Top 9 2.5 inch Inlet 5 inch Outlet Exhaust TIp – Automotive Replacement Exhaust Pipes

As an Amazon Associate I earn from qualifying purchases.

1. COLT EXHAUST

#ad

Angle Cut Stainless Steel Exhaust Tip 2.5" Inlet 5" Outlet 17"

#ad
COLT EXHAUST #ad - Easy to install. Polished Angle cut. Weld on tips that will not rust. Made of high quality Stainless steel which is anti-corrosive.
BrandCOLT EXHAUST #ad
ManufacturerColt Exhaust #ad
Height5 Inches
Length17 Inches
Width5 Inches
Part Number518steel

2. WESDON

#ad

Exhaust Tip 5.00" Dia X 12.00" Long 2.50" Inlet Bolt On Rolled Slant Polished Stainless Steel W50012-250-BOSS-RS Wesdon Exhaust Tip

#ad
WESDON #ad - Bolt on style fits a Exhaust Pipe 2. 50 inlet. 2. 50 inch inlet 5. 00 inch dia 12. 00 in long rolled Slant Bolt On Exhaust Tip. Slant angle Round Edge. 5. 00 inch diameter 12. 00 inches Long. Polished to Mirror Finish Stainless Steel.
BrandWESDON #ad
ManufacturerWesdon #ad
Height5 Inches
Length12 Inches
Weight2 Pounds
Width5 Inches
Part NumberW50012-250-BOSS-RS

3. WESDON

#ad

Exhaust Tip 2.50" Inlet 5.00" Outlet 12.00" Long Slant Chrome Wesdon Exhaust Tip

#ad
WESDON #ad - Exhaust tip 2. 50" inlet 5. 00" outlet 12. 00" long. Fits a 2. 50 exhaust pipe 2. 50 inlet 5. 00 inch Outlet. Polished chrome plated Please measure to make sure it fits your Truck. Slant Angle Cut. Weld or clamp on style 2. 50" inlet.
BrandWESDON #ad
ManufacturerWesdon #ad
Height5 Inches
Length12 Inches
Weight6 Pounds
Width5 Inches
Part NumberWCR50012-250-S
ModelWCR50012-250-S
WarrantyWesdon Industries LLC warrants OUR manufactured exhaust products to buyers of our products only against defects in craftsmanship and materials for one (1) year from the date of sale. All Performance mufflers carry a limited warranty. Expansion is guaranteed only to 1/4 inch over the original neck size. . Warranty does not apply to any manufactured products that have been subject to misapplication, abuse, misuse, normal wear, negligence, backfire damage, accidents, burnout due to poor carburetion, and rust out. This warranty does not cover any labor charged or any other claims incidental to replacing a defective part. Warranty is limited to the replacement of a defective product ONLY. A final decision as to whether a product is defective will be made by Wesdon Industries after an evaluation of the product. To obtain service under this warranty, call our customer service representative

4. RP Remarkable Power

#ad

Fit for 2.5 Inch Inlet 2x4"x3" Outlet 10" Overall Length Stainless Steel Clamp on Dual Round Angle Exhaust Tip Tailpipe Duo Layer 2.5"X4"X3"X2 X10 EXT48, RP Remarkable Power

#ad
RP Remarkable Power #ad - Size: 2. 5 inch inlet, 12 inch overall lehgth, 4 inch outlet, 100% Brand New Exhaust Tip. Function: exhaust waste gas, Reduce Pressure and Noise, Filter the waste gas to reduce pollution.

Material: made by high quality stainless steel, polish stainless surface, light weight, heat-resisting, anti-corrosion and decorate appearance. Installation style: bolt on design, angled Cut 20 degree, duo layer, Rolled Edge. Note: if you think it isn’t tight enough, additional welding will be a nice safeguard. Important note: installation instruction is not included, professional help in installation may be needed.
BrandRP Remarkable Power #ad
ManufacturerMotorDexon #ad
Part NumberRP_EXT48_G1

5. UPOWER

#ad

2PCS, Upower 2.5 Inch Inlet Diesel Exhaust Tip 2.5" to 4" Exhaust Tailpipe 5" Long Double Wall Stainless Steel Weld-On Round Slant Tailpipe Tips 2.5" x 4" x 5

#ad
UPOWER #ad - 1 year warrantyno instruction is included. So be sure to measure the tailpipe. 2, be sure the outlet size of the new tip will clear these cut-outs to avoid any damage or having to trim your body panels.

Dimension2. 5 inch inlet diameter;4 inch outlet diameter;5 inch Overall Length. Professional installation is highly recommended. How to choose1, the inlet size of exhaust tip must match the diameter of your existing tailpipe for a proper fit. Designweld on - double Wall - Slant Angle Cut. 3, make sure to choose a tip that's long enough to vent the exhaust from under your vehicle, Many automobiles have bumper and cowling cut-outs for factory exhaust tips, but short enough to keep it looking cool. Durable and anti-corrosive, protect the original tips from Sun and Rain, avoid rusting and deformation. Materialhigh quality stainless steel mirror polished.
BrandUPOWER #ad
ManufacturerPartssquare #ad
Part Number193701

6. LCGP

#ad

2.5 Inch Inlet Exhaust Tip,2.5" x 4" x 12" Polished Exhaust Tailpipe Tip for Truck With Bolt On Design

#ad
LCGP #ad - Polished surface treatment and Rolled Edge & Angled Cut design. 2. 5 inch inside diameter inlet, 4 inch outside diameter outlet, 12 inch overall length. There are a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust. Note: if you think it isn’t tight enough, additional welding will be a nice safeguard. Made of high quality Stainless steel with strong anti-corrosive, Never Rusty. Easy to install: bolt on installation, not easy to screw off.
BrandLCGP #ad
ManufacturerLCGP #ad
Height9 Inches
Length21 Inches
Width12.5 Inches
Part Number254012RACB

7. LCGP

#ad

5" Overall Length, Double Wall Design, LCGP 2.5" to 4" Diesel Exhaust Tip

#ad
LCGP #ad - Protect your original pipe from the sun and rain, avoid rusting and deformation. Made of high quality T304 stainless steel for long-lasting durability. Tip style: angled cut - rolled Edge, Surface Finished : Polished. Installation type: Weld-on. 2. 5" inlet 4" outlet ; 5" Overall Length Diesel Exhaust Tip. Professional installation is recommended.
BrandLCGP #ad
ManufacturerLCGP #ad
Height4 Inches
Length5.5 Inches
Width4 Inches
Part Number254005DAC

8. Upower

#ad

Upower Pack of 2 Exhaust Tip 2.5 inch Inlet 4 inch Outlet 9" Long 304 Stainless Steel 2.5" to 4" Diesel Exhaust Tailpipe Tip Double Wall Slant Cut

#ad
Upower #ad - Before to buy, please make sure the Brand Logo "Upower". Pack of 2 exhaust tips; Professional installation is highly recommended; No instruction included. Fits: to ensure proper fit make sure your exhaust INLET diameter is 2. 5 inch. There is 1 year warranty for each purchase. Materials: made of 304 Stainless steel has very strong anti-corrosive, Never Rusty. Weld on installation and Double Wall Slant design.
BrandUpower #ad
ManufacturerPartsSquare #ad
Height4.72 Inches
Length10.24 Inches
Weight4.29 Pounds
Width9.06 Inches
Part Number184290
Warranty1 Year

9. KEDAKEJI

#ad

KEDAKEJI Blue Burnt Exhaust TIp 2PCS 2.5" Inlet 4" Outlet 9" Long 2 1/2" to 4"Tailpipe Weld on 304 Stainless Steel Exhaust Tailpipe with Slant Cut Weld on Design

#ad
KEDAKEJI #ad - The surface is electroplated with flame blue, which makes your vehicle look more shiny. Exhaust tailpipe tip made of 304 Stainless steel Single layer flat mouth, welding has very strong anti-corrosive, electroplating flame blue, high quality.

Warranty: the exhaust tailpipe tip will come with 30 days hassle-free return & 1 year unlimited replacement PROMISE. Please note that to ensure proper fit make sure your exhaust INLET diameter is 2. 5 inch. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain. Materials: kedakeji pack of 2 exhaust tips. Size: the tailpipe tip is 2.

5 inches in inlet, 4 inches in outlet and 9 inches in length. If you don't like it, just return it and get a full refund, All we wanna do is to make you love KEDAKEJI products. Function: the kedakeji exhaust tailpipe tip is used as a a protection to your vehicle’s exhaust pipes with an outlet diameter of 4 inches. Design: kedakeji tailpipe is made of stainless steel to avoid rust and corrosion.
BrandKEDAKEJI #ad
ManufacturerKEDAKEJI #ad
Part NumberK70002TE
ModelK70002TE