WindyNation 100W 100 Watt 12V Bendable Flexible Thin Lightweight Monocrystalline Solar Panel Battery Charger for RV, Boat, Cabin, Off-Grid

WindyNation SOL-100FV-01 - The solar panel weighs approximately 4 pounds and utilizes highly efficient monocrystalline solar cells. The solar panel arrives ready for installation with 36 inches of 12 AWG solar cable leads and MC4 Connectors pre-attached. Semi-flexible: the panel can be flexed to a maximum of 30 degrees. Suitable for outdoor use in all weather conditions.

Extremely light weight and efficient. Six evenly spaced metal grommet mounting holes are available to attach fasteners. Ultra-thin: solar pane is only 01 inches thick. The solar panel and junction box are completely water resistant. This allows the panel to be flush mounted to curved surfaces like RV's, tents, campers, sailboats, etc.

WindyNation 100W 100 Watt 12V Bendable Flexible Thin Lightweight Monocrystalline Solar Panel Battery Charger for RV, Boat, Cabin, Off-Grid - The panel can also be mounting using adhesive or Velcro. Blocking diode is included in the junction box to eliminate battery discharge/draining at night. See photo gallery for technical specifications data sheet. The panel is easy to transport and mount, which is ideal for mobile applications. Very easy to mount.

More information about WindyNation SOL-100FV-01

BougeRV MC4 Connectors Y Branch Parallel Adapter Cable Wire Plug Tool Kit for Solar Panel

BougeRV ISE002FBM - The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable single core cable Section: 1. 5mm² -- 6mm². Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V.

Specification: insulation material: ppo rated current: 20a4mm²) rated voltage: dc1000v contact resistance: ≤5mΩ insulation resistance: >500mΩ Operating Temperature range: -40℃ until+90℃ Degree of Protection: IP67 Flame Class: UL94-V0 Safety Degree: Ⅱ Suitable Single Core Cable Section: 1.

BougeRV MC4 Connectors Y Branch Parallel Adapter Cable Wire Plug Tool Kit for Solar Panel - 5mm² -- 6mm² include awg14, awg11, awg12, awg13, awg10 package included: 1 pair of y branch MC4 Solar Panel Cable Connectors Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male.

More information about BougeRV ISE002FBM


Similar products



BougeRV 20 Feet 10AWG Solar Extension Cable with MC4 Female and Male Connector Solar Panel Adaptor Kit Tool 20FT Red + 20FT Black

BougeRV ISE004 - Extends and locks built-in cables. Two cables with mc4 connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller. The wiring is weatherproof and designed to withstand extreme heat and cold. Solar panel cable is typically sold in 14, 12 and 10 awg sizes. Specifications: length: 20 feet one pair Wire Gauge: 10AWG Rating Voltage: -DC :1.

8kv -ac: 06~1kv degree of protection: ip65 fire rated: iec60332-1 temperature: -40~﹢90℃ Normal Cross Sectional Area of the Conductor mm2: 6. 0 service life: >25 years( -40~﹢90℃) package included: one pair 1 piece black + 1 piece red 20 feet 10AWG MC4 CableNoteOnly one end has an mc4 connector, which convenient for you to cut cable to adjustment length Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male.

BougeRV 20 Feet 10AWG Solar Extension Cable with MC4 Female and Male Connector Solar Panel Adaptor Kit Tool 20FT Red + 20FT Black - One pair 1 piece black + 1 piece red 20 Feet 10AWG Solar Extension Cable. Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V. The solar panel cable offered in this listing is 10 AWG which is the largest diameter of the three.

The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable single core cable Section: 1.

More information about BougeRV ISE004


Similar products



Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat

Link Solar #201809213LS - Extends and locks built-in cables. Two cables with mc4 connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller. The wiring is weatherproof and designed to withstand extreme heat and cold. Solar panel cable is typically sold in 14, 12 and 10 awg sizes. One pair 1 piece black + 1 piece red 20 Feet 10AWG Solar Extension Cable.

Made with copper. Using large diameter cable minimizes power loss in your solar panel system. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. Link solar abs solar cable entry gland is used for the passing of cables into the Motorhome, from the Solar panel, or for use on yachts /boats for cable entry from the mast.

Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat - Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc. The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion.

Suitable single core cable Section: 1. 5mm² -- 6mm². It can also be used for other installations and structures such as buildings, garages, sheds and other roofs Manufactured by Link Solar Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male.

More information about Link Solar #201809213LS


Similar products



RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect

Renogy 5MC4 - This is to ensure the long term durability. Renogy mc4 male/female solar panel cable connectors five pairs of mc4 solar panel cable connectors ten silver plated copper rated current: 30A Wiring size range: 10, 12 AWG contact resistance: contact material: silver plated copper insulation material: PA/pc warranty information 1-year material warranty.

Description renogy cable connectors are made with highest quality materials. You can feel that they are heavier & sturdier than other similar products in the market.

More information about Renogy 5MC4


Similar products



Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors

TOOL-MC4 TOOL-MC4 - This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. These connectors are designed to complete a solar panel PV array, typically in parallel applications. Extends and locks built-in cables. Two cables with mc4 connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller.

The wiring is weatherproof and designed to withstand extreme heat and cold. Solar panel cable is typically sold in 14, 12 and 10 awg sizes. Hard plastic. 100% compatible with Renogy MC4 connectors. One pair 1 piece black + 1 piece red 20 Feet 10AWG Solar Extension Cable. Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V.

Renogy MC4 Tool Assembly and Disassembly Tool Solar Panel Cable Crimping Tool for Male/Female MC4 Connectors - For breaking connections after they have already been locked together. Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male. Using large diameter cable minimizes power loss in your solar panel system. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables.

The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors.

More information about TOOL-MC4 TOOL-MC4


Similar products



BougeRV 30 Feet 10AWG Solar Extension Cable with MC4 Female and Male Connector Solar Panel Adaptor Kit Tool 30FT Red + 30FT Black

BougeRV ISE031 - Main technical specification: -Rated Current:20A -Rated Voltage: DC1000V. Using large diameter cable minimizes power loss in your solar panel system. Pg7 waterproof cable gland used for all cable types 2mm² to 6mm² in Dia, Widely used for solar project when routing the cables. One pair 1 piece black + 1 piece red 30 Feet 10AWG Solar Extension Cable.

. Suitable for most round cables for Solar Panel, satellite, DC power, Air conditioning, Aerial, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, 291, dicor sealant, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc. The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals.

BougeRV 30 Feet 10AWG Solar Extension Cable with MC4 Female and Male Connector Solar Panel Adaptor Kit Tool 30FT Red + 30FT Black - The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable single core cable Section: 1. 5mm² -- 6mm². Using large diameter cable minimizes power loss in your solar panel system. Extends and locks built-in cables. Hard plastic. An ideal way for routing the cables while mounting solar panels on vehicles and boats, garages, as well as other installations on buildings, sheds etc.

More information about BougeRV ISE031


Similar products



20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Display 12V/24V

Binen - Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male. Specification: *batt voltage: dc 12v/24v auto *Charge /Discharge current: 20A *Over discharge Protection: 107v/21. 4v *charge recover voltage: 12. 6v/25. 2v *overcharge Floating charge: 13. 7v/27. 4v *over discharge Protection: 107v/21. 4v *equalization: B01: sealed 14.

4v / b02: gel 14. 2v / b03: flood 14. 6v intelligent solar controller: The product can automatically manage the working of solar panel and battery in solar system. Note: please keep it in cool and well ventilated place to maintain good heat dissipation. Good heat dissipation】: dual mosfet reverse current protection, it is better to shelter them for better heat dissipation, low heat productionALL electronic components generate heat when they are running, avoid direct sunlight exposure or damp place.

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Display 12V/24V - Extends and locks built-in cables. 2. 1. Load > 3. Pv array in accordance with Figure, and disconnect the system in the reverse order 3.

More information about Binen


Similar products



WindyNation 10 Gauge 10 AWG One Pair 10 Feet Black + 10 Feet Red Solar Panel Extension Cable Wire MC4 Connector

WindyNation - The solar cable offered in this listing is 12 AWG and 10 AWG which are the two largest sizes of the four. Extends and locks built-in cables. Two cables with mc4 connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller. The wiring is weatherproof and designed to withstand extreme heat and cold.

Solar panel cable is typically sold in 14, 12 and 10 awg sizes. The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable single core cable Section: 1. 5mm² -- 6mm². Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions.

WindyNation 10 Gauge 10 AWG One Pair 10 Feet Black + 10 Feet Red Solar Panel Extension Cable Wire MC4 Connector - 100% compatible with Renogy MC4 connectors. Using large diameter cable minimizes power loss in your solar panel system. Solar battery】: solar charge controller is only suitable for lead-acid batteries: OPEN, AGM, once the voltage of the battery drop below 8V, lithium, or other batteries. Two cables with mc4 connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller.

12v/24v auto; rated charge & discharge current: 20A; Settable operating modes of loads, fully 4-stage PWM charge management. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc.

More information about WindyNation


Similar products



Renogy MC4 Y Branch Connectors Solar MC4 Connectors Y connector Solar panel mounts in Pair MMF+FFM

Renogy CNCT-MC4Y - Very handy for the assembly of custom Mc4 wires. Both solar cables are terminated with MC4 Connectors. See image #2 in the photo gallery for 10 AWG and 12 AWG solar cable specifications. 12v/24v auto; rated charge & discharge current: 20A; Settable operating modes of loads, fully 4-stage PWM charge management.

Made with copper. Photovoltaic module interconnection cable for use with or without a raceway in accordance with the Wiring Systems, Article 690 in the National Electric Code NEC, NFPA 70 Ul listed solar cable is designed for outdoor use and is moisture, UV and corrosion resistant. The solar cable offered in this listing is 12 AWG and 10 AWG which are the two largest sizes of the four.

Renogy MC4 Y Branch Connectors Solar MC4 Connectors Y connector Solar panel mounts in Pair MMF+FFM - These connectors are also waterproof and resist dust build up. Ce and tuv certified hard plastic;protection Class: Class II Temperature Range: -40C~+90 C. Sold as a pair, these "y-connectors" will maintain the voltage of the solar panel configuration to match the battery size. Y branch mc4 parallel connector 1 male to 2 female and 1 female to 2 male.

Solar battery】: solar charge controller is only suitable for lead-acid batteries: OPEN, lithium, AGM, once the voltage of the battery drop below 8V, or other batteries. Extends and locks built-in cables. Solar cable is manufactured in the USA.

More information about Renogy CNCT-MC4Y


Similar products



Glarks MC3 MC4 Crimper Solar Crimping Tools for 2.5/4/6mm² Solar Panel PV Cable with 6 Pair MC4 Solar Panel Connector and 1 Pair Solar MC4 Connector Assembly Tool Spanner Wrench and a Wire Stripper

Glarks - Photovoltaic module interconnection cable for use with or without a raceway in accordance with the Wiring Systems, Article 690 in the National Electric Code NEC, NFPA 70 Ul listed solar cable is designed for outdoor use and is moisture, UV and corrosion resistant. The solar panel cable offered in this listing is 10 AWG which is the largest diameter of the three.

Two cables with mc4 connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller. Using large diameter cable minimizes power loss in your solar panel system. Compatible with mc4 connectors Also known as MC4 T connectors. Both solar cables are terminated with MC4 Connectors.

Glarks MC3 MC4 Crimper Solar Crimping Tools for 2.5/4/6mm² Solar Panel PV Cable with 6 Pair MC4 Solar Panel Connector and 1 Pair Solar MC4 Connector Assembly Tool Spanner Wrench and a Wire Stripper - See image #2 in the photo gallery for 10 AWG and 12 AWG solar cable specifications. Extends and locks built-in cables. Two cables with mc4 connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller. The wiring is weatherproof and designed to withstand extreme heat and cold.

Solar panel cable is typically sold in 14, 12 and 10 awg sizes. Wire stripper with ultra-precision stripping port design, high-intensity return spring for easy and effortless use. Dual usb port】: the solar charge controller with dual usb ports, usb output: 5v/2A max.

More information about Glarks


Similar products