Top 8 12 Volt Switch Surface Mount – Automotive Replacement Pushbutton Switches

As an Amazon Associate I earn from qualifying purchases.

1. Jtron

#ad

Jtron Car DIY Switches Water Drop Shape Push Button Switches Off/ON DC 12V AC 250V/6A 125V/10A 12v Surface Mount Switch for Fog Lights,DRL,LED Light Bar,etcCable:19.6"in

#ad
Jtron #ad - Electric wire: 1sq approximately 19. 6"in 39. 3"in 78. 7"in long. Water drop shape Paste Type Button Switch. Terminal Type: Wire Leads. Poles: spst - push on - push off ac 250v/6a 125V/10A. Work on any ac 250v/6a 125V/10A electrical system.
BrandJtron #ad
ManufacturerJtron #ad
Height1.18 Inches
Length0.9 Inches
Width0.66 Inches
Part Number04010074
Model04010074

2. DXX

#ad

DXX 2pcs Car Rocker Switch ON/Off Double-Sided Adhesive Installation Surface Mount 12v Push Button Switch led pods Power Switches LED Light Strip Switch Voltage 24V 110V 230V 3A 5A 10A High Current

#ad
DXX #ad - Easy installation: double-sided adhesive paste installation, will not damage the original structure; Note: please clean the installation position before installation, then paste installation.

Lead wire: awg18 wire, withstand peak current 10A, black parallel wire, total length about 50CM, easy to hide.2pcs rocker switch, maximum 10a/12v, use power supply 7a/12v, the current will decrease, the higher the voltage, voltage range: 0-220V, OFF/ON, 220V is less than 3.55a current. Design: small size, does not occupy much space, rectangular design, sensitive keys, will not be triggered by mistake. Application: car light switch, motorcycle light switch, ship light switch, low-power electrical switch.
BrandDXX #ad
ManufacturerDXX #ad
Height0.79 Inches
Length1.57 Inches
Width1.18 Inches
Part NumberSW0304

3. JIANFA

#ad

JIANFA Car Push Button Switch DIY Switch Off/ON Universal DC12V Switch for Fog Driving Lights neon Lights LED Light bar etc.

#ad
JIANFA #ad - Water drop shape paste type diy button switch, does not occupy much space, Small size rocker switch, rectangular design, sensitive keys, will not be triggered by mistake. Easy installation: double-sided adhesive paste installation, will not damage the original structure; Note: please clean the installation position before installation, then paste installation.

Easy to controll the circuit power off/on. Please pay attention to the voltage before ordering to make sure the button switch can work successfully in your area. Attached with black, white &black leads Length: approximately 18. 5"in. Application: car light switch, ship light switch, motorcycle light switch, low-power electrical switch. Use power supply 7a/12v, maximum 10a/12v, the current will decrease, the higher the voltage, voltage range: 0-220V, 220V is less than 3.5a current.
BrandJIANFA #ad
ManufacturerJIANFA #ad
Height0.78 Inches
Length1.22 Inches
Weight0.05 Pounds
Width0.98 Inches
Part NumberJIANFA026

4. JIANFA

#ad

JIANFA Car DIY Switch Paste Type Rocker Switch Off/ON Universal DC12V Switch for Fog Driving Lights neon Lights LED Light bar etc. Black

#ad
JIANFA #ad - Electric current:16A Paste Type DIY Switch. Easy to controll the circuit power on/off. Voltage:12v. Universal 12v switch for car fog/driving lights, neon lights, LED light etc. Please pay attention to the voltage before ordering to make sure the button switch can work successfully in your area. Attached with black, white, red leads Length: approximately 16"IN.
BrandJIANFA #ad
ManufacturerJIANFA #ad
Height1.6 Inches
Length5.1 Inches
Width4.3 Inches
Part NumberJIANFA1989

5. Switchtec

#ad

Switchtec 4 or 6 Gang Rocker Toggle Switch 12V Panel w/Quick Charge 3.0 USB Charger & Voltmeter, RED or Blue Led. All are Pre-Wired in Surface Mount Box Enclosure. Blue 6 SWITCHES

#ad
Switchtec #ad - Application is endless. Splash-proof panel face, water resistance caps and anti-seepage rubber ring. It's made of powder coated metal box with bracket that can rotate 360 degrees. Built-in official qualcomm smart chip, meanwhile, Over-current and Short Circuit Protection to ensure charging safety, built-in Smart IC ensures the circuit won't be burnt out if wrong wiring.

Blue led light indicator, waterproof board,. Led voltage display built in digital blue led battery voltage monitor, dispalys the real-time accurate voltage status of your vehicle's battery for preventing problems caused by low voltage, the light also makes quick and easy to find USB ports in the dark or at night, .

Box dimensions are 3. 917” x 2. 7” x 8. 67” refer to picture above for detail dimensions. Quick charge 3. 0designed with dual usb ports supporting qc 3. 0, will intelligently detect your devices and simultaneously charging 2 devices at optimal current. This gives it more flexibility for different mount locations. This allows it to be mounted either on the dash board, under dashboard, or middle console.
BrandSwitchtec #ad
ManufacturerSwitchtec #ad

6. Taiss

#ad

Taiss Car Paste Type Switch SPST Water Drop Shape DIY Car Switch with Blue LED Light Illuminated DC 12V On/Off Surface Push Button Rocker Switch for Car Various Lamps LightsCable:23.6" FH016

#ad
Taiss #ad - Wiring instructions: connecting wires include red, black and yellow wires, the positive pole of equipment and appliances is connected to the yellow wire, the red wire is connected to the positive pole of input power supply, the black wire is connected to the negative pole of input power supply, and the negative pole of equipment and appliances is connected to the black wire or the negative pole of vehicle power supply.

Electric wire: automobile low-voltage wire, long 60cm/24";Withstand temperature:-40℃ to +105℃. Package contents: 1x diy button switch. If there are quality problems, you can send us email. Switch color: black; total size:42. 8mmx30mmx23mm/1. 7"x1. 2"x09"l*w*h;. We willSend you new ones. Product name:diy paste type switch; dc12v/10A 24V/5A Blue Illuminated 2 Position Switch.
BrandTaiss #ad
ManufacturerTaiss #ad
Part NumberSW-Hz-Bu-60cm

7. TWTADE

#ad

TWTADE Paste Type Switch Car Push Button Switch ON/Off DC12V Surface Mount Switch Water Drop Shape DIY Car Switch SPST Rocker Switch with 11.8" Cable for Various Lamps and Lanterns H-013-30CM

#ad
TWTADE #ad - Voltage & current: 9a 12v/24v/110vuse at less than 100 watts;. Material: plastic and metal;. Product name:Push button switch;Color: Black;. Switch head size:1. 66'' x 1. 1'' x 1'';wire length: 11. 8'';. Package: 1 x black Push Button Switch with Wire Lead.
BrandTWTADE #ad
ManufacturerTWTADE #ad
Part NumberHZCX-X30MM

8. BONATECH

#ad

DIY AUTO Switch Paste Type Button Switches Off/ON DC 12V 200mA Double Sided with Adhesive Tape

#ad
BONATECH #ad - Electric wire: 02sq length: 30cm ; LED Light Color: White. One year warranty. Paste type button Switch, double sided with adhesive tape. This product use for dc 12v car, please do Not Use in The Car Except for DC12V. Off/on dc 12v/200ma diy car switch. Your satisfaction is our priority, any questions about our item, feel free to contact us.
BrandBONATECH #ad
ManufacturerBONATECH #ad
Weight0.04 Pounds
Part NumberPaste Type Button Switch