManufacturerFederal Mogul #ad
Height1.8 Inches
Length0.6 Inches
Weight1.45 Pounds
Width1.2 Inches
Part NumberES3488
ModelES3488
WarrantyLimited Warranty

10. Fox

#ad

Fox Racing 983-02-070 2.0 Performance ATS Steering Stabilizer 07-16 Jeep Wrangler Stock & 1 3/8" Tie Rod

#ad
Fox #ad - Zinc-plated and double-clear Coated for long lasting finish. 2. 0" smooth bore and honed seamless alloy Bodies. Race-developed High-Flow piston design.
BrandFox #ad
ManufacturerFox #ad
Height40.1 Inches
Length2.75 Inches
Weight5 Pounds
Width5.75 Inches
Part Number983-02-070
Model983-02-070