Top 10 Toe Plates Alignment – Tire Repair Tools

As an Amazon Associate I earn from qualifying purchases.

1. Tenhulzen Automotive


Made in USA, Tenhulzen Automotive Toe Plates Wheel Alignment Tool, Most Accurate Toe Plates on The Market

Tenhulzen Automotive #ad - Everything snaps together for easy storage and transport, no case needed. Degree alignment specs can be used thanks to the attached degree to inch conversion chart. Package includes 2 high resolution tape measures with 1/32in increments. Measurements are taken from the wheel rim itself, NOT the tire like other toe plates. Specially cut slots will not let the ends of the tape measures fall out while in use.
BrandTenhulzen Automotive #ad
ManufacturerTenhulzen Automotive #ad
Height8 Inches
Length2 Inches
Width23.5 Inches
Part Number2200

2. Zackman Scientific


With Conversion Chart and Storage Bag, Zackman Performance Car Alignment Toe Plates with Kick Out Bottom, Slots with Angled Tip for Measuring Tape Placement

Zackman Scientific #ad - Degree conversion chart- degree alignment specifications in Inches and Millimeters on Plates and Manual. Universal fit- 23.

5" wide by 7. 12" tall, high grade lightweight Anti-rust Aluminum with Padded Tape on Backside to Prevent Toe Plate and Rim Scratching. Tape measurer- included are two 2 Zackman Scientific Tape Measurers. Carry bag- store toe plates and measuring Tape in the Carry Bag Included for Better Organization and Transport. Angled tape holder slot- traditional straight tape holder as well as Slotted Angled Tape Holder Slots to Prevent Tape Measurer from Sliding Out During Operation.
BrandZackman Scientific #ad
ManufacturerZackman Scientific #ad
Part NumberZATPSET

3. Longacre


Longacre Racing 79501 Aluminum Toe-In Plates w/Magnets

Longacre #ad - The longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place. Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.

Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures included. The dimensions of the longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments. These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
BrandLongacre #ad
ManufacturerLongacre #ad
Height2 Inches
Length25 Inches
Weight5.7 Pounds
Width10 Inches
Part Number52-79501

4. Tenhulzen Automotive


All-in-one Camber/Caster/Toe Plates, Tenhulzen Automotive 2-Wheel Alignment Tool, Made in USA

Tenhulzen Automotive #ad - Expensive turn plates Are NOT Needed for Caster Measurment. All-in-one tool measures camber, Caster, AND Toe! Patent pending wheel stand-offs provide unparalleled accuracy. Detailed, step by Step Video Instructions. Camber accurate to Within 01 degrees much better than a bubble gauge.
BrandTenhulzen Automotive #ad
ManufacturerTenhulzen Automotive #ad
Height2.25 Inches
Length23.5 Inches
Weight5.88 Pounds
Width9.8 Inches
Part Number3300

5. QuickCar Racing Products


QuickCar Racing Products 64-704 Aluminum Toe Plate Set

QuickCar Racing Products #ad - Country of Origin : United States. Fit type: Vehicle Specific. Package weight: 3. 26 kilograms. Package dimensions: 61. 2 h x 11. 5 l x 26. 4 w centimetres.
BrandQuickCar Racing Products #ad
ManufacturerQuickCar Racing Products #ad
Height4.6 Inches
Length10.9 Inches
Weight4.5 Pounds
Width24 Inches
Part Number64-704
Warranty90 day



HECASA DIY Toe Plates Wheel Alignment Tool High Grade Aluminum

HECASA #ad - High quality made from high quality brushed aluminum sheet, with more functionality and durability. Rust protection coating, lengthen the using life span. Fitment hecasa toe plates wheel alignment set was designed for car and SUV.

Practical toolprovide help for adjusting toe after replacing suspension components tie rods, hitting a pothole, checking toe after going off track, etc. Adjusting alignment to you personal desired specifications, etc. Package content1 x toe plates wheel alignment set, 2 x high resolution tape measures with 1/32 in increments, 1x degree to inch conversion chart.

If you have a lifted/4x4 vehicle with larger than stock off-road tires, or a commercial vehicle, the tire sidewall may be too tall for this DIY alignment tool. Designfeatures specially crafted slots, has been proved through tests that the ends of the tape measures won’t fall out when you using it.
BrandHECASA #ad
ManufacturerHECASA #ad
Part NumberNN64

7. Zackman Scientific


Free Transition Bridges & Thrust Blocks Inclusive Pair, Zackman Scientific Wheel Alignment Tool Turn Plates, Turnable with 4 Ton Capacity

Zackman Scientific #ad - Slide tolerance- the 13-3/8" top rotating plates Allows a 2" Slide Tolerance for Wheels that Moves Up or Down when Turning. Perfect for garage or pit box- at 15.

75" x 15. 75" and 37lbs, the pair of alignment turn plates is perfect for any garage or auto shop. Four ton capacity- each turn plate supports up to 2 tons of Weight Capacity, Allowing up to 4 Tons of Weight when used in Pairs. Bonus accessories- each turn plate set comes with two 2 Bonus Small Wheel Chocks and Two 2 Bonus Plastic Turners. Brass finish dial- the beautiful brass finish dial allows up to 45 Degrees Left or Right from Centerline Rotation Allows up to 360 Degrees.
BrandZackman Scientific #ad
ManufacturerZackman Scientific #ad
Part NumberZAWG008

8. Allstar


Allstar ALL10119 Aluminum Deluxe Toe Plate, Pair

Allstar #ad - Made from high quality aluminum material. It is a deluxe set. Sold as one pair. It has a 90 day limited warranty. It is 9 inch tall x 23 inch wide.
BrandAllstar #ad
ManufacturerAllstar Performance #ad
Height0.9 Inches
Length19.8 Inches
Weight4.28 Pounds
Width8.9 Inches
Part NumberALL10119
Warranty90 day



Aluminum Automotive Toe Plates Set Car Wheel Alignment Kit DIY Tool Gauge Camber Caster Accurate

KUAFU #ad - However, if you are unsatisfied with either way, you have No-Questions-Asked, 30-DAY Money-Back Guarantee. Made of high quality aluminum. Pat.

Buy with confidence. 100% satisfaction guarantee:we are sure you will love our high quality products. The slots were specially crafted, it has been proved through tests that the ends of the tape measures won’t fall out when you using it. This toe plates diy wheel alignment tool/gauge is for cars and SUV. Everything snaps together for convenient storage and transport, no extra case needed. Pending wheel stand-offs provide extremely accurate measurements. Considerate online video instructions written instructions available for download as well.
BrandKUAFU #ad
ManufacturerKUAFU #ad
Part NumberBLET535-Z2

10. JEGS


JEGS Aluminum Toe Plates | Made In USA | 24” x 9” x 0.120” thick | Includes Two Toe Plates And Two Tape Measures

JEGS #ad - Made in usa with high quality materials and assembly. A must have tool for checking toe and alignment to prevent uneven tire wear or erratic handling while driving. Dimensions 24” x 9” x 0120” thick. Includes 2 toe plates and 2 tape measures. Easy to use by just propping one up against each front tire and then measuring.
BrandJEGS #ad
ManufacturerJEGS #ad
Height30.4 Inches
Length10.4 Inches
Weight8 Pounds
Width4.4 Inches
Part Number81680