Top 10 Truck Bed Covers FORD F150 – Truck Tonneau Covers

As an Amazon Associate I earn from qualifying purchases.

1. Tyger Auto

#ad

Tyger Auto T3 Soft Tri-Fold Truck Bed Tonneau Cover for 2015-2020 Ford F-150 Styleside 5.5' Bed TG-BC3F1041

#ad
Tyger Auto #ad - Limited lifetime ! | important: please measure your truck bed size before ordering. Cover is dual-coated and made out of heavy duty 24oz marine-grade vinyl, with aircraft-grade aluminum frames, and comes with stainless steel clamps for easy installation and great durability.

Easy no drilling installation with instruction and mounting hardware provided. Us design Patented. Pre-assembled horizontal crossbars offer support and conveniently fold up with the cover providing full bed access when needed. We accept returns; however customer will assume the return shipping cost if ordered wrong. Note: small holes will need to be cut in the bed liner for vehicles equipped with over-the-bedrail bed liner to secure the clamps for proper cover installation; cover will work with under-the-bedrail bed liner without modification.
BrandTyger Auto #ad
ManufacturerTyger Auto #ad
Height2.13 Inches
Length70.52 Inches
Weight29.01 Pounds
Width23.91 Inches
Part NumberTG-BC3F1041
ModelTG-BC3F1041
WarrantyLifetime

2. Gator Covers

#ad

Gator EFX Hard Tri-Fold Truck Bed Tonneau Cover | GC24019 | fits 2015-2020 Ford F-150 5' 5" Bed | MADE IN THE USA

#ad
Gator Covers #ad - Weather protection | this hard folding truck bed cover comes equipped with an integrated water management system to keep the rain, snow, dirt and dust out of your truck bed. Perimeter rubber seals and inner drain tubes carry water away from and out of the bed, providing superior protection from the elements.

Tough truck bed protection | the gator efx hard tri-fold is constructed of heavy-duty aluminum panels that automatically lock when closed, UV-protective, providing a level of security only found in hard folding tonneau covers; Panels are coated with a scratch-resistant, black powder coat finish. Fits ford f-150 5' 7" bed 67. 1". Easy install & low-profile design | the efx tonneau cover can easily be installed in less than 30 minutes, without the use of tools or need for drilling; The truck bed cover mounts to the inside of the truck bed rails allowing the cover to sit flush with your truck bed, providing a stylish low-profile look.

Fit type: Vehicle Specific. 3-year warranty | the gator efx hard folding cover is backed by a 3-year warranty, and supported by our US-based customer service team; If anything goes wrong with your cover, Made in the USA, our tonneau cover experts are at your service and ready to help.
BrandGator Covers #ad
ManufacturerAX5H7 #ad
Height5.75 Inches
Length32.75 Inches
Width69.75 Inches
Part NumberGC24019
ModelGC24019
Warranty3 Years

3. Tyger Auto

#ad

Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover for 2015-2020 Ford F-150 Styleside 5.5' Bed TG-BC1F9029

#ad
Tyger Auto #ad - Small holes will need to be cut for vehicle equipped with Over-the-Bedrail bedliner to secure the clamps; Works with Under-the-Bedrail bedliner without modification. We accept returns, however customer will assume the return shipping cost if ordered wrong.

Tyger limited lifetime warranty! please measure your truck bed size before ordering. Also comes with adjustable tension system on the end of the side rails to keep the cover tight and wrinkle free. Easy no-drilling installation with the provided instruction and hardware. Apply front seal strip provided to the front bed rail to seal the gap. Seals with velcro strip on the sides and secures with latch lock system at the tailgate. Comes with dual coated 24oz marine grade vinyl top, heavy duty aluminum powder coated side rails and clamps.

Built-in horizontal crossbars offer support when cover is lying flat and roll up with the cover providing full bed access. Some species truck models have lower front bed rail. Cover appears a little short : make sure side rails are positioned properly, not too far from the tailgate, Move the whole cover assembly towards the tailgate, while making sure it's properly sealed at the front.
BrandTyger Auto #ad
ManufacturerTyger Auto #ad
Height2.92 Inches
Length73.39 Inches
Weight25.04 Pounds
Width7.53 Inches
Part NumberTG-BC1F9029
ModelTG-BC1F9029
WarrantyLifetime

4. DNA MOTORING

#ad

DNA MOTORING TTC-HARD-015 Truck Bed Top Hard Solid Tri-Fold Tonneau Cover,Black

#ad
DNA MOTORING #ad - Adjustable tension for the perfect fit. Increases trucks aerodynamics at speed. Locking strap to secure cover while folded up and driving. Rubberized edges to seal; easy to install With included clamps. Black powdercoated aluminum plating.
BrandDNA MOTORING #ad
ManufacturerDNA MOTORING #ad
Part NumberTTC-HARD-015
ModelTTC-HARD-015
WarrantyContact the seller directly for warranty information for this product

5. X XCOVER

#ad

Xcover Low Profile Hard Folding Truck Bed Tonneau Cover, Compatible with 2015-2020 F150 Pickup 5.6 Ft Styleside Bed

#ad
X XCOVER #ad - Well protect your cargos: xcover low profile hard tri-fold tonnneau cover is designed to perform in the most extreme conditions, windy or sunny, premium UV resistant and cold resistant, rainy, no matter snowy, your cargos on the bed will be well protected from moisture and dirt.

Hard panel is scratch resistant and provides maximum theft protection. 5 years warranty: against defects in materials and workmanship under its intended use, Please be assured to use our tonneau cover, any questions, please contact our customer service. Durable & easy installation: solid core hard panels can be rated up to 500lbs of evenly distributed weight. Please see the video on the left for installation, it is completely assembled for easy No-Drilling installation in minutes.

Unique clamping system & theft protection: patent pending rail and latch design, Xcover latch allows for one-finger release to open and locks automatically when you close the cover. Xcover is low profile and sit inside of truck bed, full stake pockets available to be used with the cover on. Fitment: fit 2015-2019 f150 pickup, 5. 6ft styleside bed.
BrandX XCOVER #ad
ManufacturerXcover #ad
Part Number243062

6. Syneticusa

#ad

Syneticusa Aluminum Retractable Low Profile Waterproof Tonneau Cover for 2004-2020 F-150 F150 5.5' 5'6" Short Truck Bed

#ad
Syneticusa #ad - Need to drill holes for drainage tubes. Low-profile patented design; Incredibly strong and easy to use. Constructed of strong, salt, aluminum slats and powder coated in a matte, textured black finish to protects your truck bed from rain, snow, leaves and more. Hardware, such as mounting bracket and Bolts are included, and total installation is around 30 minutes. Uv protected; no Fading, No Maintenance. Lockable in any position; Secures your valuable cargo or stays open whenever and wherever you need it.
BrandSyneticusa #ad
ManufacturerSyneticusa #ad
Part NumberTCR-F15004-5.5
WarrantyLimited Lifetime Warranty

7. MaxMate

#ad

MaxMate Soft Roll Up Truck Bed Tonneau Cover Compatible with 2009-2014 Ford F-150 | Styleside 5.5' Bed

#ad
MaxMate #ad - Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions. Cover is dual-coated and made out of heavy duty 24oz. Marine-grade vinyl, with built-in horizontal crossbars that offer support when cover is lying flat; and roll up with the tarp to provide full bed access when in need.

10-year no-hassle warranty! | important: Please measure your truck bed length before ordering! We accept returns; however customer will assume the return shipping cost if ordered wrong. Easy no drilling installation with instruction and mounting hardware provided. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.

Seals with velcro strip on the sides and secures with latch lock system at the tailgate. Note: small holes will need to be cut in the bedliner for vehicles equipped with over-the-bedrail bedliner to secure the clamps for proper cover installation; cover will work with under-the-bedrail bedliner without modification. Us design Patented.
BrandMaxMate #ad
ManufacturerMaxMate #ad
Part NumberTCF169022
Warranty10 Year

8. LEER

#ad

Sturdy, LEER ROLLITUP | Compatible with 2015+ Ford F-150 with 5.6' Bed | Soft Roll Up Truck Bed Tonneau Cover | 4R112 | Low-Profile, Easy 15-Minute Install Black

#ad
LEER #ad - Our side rails and clamps are made of 6063 aluminum, which is corrosion-resistant. No-drill installation – with an easy and fast installation process, our ROLLITUP comes with the tools and instructions to install your tonneau in minutes. Leer lifetime warranty – when you buy a leer product, you’re simply buying the best.

Built to last – our cover is made out of heavy-duty – 24 ounce tear-resistant, marine-grade vinyl, with built-in crossbars that offer support when the cover is lying flat. Please check your specific vehicle with Amazon's Garage fitment. Each rollitup cover uses velcro brand hook & loop strip on the sides, the ROLLITUP allows you the ability to have full access to your bed, opening and closing your cover is easy! Fits perfect/easy to latch – our rollitup tonneau cover has an easy to latch mechanism that closes at the end of the tailgate.

We back our products with a Limited Lifetime Warranty. 100% bed access – when you’re ready to access your bed, without the removal of your tonneau. The rollitup fits perfectly on your truck bed rails! Each cover also has an adjustable tension system, keeping your ROLLITUP tonneau tight and wrinkle-free in any weather condition.
BrandLEER #ad
ManufacturerLEER #ad
Part Number4R112

9. Lyon cover

#ad

Lyon cover 5.5ft 67.1 inches Hard Tri-Fold Truck pickup Bed for 2015-2021 F150 Tonneau Cover | LED Lamp | 3 Years Warranty |

#ad
Lyon cover #ad - Fitment:2015-2019 f-150 5. 5'/67. 1"; not for models with Factory Utility Track Sys. Material:1. 5 mm frp, 15mm pp honeycomb. Hardness of frp ≧ 30hba. Tensile strength of frp ≧ 80mpa. Bending strength of frp ≧ 150mpa.

Compressive strength of PP Honeycomb ≧ 1. 4mpa. Bending strength of PP Honeycomb ≧ 05mpa. Load-bearing capacity of Sheet Metal ≧ 350pounds. ;. Simply fold from front and back, then lift up and off to gain full use of truck bed. Install:easy install, no drilling need. Lightweight design permits easy removal and reinstall. High-quality:protect your cargo from the elements & theft with this premium bed cover, snow proof and dirt proof, waterproof, Keeps Truck Bed Dry and Secure.

Electrophoretic treatment, make the hardware more corrosion-resistant, ensuring a superior durability. Roll Bar. Item-offered:hard tri fold tonneau cover x 1; aluminum buckle x 2; triangle nut x 2; wrench x 4; bag buckle x 2; LED Lamp x 1; Instructions; Waterproof Adhesive Tape;x 2; Wrench x 4; Bag Buckle x 2; LED Lamp x 1; Instructions; Waterproof Adhesive Tape;.
BrandLyon cover #ad
ManufacturerLyon cover #ad
Height26.77 Inches
Length70.08 Inches
Weight61.55 Pounds
Width5.31 Inches
Part NumberLYCH015

10. MOSTPLUS

#ad

MOSTPLUS Quad Fold Soft Truck Bed Tonneau Cover On Top Compatible for 2015-2020 FORD F150 F-150 Bed Fourth Fold Styleside 5.5 FT Feet Bed

#ad
MOSTPLUS #ad - Truck bed compatible for: 2015-2020 ford f-150, Only for Styleside 5. 5' feet bed 67, 1 inch. 1 pcs of stick Touch Lamp Included. Installation manual included.

It has 4 horizontal crossbars to avoid air lifting issue. Easy installation, all required harness are included. Please measure your truck bed length and make sure you have the correct model before ordering! High quality with 3 mounting point: quad fold truck bed is made by double sided tear-resistant vinyl with 3 heavy duty aluminum powder coated frames. No drilling and Further modification. Waterproof & uv resistant: this tonneau cover can be washed with soap and water, Keeps your equipment inside your bed dry.
BrandMOSTPLUS #ad
ManufacturerMOSTPLUS #ad
Part NumberM32101