As an Amazon Associate I earn from qualifying purchases.
1. Smittybilt #ad
2803, Smittybilt Winch Plate Black #adSmittybilt #ad
- Pre-drilled holes and include mounting hardware Some cutting required on OE bumper. Manufactured from 1/4" steel. Black powdercoat finish for long lasting durability. Fits 1987-2006 wrangler tJ/YJ/LJ aftermarket bumpers. Supports up to a 12, 000 lb Smittybilt winch.
2. Smittybilt #ad
2802, Smittybilt Winch Plate Black #adSmittybilt #ad
- Fits 1997 to 2006 tj wrangler, Rubicon and Unlimited. Supports up to a 10, 000 winch with standard bolt pattern, Mounting hardware included.
Made for 1/4 inch steel, powder coated black for long lasting durability. Raised winch plate to accommodate larger bumpers to eliminate roller fairlead interference.
3. Rough Country #ad
Rough Country Winch Mounting Plate for 1987-2006 Jeep Wrangler TJ/YJ, 1189 #adRough Country #ad
- Will accommodate most winches on the market. Uses standard Winch Bolt Pattern. Add d-rings to your stock Bumper using Rough Country Kit 1169. Mounts to your factory front bumper.
|Brand||Rough Country #ad|
|Manufacturer||Rough Country #ad|
4. Smittybilt #ad
2804, Smittybilt Winch Plate Black #adSmittybilt #ad
- Powder coated for long lasting corrosion resistance. Tough 3/8 inch plate construction. Raised winch mount, for roller fairlead. Product type : vehicLE BUMPER.
|Warranty||Limited Warranties Smittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products|
5. EAG #ad
EAG Winch Mounting Plate for Wrangler YJ TJ LJ, 12000 lb Capacity #adEAG #ad
- Easy bolt-on installation. Made for 1/4 inch steel, powder coated black for long lasting durability. The raised design is perfect for oversized bumpers and eliminates roller fairlead interference.
Will accommodate most winches on the market. Fits for 1987-2006 wrangler TJ/YJ. Mounting hardware included. Mounts to factory bumpers.
6. Smittybilt #ad
Smittybilt 76807 XRC Gen 2 Front Bumper #adSmittybilt #ad
- Aggressive, stubby design. Raised corners for better entry and exit angles in extreme conditions. Uhmw slip strips, the ultimate fender-to-fender protection for rock crawling. 1. 75-inch 120 wall overrider and kickers.
Fog light ports. Light mount tabs accommodates lights up to 9" diameter. Ability to accommodate up to 12k winch. Max solid d-ring and jack point mount welded on the inside and out! O. E. Manufactured from 3/16inch cold rolled steel with two-stage textured matte black finish.
7. Smittybilt #ad
Smittybilt Roller Fairlead Mounted License Plate Bracket, 4432 #adSmittybilt #ad
- Drilling Is Not Required. Made of Steel. Protects your roller fairlead from debris and dirt. Easy snap-on installation. Includes 5mm Phillips head screws and nuts. Universal fit for 4 way roller Fairleads.
8. Smittybilt #ad
Smittybilt XRC GEN2 9.5K Waterproof Winch with Steel Cable, 97495 #adSmittybilt #ad
- Your purchase includes one smittybilt gEN2 XRC Winch, 97495 model with 9, 500 lbs. Winch dimensions: 22. 3” l x 5. 4” w x 9. 4” h | product weight: 78 lbs.
Kit comes complete with all wiring required for installation. Completely waterproof, state-of-the-art 500AMP Solenoid. Smittybilt offers a limited lifetime for replacement to the original purchaser on stainless steel products.
Cable type – 93. 5” diameter, wire rope | Motor – 6. 6hp | control – 12” lead | gear-train – 3-stage planetary | Fairlead – 4-way roller. Load capacity. Dual-stage, powder coated products carry a 5-year or 100, 000 mile warrany, whichever comes first. Smittybilt recommends using supplied wiring. Weight capacity: 9, 500 lbs.
9. Smittybilt #ad
76721, Smittybilt SRC Front Grille Guard Bumper with D-ring Mounts Black #adSmittybilt #ad
- Sloping ends for greater tire travel and enhanced entry and exit points. Heavy-duty bumpers are designed for off-road use and abuse. Solid mount d-rings – welded on the inside and out.
Wide front opening allows for winch installation NOTE: requires Winch Plate #2803. One-piece welded design, manufactured from 2" x. 120 wall tube.