Tripp Lite 1.9kW Single-Phase ATS / Switched PDU with LX Platform Interface, 120V Outlets 16 5-15/20R, 2 L5-20P / 5-20P 12ft 120V Inputs, 1U Rack-Mount, TAA PDUMH20ATNET

Tripp Lite PDUMH20ATNET - Protocols supported include http, ssh, smtp, telnet, snmpv3, snmpv1, SNMPv2, FTP, HTTPS, DHCP and NTP. Switched pdu features include individually controllable output receptacles and built-in network interface. On-board ats processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.

It supports 10/100 mbps auto-sensing for optimum communication with an Ethernet network. Tripp lite switched ats / auto Transfer Switch provides a redundant power option for single-corded network devices. Enables redundant A/B power option for single-corded network devices. 1u horizontal rackmount; 2 l5-20p / 5-20P inputs; 16 5-15/20R outlets.

Tripp Lite 1.9kW Single-Phase ATS / Switched PDU with LX Platform Interface, 120V Outlets 16 5-15/20R, 2 L5-20P / 5-20P 12ft 120V Inputs, 1U Rack-Mount, TAA PDUMH20ATNET - The ats will normally maintain continuous output to all outlets as derived from the primary input cable. The java-free lx platform html5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. Built-in lx Platform network management interface card.

Dual input cords support separate connection to PRIMARY and SECONDARY power sources. 2-year limited warranty. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable.

More information about Tripp Lite PDUMH20ATNET

Tripp Lite UPS Web Management Accessory Card, Remote Monitoring, SNMP, HTML5, SSH, Telnet or Web Browser WEBCARDLX

TRIPP LITE WEBCARDLX - Its built-in stretching bracket allows it to fit perfectly on the Surface kickstand. The rj45 gigabit ethernet connection complies with IEEE 802. 3, 802. 3u and 802. 3ab standards and supports IEEE 802. 3az energy efficient ethernet, jumbo frames, as well as full- and half-duplex operations, Wake-on-LAN, VLAN tagging and auto-MDIX.

Supports multiple protocols, snmpv3, including ipv4, ipv6, HTTPS, telnet, smtp, HTTP, SNMPv2c, snmpv1, ssh, FTP and DHCP.2-year Limited Warranty. The usb 3. 0 ports achieve data transfer speeds up to 5 Gbps without compromising signal quality. It’s compatible with all Surface models and versions. The u342-hgu3 usb 3.

Tripp Lite UPS Web Management Accessory Card, Remote Monitoring, SNMP, HTML5, SSH, Telnet or Web Browser WEBCARDLX - 0 docking station expands the capabilities of your microsoft Surface or Surface Pro by adding Gigabit Ethernet access, and up to three USB peripherals, such as a printer, a 4K-enabled HDMI monitor, scanner and external hard drive. You can also stream movies, video games and other video content from your Surface device to a larger 4K-enabled television or monitor.

Then connect an hdmi cable sold separately between the u342-hgu3 and the television or monitor to see UHD video resolutions up to 3840 x 2160 4K x 2K @ 24/25/30Hz. They’re backward compatible with previous USB generations. No software or drivers are needed.

More information about TRIPP LITE WEBCARDLX


Similar products



Tripp Lite 1.4kW Single-Phase ATS / Switched PDU with LX Platform Interface, 120V outlets 8 5-15R, 2 5-15P 120V 12ft Inputs, 1U Rack-Mount, TAA PDUMH15ATNET

Tripp Lite PDUMH15ATNET - Individually switched outlets; Two digit visual current meter. Supports 1u rackmount installation in a 2 or 4 post racks. 5-15p optional-use dual cords for auto-transfer switching ATS option. Installed web/network monitoring card enables remote power monitoring and control. Supports notification and logging of input power status, event notification, output power and PDU loading conditions.

Single phase 15a 120v auto Transfer Switch / ATS PDU. Load ramping and shedding provides automatic power management to any type of network configuration. Outlets are sequentially turned on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup.

Remotely displays status of input power, load capacity, and outlet power condition via secure network or web browser interface. Federal trade agreements Act / TAA Compliant for GSA Schedule purchases. Included are 8 nema 5-15R outlets and two 12 ft. Built-in java-free lx platform interface for 24/7 remote access.

Tripp Lite 1.4kW Single-Phase ATS / Switched PDU with LX Platform Interface, 120V outlets 8 5-15R, 2 5-15P 120V 12ft Inputs, 1U Rack-Mount, TAA PDUMH15ATNET - Ptripp lites 120v 15a metered pdu system with automatic Transfer Switching ATS is an 8 outlet PDU with a digital display to indicate total PDU power consumption in amps. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices.

The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection.

More information about Tripp Lite PDUMH15ATNET


Similar products



Coleman Cable 90208802 090208802 Generator Cord Adapter from 5-15P to L5-20R 9 in, 12/3 Gauge, Yellow

Coleman Cable 90208802 - Practical generator extension cord adapter: this generator adapter cord converts a standard 15-amp grounded receptacle to a 20-amp receptacle with a quick twist. Rugged generator cord adapter: the jacket of the generator extension cord adapter protects it from the elements and sun exposure; the molded connectors are made of impact-resistant material, so this generator adapter cord is great for industrial uses.

Makes any compatible tripp lite ups system, PDU or cooling unit a managed network device via SNMP, web, SSH or Telnet. Remotely monitors site electrical data, UPS self-test logs, alert logs and logged power events like blackouts, brownouts and overvoltage conditions. Reboots locked network equipment without disrupting power to other loads when used with controllable outlets or remotely switchable outlets on select devices.

Coleman Cable 90208802 090208802 Generator Cord Adapter from 5-15P to L5-20R 9 in, 12/3 Gauge, Yellow - Individually switched outlets; Two digit visual current meter. Single phase 15a 120v auto Transfer Switch / ATS PDU. 2-year limited warranty. Federal trade agreements Act / TAA Compliant for GSA Schedule purchases. Easy-to-use generator power cord adapter: simply twist the 15a U-ground plug to lock into the 20a receptacle; lets you convert any plug quickly; the bright yellow jacket of the generator cord adapter increases visibility to minimize tripping incidents.

This product is manufactured in china.

More information about Coleman Cable 90208802


Similar products



Tripp Lite 2.9kW Single-Phase ATS / Switched PDU, LX Platform Interface, 120V Outlets 24 5-15/20R, 1 L5-30R 2 L5-30P, 2 10ft Cords, 2U Rack-Mount, TAA PDUMH30ATNET

Tripp Lite PDUMH30ATNET - OptionalenviroSense2 modules sold separately provide a variety of environmental monitoringcapabilities. Built-in java-free lx platform interface for 24/7 remote access. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. Our company strives to deliver strong performance every day!

Single phase 30a 120v auto transfer switch / ATS PDU; Highly reliable Solid State Switching. Generator extension cord adapter specifications: 9 in 23 cm long; 12 gauge; 3 conductors; 600 volts; UL listed and meets OSHA specifications. Built-in lx Platform network management interface card. Ats functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications.

Tripp Lite 2.9kW Single-Phase ATS / Switched PDU, LX Platform Interface, 120V Outlets 24 5-15/20R, 1 L5-30R 2 L5-30P, 2 10ft Cords, 2U Rack-Mount, TAA PDUMH30ATNET - 2u rackmount, 2 l5-30p inputs, 25 switched outlets 24 5-15/20R, 1 L5-30R.2-year limited warranty. The ats will normally maintain continuous output to all outlets as derived from the primary input cable. Switched pdu features include individually controllable output receptacles and built-in network interface.

Practical generator extension cord adapter: this generator adapter cord converts a standard 15-amp grounded receptacle to a 20-amp receptacle with a quick twist. Enables fault tolerant, hot-swappable ups protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system.

Supports multiple protocols, including ipv4, ssh, https, snmpv1, ipv6, telnet, smtp, SNMPv2c, HTTP, snmpv3, FTP and DHCP.

More information about Tripp Lite PDUMH30ATNET


Similar products



CableRack 2 Meter LC to LC Single Mode Fiber 9/125 Fiber Patch Cable 5-Pack

CableRack 7545891968 - 1u horizontal rackmount; 2 nema 5-15P inputs; 8 NEMA 5-15R outlets. You'll find other sellers mistakenly referring to this cable at OS2, however this cable is actually OS1. Os1 is for shorter lengths between network devices. Our company strives to deliver strong performance every day! Single phase 30a 120v auto transfer switch / ATS PDU; Highly reliable Solid State Switching.

Satisfaction guaranteed: a leader in a wide variety of electrical cord products, surge protectors, garden lights, bulk electrical and electronic wire, timer products and other accessories. Single mode fiber cable is commonly used between LX and LH SFP optics for both 1GB and 10GB interconnects. Only corning glass is used in cablerack brand singlemode fiber lc to lc fiber jumpers.

Single mode fiber patch cables compatible with both 1GB and 10GB 1310nm and 1550nm wavelength applications. Single mode patch cable solutions from cablerack have been deployed at businesses large and small, in government and defense applications. Our lc lc fiber cable are standard OFNR riser rated zipcord with yellow jacketing.

CableRack 2 Meter LC to LC Single Mode Fiber 9/125 Fiber Patch Cable 5-Pack - The glass fiber insde OS1 and OS2, however is identical. All cablerack fiber optic patch cable lc to lc are fully tested and each package includes the output test results including insertion and DB loss, so you be sure your LC singlemode patch cable meets the highest quality standards. Single phase 15a 120v auto Transfer Switch / ATS PDU.

More information about CableRack 7545891968


Similar products



CyberPower OR500LCDRM1U Smart App LCD UPS System, 500VA/300W, 6 Outlets, AVR, 1U Rackmount

Cyber Power OR500LCDRM1U - Fiber patch cable single mode is immune to electrical interference and provides Ethernet connectivity up to 10GB. No other lc fiber jumper will provide the reliable connectivity of the CableRack brand. Enables redundant A/B power option for non-redundant network devices. These sm fiber patch lc have the ultra Physical Contact UPC type polish on the connectors which is an industry standard for single mode LC patch cable connectivity.

Built-in java-free lx platform interface for 24/7 remote access. Single mode fiber patch cables compatible with both 1GB and 10GB 1310nm and 1550nm wavelength applications. Single mode patch cable solutions from cablerack have been deployed at businesses large and small, in government and defense applications.

CyberPower OR500LCDRM1U Smart App LCD UPS System, 500VA/300W, 6 Outlets, AVR, 1U Rackmount - Built-in lx Platform Network Interface. Multifunction lcd screen - provides runtime in minutes, battery status, power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime. A rackmount ups with line interactive topology, workgroup servers, the CyberPower Smart App LCD OR500LCDRM1U provides battery backup using simulated sine wave output and surge protection for department servers, workstations, network devices, and telecom installations without active PFC power supplies.

Single phase 15a 120v auto Transfer Switch / ATS PDU. These fiber cable lc lc fiber patch cables are made with the most common polarity, which is Type A to B Crossover Most Common for Duplex Patch Cords. 2u rackmount, 2 l5-30p inputs, 25 switched outlets 24 5-15/20R, 1 L5-30R.

More information about Cyber Power OR500LCDRM1U


Similar products



AC Infinity Vented Cantilever 2U Universal Rack Shelf, for 19" equipment racks. Heavy-Duty 2.4mm Cold Rolled Steel, 100lbs Capacity.

AC Infinity AI-RTB7 - 1u horizontal rackmount; 2 nema 5-15P inputs; 8 NEMA 5-15R outlets. The glass fiber insde OS1 and OS2, however is identical. All cablerack fiber optic patch cable lc to lc are fully tested and each package includes the output test results including insertion and DB loss, so you be sure your LC singlemode patch cable meets the highest quality standards.

Satisfaction guaranteed: a leader in a wide variety of electrical cord products, bulk electrical and electronic wire, surge protectors, garden lights, timer products and other accessories. Vent design maximizes airflow and prevents hot spots, while maintaining structural integrity. Practical generator extension cord adapter: this generator adapter cord converts a standard 15-amp grounded receptacle to a 20-amp receptacle with a quick twist.

Individually switched outlets; Two digit visual current meter. Fits into all standard 19" racks and cabinets, and takes 2U or 2RU of space. These fiber cable lc lc fiber patch cables are made with the most common polarity, which is Type A to B Crossover Most Common for Duplex Patch Cords. Os1 is for shorter lengths between network devices.

AC Infinity Vented Cantilever 2U Universal Rack Shelf, for 19" equipment racks. Heavy-Duty 2.4mm Cold Rolled Steel, 100lbs Capacity. - These sm fiber patch lc have the ultra Physical Contact UPC type polish on the connectors which is an industry standard for single mode LC patch cable connectivity. We carry lc single mode patch cables in a varienty of lengths and connector options in our Amazon store. Enables redundant A/B power option for single-corded network devices.

More information about AC Infinity AI-RTB7


Similar products



Ubiquiti Networks UAP-AC-PRO-US Unifi 802.11ac Dual-Radio PRO Access Point 4 Items

Ubiquiti Networks UAP-AC-PRO-US - Contractor grade generator cord adapter: this generator extension cord adapter is suitable for rugged industrial applications such as operating circular saw, heater and table saw. 2u rackmount, 25 switched outlets 24 5-15/20R, 2 l5-30p inputs, 1 L5-30R.2-year limited warranty. Output: 120 vac ± 10%. 3-year warranty - including batteries, 000 connected equipment Guarantee, $300, FREE PowerPanel Business Edition Management Software Download.

Fits all 19" racks and cabinets to hold various IT, network, and AV equipment. Vent design maximizes airflow while maintaining structural integrity. 100 pound weight capacity, up to 80% more than other cantilever rack shelves. Heavy-duty 2. 4mm thick sPCC cold rolled steel construction. 2u height, includes 10-32 screw, 16" deep, washer, and cage nut set.

Qty 4 3 dual-band antennas, 3 dBi each. Our lc lc fiber cable are standard OFNR riser rated zipcord with yellow jacketing. 500va/300w battery backup uninterruptible power supply ups System - This simulated sine wave UPS with line-interactive topology uses Automatic Voltage Regulation AVR to protect against undervoltages and overvoltages.

Ubiquiti Networks UAP-AC-PRO-US Unifi 802.11ac Dual-Radio PRO Access Point 4 Items - 6 nema 5-15r outlets: 4 battery backup and surge protected outlets - 2 surge protected outlets, input: plug type 15a nema 5-15P 10 FT Cord Plug Style- Straight. Multifunction lcd screen - provides runtime in minutes, power conditions, battery status, alerting users to potential problems before they can affect critical equipment and cause downtime.

More information about Ubiquiti Networks UAP-AC-PRO-US


Similar products



Cisco SPA504G 4-Line IP Phone with 2-Port Switch, PoE and LCD Display, Silver, Grey Power Supply not Included

CISCO SYSTEMS - ENTERPRISE 677F266 - You'll find other sellers mistakenly referring to this cable at OS2, however this cable is actually OS1. Fiber patch cable single mode is immune to electrical interference and provides Ethernet connectivity up to 10GB. Networking interface: 2 10/100/1000 Ethernet Ports. Power consumption: 9W. Single mode fiber patch cables compatible with both 1GB and 10GB 1310nm and 1550nm wavelength applications.

Single mode patch cable solutions from cablerack have been deployed at businesses large and small, in government and defense applications. Multifunction lcd screen - provides runtime in minutes, power conditions, battery status, alerting users to potential problems before they can affect critical equipment and cause downtime.

Cisco SPA504G 4-Line IP Phone with 2-Port Switch, PoE and LCD Display, Silver, Grey Power Supply not Included - Federal trade agreements Act / TAA Compliant for GSA Schedule purchases. These fiber cable lc lc fiber patch cables are made with the most common polarity, which is Type A to B Crossover Most Common for Duplex Patch Cords. 1u horizontal rackmount; 2 nema 5-15P inputs; 8 NEMA 5-15R outlets. Enables redundant A/B power option for single-corded network devices.

Individually switched outlets; Two digit visual current meter. Wi-fi standards: 802. 11 a/b/g/n/ac.

More information about CISCO SYSTEMS - ENTERPRISE 677F266


Similar products



Black - HDMI to VGA, 2 Pack, Moread Gold-Plated HDMI to VGA Adapter Male to Female for Computer, Desktop, Laptop, PC, Monitor, Projector, HDTV, Chromebook, Raspberry Pi, Roku, Xbox and More

Moread HDMI2VGA-A-B-2 - Simply click on our brand name above to view all available products. Single mode lc to lc fiber patch cable solutions are critical to high speed network solutions in the datacenter. You'll find other sellers mistakenly referring to this cable at OS2, however this cable is actually OS1. Important notes - not compatible with blu-ray player and low-power HDMI devices such as SONY PlayStation 4, Mac mini, Apple MacBook Pro with Retina Display, and Apple TV.

1u horizontal rackmount; 2 nema 5-15P inputs; 8 NEMA 5-15R outlets. Practical generator extension cord adapter: this generator adapter cord converts a standard 15-amp grounded receptacle to a 20-amp receptacle with a quick twist. Wi-fi standards: 802. 11 a/b/g/n/ac. Our company strives to deliver strong performance every day!

Black - HDMI to VGA, 2 Pack, Moread Gold-Plated HDMI to VGA Adapter Male to Female for Computer, Desktop, Laptop, PC, Monitor, Projector, HDTV, Chromebook, Raspberry Pi, Roku, Xbox and More - Single phase 30a 120v auto transfer switch / ATS PDU; Highly reliable Solid State Switching. Max. Single phase 15a 120v auto Transfer Switch / ATS PDU. Remote management: Requires optional RMCARD205. Provides battery backup and surge protection for department servers, workstations, network devices, workgroup servers, and telecom installations without active PFC power supplies.

Power consumption: 9W.

More information about Moread HDMI2VGA-A-B-2


Similar products